100%
Based on my emails it appears I paid on February 28 as I got the confirmation early on March 1.
Super duper doubt
Imagine if the Mousingfield had more bolt lift. SpaceX wouldn’t have to divert satellites over gun ranges.
That’s about the same results I got with my 2014 AT vs 22 ATX
Yeah this was a first. My woman has been with me for 24 yearsHope you got better aim/handling when you’re with your woman
Do they have issues? I’m building a 300 WSM on my AT currently. My 260 has a lot of room left running 142 smk .010 off the lands in these mags. I’m thinking it will run a wsm just fine
I'm shooting 7-6.5prcw in 2 different barrels in my ATX. 180 hybrids and 168 vlds are stuffed way below neck/shoulder to fit in a mag. 180s at mag length limit powder. I single load 180s in one of the barrels and it absolutely hammers but I can't get those results mag-fed. The other barrel is a short carbon barrel shooting 168's at mag length and I'm not giving up too much, a little velocity and maybe some accuracy seating into the shoulder but its not the bullet I was hoping to shoot. Short answer is, short mags work, but you're NOT gonna mag feed and get the same results you could from a longer action. Single loaded 180's below.
I plan to push 178 ELDX out of the 300 WSM
I'm sure you'll be fine. If you wanted to shoot 215's or similar you'd be leaving a lot on the table at mag length.
I’m shooting deer with it. Plan is to 1200 or so. Realistically 700-800 most of the time
The AT-XC bolt is not backward compatible with previous generation actions.
I've taken the locking mechanism out of every rlok head or bipod clamp I own. Just run enough tension it down slide.
I don't know what bothers me more. Those "knots", or the fact that you didn't burn the frayed running end of the 550 off. The whole mess gives me the heebie-jeebies....
Yup, just ship a few full sized pallet crates of the new spring/follower, I'd pay $25, I bet they'd be gone quickly.Accuracy International ATX 10rd Mag Assy w/Heavy Spring and Feed Ramp on Follower 29896BL
Accuracy International ATX 10rd Mag Assy w/Heavy Spring and Feed Ramp on Follower 29896BL For Salewww.eurooptic.com
Be cool to get the heavy spring and follower for us poors who use AW mags.
The pallet-crates are already too full of "definitely not ATX hinges" to accommodate upgrades that make the worlds most reliable sniper rifle more reliable.
All 4 my atx rifles/chassis already hinged up, I just want relaible feeding from cases shorter than 2.85"
Yet people will still try to shoot AI rifles in competition with competition cartridges....
Cons, AI can say the company will support magnum bolts on this rifle, and 3 years later come out with AT-XCD. They’ll state that any improvements will only be on this new version and forget about AT-XC.
Zuess is opposite lug orientation VS AI or CDG action. You may know this but the Zuess is fair bit more finicky with aw mags with 12 4 and 8 o'clock lug orientation, VS AI 2, 6, 10.
Sure, I can do that.
"
