Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I guess when you prefer compromising
i know you get sensitive so i will shut upDat 520us tho....
Even with 24-26” barrels i prefer shorter forends; balances better without autistic amount of weightsDefinitely needs to be shorter but I like short barrels for my use. It wonder if that part of the chassis is available or if it is interchangeable with the r700 short forend
Holy shit blast from the past. I can hear it in my head. What skit and what show again? Escapes me…
Seinfeld.Holy shit blast from the past. I can hear it in my head. What skit and what show again? Escapes me…
Holy shit blast from the past. I can hear it in my head. What skit and what show again? Escapes me…
1.5” will clear forward rails.What scope mount height is this? I'm looking to get a ZCO 5-27 someday and wondering if 1.5" height on the scope mount is enough height for the optic to clear the forend's rail.
Thanks.
It’s a 1.5 on the factory (short) action rail.What scope mount height is this? I'm looking to get a ZCO 5-27 someday and wondering if 1.5" height on the scope mount is enough height for the optic to clear the forend's rail.
Thanks.
Are you kidding? SB over japanese every freaking time brah.... Tbh the 520 us is probably one of the most versatile badass scopes ever made with dtii turrets. Image isn't as great obviously as a full size scope but the size to performance is hard to beat. I doubt I will ever sell my 520s
Quite possibly one of my favourites amongst the 400 odd pages.Well I grabbed a 4306 and slapped it on. Yeah it’s pretty sweet - when I was 17 I always wanted an AI with a SB on it so I guess that ticks it off the list.
View attachment 8486008
View attachment 8486009
All set!
AWSM 300WM / 338LM / 300NM
Pics of the exact screws.New to the forum so don't know where else to post this. Have an AXSA and I am trying to remove the buttstock from the chassis. Tried with heat but the screw for the flushcup and 1 of the screws closest to the action is completely stuck. Anyone have any idea on how to get rid of it?
Pics of the exact screws.
LH Tap is always an option.
Heat and a decent hex bit should be all you need.Thank you, that's what I was afraid of. Would you reccomend the same route on the smaller screw (that connects to the flushcup)?
I use MAPP gas , a block of wood and a big hammer to debond everything.
Heat it until it smokes and smells like burning hair.
Don’t freak out if the shiny aluminum frame goes flat when it’s hot. Just smear oil on it after it cools. It’ll be shiny again.
Use a good 3mm allen socket to remove the screws. Wait until you heat everything up to remove them. They probably have epoxy on the tapered head and on some of the threads.
View attachment 8487834
View attachment 8487835
Got the TT back from service and redid my barricade. All in all a good weekend.
He just wanted to have them give it a once over... No specific incident.
What pray tell happened to the tt?
An actual sub-moa rifle at 800+ yards is a rare sight!
That's not droop, that's inclination for those extremely ELR shots!You must know some one special!!! Your scope isn't drupie like my sub moa model....
View attachment 8488328
In my second PRS match, in quite a bit of rain, after I tanked a stage where I couldn’t see my misses and wasn’t mature / experienced enough to have a plan for this, a very kind RO came up to me and said “Your shooting was extremely consistent — it was consistently one mil low.”View attachment 8488541
-Pew pew pew kapow pew bang kaboom pew pow!
“Shooter I have you for zero.”
-Fuck.
That's not droop, that's inclination for those extremely ELR shots!
In my second PRS match, in quite a bit of rain, after I tanked a stage where I couldn’t see my misses and wasn’t mature / experienced enough to have a plan for this, a very kind RO came up to me and said “Your shooting was extremely consistent — it was consistently one mil low.”
-Stan
Pray tell, what is that little mini-bag looking thing you're running on the ol' whale hump there?View attachment 8488541
-Pew pew pew kapow pew bang kaboom pew pow!
“Shooter I have you for zero.”
-Fuck.
That's exactly what he should have done and every one else on your squad if you are new
That’s G56 classified sir.Pray tell, what is that little mini-bag looking thing you're running on the ol' whale hump there?
I firmly believe that new shooters should receive corrections during the stage, provided theyre clear and concise and do not cause further confusion.