Tikka T3 Sporter in .260 Remington with Vortex Diamondback Tactical 6-24x50 FFP Scope with MDT XRS chassis. Also plan on getting the Liberty Precision Machine Anthem S-2 Suppressor.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportDid you cerakote that action/barrel? Whatever color it is, it looks nice!
Thanks, I’m really happy with the rifle. Factory cerakote, tungsten grey is the color.Did you cerakote that action/barrel? Whatever color it is, it looks nice!
Update on the Savage:
Decided to give one of these Arken scopes a try with how cheap they are. Figured if I didn't like it, it could get moved over to a rimfire or such. Gotta say though, my initial impressions have been pretty much like everyone else. It's impressive for its price.
I also tried shooting some AAC 175gr ammo along with some IMI 175gr. That AAC stuff is sketchy. Wish I had a chrono, because it seemed hot as all get out, and would give sometimes as much as 2 inch groups at 100. The IMI seemed to work well.
View attachment 8463997
View attachment 8463998
Man that ss 10x42m brings back memories from the late 90s early 2000. I used it on my personal bolt guns. I kinda miss those rifles.First goods have started to arrive, looking forward to getting this rifle all set-up. Hoping to have it ready to hit the range by the weekend.
Still waiting on rifle (should arrive Thursday, stock, adjustable cheek riser, bipod, and sling.
View attachment 8464491
This is my second one. If I’m not prepared to spend 2k+ on a Nightforce, this is really the only option in my mind. I value reliability and durability over glass quality. I considered the Nightforce SHV 4-14 F1 pretty hard and the SWFA HD 3-9….but at the end of the day I’m ultimately saving for a for a NXS 3.5-15 and the best way to make a rifle usable while saving is the SWFA 10x42.Man that ss 10x42m brings back memories from the late 90s early 2000. I used it on my personal bolt guns. I kinda miss those rifles.
Is that a straight pull 700 action?Strasser RS700 Short Action with Vision Pro chassis. Very impressed with this set up.
View attachment 8465046
Interesting. How does the bolt lock up to prevent blowing back under pressure?Yes sir
It has 4 lugs, and they will pop out in ok in place when bolt goes into battery.Interesting. How does the bolt lock up to prevent blowing back under pressure?
Did you buy the barreled action or complete rifle ? I have been interested in buying this one but really like the looks of your chassis setup.Strasser RS700 Short Action with Vision Pro chassis. Very impressed with this set up.
View attachment 8465046
Barrel action, it is the 6.5 Creedmoor Long range configuration.Did you buy the barreled action or complete rifle ? I have been interested in buying this one but really like the looks of your chassis setup.
View attachment 8465067
What height is your Spuhr mount?Strasser RS700 Short Action with Vision Pro chassis. Very impressed with this set up.
View attachment 8465046
Thanks for the info . I think I will go with the barreled action and get a chassis instead of wasting money on a stock I will end up replacing .Barrel action, it is the 6.5 Creedmoor Long range configuration.
I also ordered several actions. Will build some rifles when they showed up.
Thanks! I have a Vision Pro Chassis on the way and running the exact height. Twins...
Now THAT is a cool rifle, something quite different.Strasser RS700 Short Action with Vision Pro chassis. Very impressed with this set up.
View attachment 8465046
Thanks for the kind words.Now THAT is a cool rifle, something quite different.
How does the action feel on that one?
Beautiful rig, congrats !Strasser RS700 Short Action with Vision Pro chassis. Very impressed with this set up.
View attachment 8465046
Looks great, what stock did you order to replace it with?This rifle is a huge improvement over the Savage 110. Some photos with the factory stock, new stock should be here today.
View attachment 8466655
View attachment 8466656
View attachment 8466657
I wanted to get a McMillan, but I’m planning to hunt with this rifle this year, so couldn’t get one in time. I ended up scoring a good deal on a HS Precision PSV096 in tan with black webbing that was taken off a 700 VS. I had a CZ 527 Varmint with that stock years ago and it fit me well. I’ve got a Mathew’s Fab adjustable cheek riser for it that I’ll be installing tonight as well.Looks great, what stock did you order to replace it with?
Beautiful area to shoot!!View attachment 6284027View attachment 6284028 Here's my Surgeon Scalpel in 260
Socom 762RC can
S&B 3-27x56 PMII
beautiful rifle!M40A5 Started life as a .308 built by GAP.Spec build.Put 900 rounds through it,shot some PRS matches and started looking at 6.5,Decided to have it re barreled in 6.5 Creedmoor Krieger barrel
1 and 8 twist MTU contour.I have to break it in then load development
![]()
![]()
![]()
![]()
Keeping it classy.
remington 700
love the rifles, great setup!Tikka action
Factory 24" barrel
6.5CM
McMillan A5 fully adjustable
Sterk bolt handle, rounded knob and bolt shroud
APA Little bastard brake
Evo bipod
Mountain Tactical bottom metal
Burris XTRii 4-20![]()
![]()
![]()
Sent from my SM-G930V using Tapatalk
What did you use for the grip texture? Sorry if you said already, I might've missed it.Broke out the spade bit, jb weld and "red-neck"ognized the true potential of my kitchen table gunsmithin'.
Added arca rails to the HMR stock and the tikka 6.5 to make tripod use so much easier.
View attachment 8468516
View attachment 8468517
Yup. Love my visons. Nice Rig broVision Pro Chassis
Fit and finish of this chassis is certainly top notch. Blows my MDT out of the water (still great chassis).
The folder is great.
View attachment 8469750View attachment 8469751View attachment 8469752
I have finally seen these in stock in Canada, but aside from the adjustability on the buttstock they look very similar to the ACC elite. Even priced 10% higher. What do you like more about the vision over the MDT?Vision Pro Chassis
Fit and finish of this chassis is certainly top notch. Blows my MDT out of the water (still great chassis).
The folder is great.
View attachment 8469750View attachment 8469751View attachment 8469752
The fit and finish is superior to the Elite. The top cover flows nicely with the lines of the chassis and doesn't appear to be an afterthought like the MDT. I personally like the grip better than the Elite and it comes with a functional bag rider, which MDT has not released yet 1+ years later. The folder is functional and locks up tight. Attention to detail is certainly the biggest attribute to the Vision (they include a torque spec sheet for every screw on the chassis and accessories).I have finally seen these in stock in Canada, but aside from the adjustability on the buttstock they look very similar to the ACC elite. Even priced 10% higher. What do you like more about the vision over the MDT?
Good to know, thanks. A couple hundred dollars more isn't bad anyway in my opinion. I do like the adjustable bag rider on the vision also.The fit and finish is superior to the Elite. The top cover flows nicely with the lines of the chassis and doesn't appear to be an afterthought like the MDT. I personally like the grip better than the Elite and it comes with a functional bag rider, which MDT has not released yet 1+ years later. The folder is functional and locks up tight. Attention to detail is certainly the biggest attribute to the Vision (they include a torque spec sheet for every screw on the chassis and accessories).
Is it worth the extra $$$? For me, I like nice things and I'm willing to pay for it. For others, that's a choice for them to make.
With that said, I'm keeping a few Elites but have one for sale.