Are you meaning to say, “why not have both the competency to conduct a mag change and also the ability to buy an extended mag?”But on a serious note, why not have both the competency to conduct a mag change and an extended mag?
Not my rifle…
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Are you meaning to say, “why not have both the competency to conduct a mag change and also the ability to buy an extended mag?”But on a serious note, why not have both the competency to conduct a mag change and an extended mag?
However I do claim to have jokes
Suspiciously, no scope in that pic!
You're still AI-Less? Shame on you...I have AI AW magazines. But other than that, no. Please don’t remind me.
I think bolt availability is the issue for both of those now?Any long term thoughts if anyone has gone AXMC vs AXSR and why they chose that? I have an ATX and an MRAD, but really considering grabbing a long action AI.
Buuttt… you have been unfaithful….Hopefully someone will be fire selling an AXSA when I get my bonuses in the spring. I miss being apart of the master class of citizen
I have both (2 MCs, 1 SR). I changed the MC bolts to the SFP versions. I slightly prefer the MC over the SR, but honestly they’re so close that I wouldn’t care either way. They each have some pluses/minuses, but they’re pretty minor.Any long term thoughts if anyone has gone AXMC vs AXSR and why they chose that? I have an ATX and an MRAD, but really considering grabbing a long action AI.
You need a long action with all of the bolts. It is amazing to have a rifle that can do 6mm to 338 LM.Any long term thoughts if anyone has gone AXMC vs AXSR and why they chose that? I have an ATX and an MRAD, but really considering grabbing a long action AI.
Hopefully someone will be fire selling an AXSA when I get my bonuses in the spring. I miss being apart of the master class of citizen
I have been, and I feel unclean. But I hope that I may be able to repent and be accepted once againBuuttt… you have been unfaithful….
You need a long action with all of the bolts. It is amazing to have a rifle that can do 6mm to 338 LM.
The MC is great. Not to open a can of worms, but the MC is bonded, and the SR is not. There aren't many more differences than that, provided you are right-handed. RH people will get the SFP assembly. Southpaws are SOL and only get LFP. Yes, you can bush your FP and bolt. I have strong opinions about why that is dumb as a southpaw. The bottom line is that If you're a southpaw, then buy the AXSR and buy everything you can in terms of bolts and firing pin/shroud assemblies before they are no longer available.
You'll never shoot the MRAD again, so you might as well sell it to fund the LA AI
Confession and repentance shall bring you back into the fold, we shall prepare the fatted calf…I have been, and I feel unclean. But I hope that I may be able to repent and be accepted once again
My 300 win mag bolt is LFP but my 308 bolt is SFP. I love my AXMC and I don’t need what you get with the ASR. I put a ARCA rail on mine and put on a RRS foregrip. The barrel changes are the same and accuracy is the same. The ASR has the new comp trigger but I haven’t ever had any issues with the AXMC trigger. I personally like the 3 position safety and financially speaking I think the AXMC is the better value. I run mine in 6.5CM mostly and I use the short action magazines with the adaptor but if were starting from scratch I would ditch the adapter and run the larger short action magazines that were designed with the ASR.I think bolt availability is the issue for both of those now?
And don't forget that the MC comes with the large firing pin which may not like small rifle primers
With the LFP 308 bolt I also ran into primer issues with Berger factory small-primer 6.5CM ammo (but never Hornady ELD Match, which is large primer). Last I heard, Berger has discontinued small primer 6.5 ammo though.I’m familiar with the LFP vs SFP on the MC, but the only way I’d probably run into an issue is with those 6creed-308 rounds, which they now make the SFP for.
With enough know how and some machines, anything is possible.Will a AICS axsa butt stock fit a at-x ? I assume no
I agree about the AXMC. It is just about as perfect as you can get in a rifle. The only reason I will buy an SR is because I can't get a left-hand 300 WM bolt body (LFP or SFP), any SFP bolt body, and shroud assembly.My 300 win mag bolt is LFP but my 308 bolt is SFP. I love my AXMC and I don’t need what you get with the ASR. I put a ARCA rail on mine and put on a RRS foregrip. The barrel changes are the same and accuracy is the same. The ASR has the new comp trigger but I haven’t ever had any issues with the AXMC trigger. I personally like the 3 position safety and financially speaking I think the AXMC is the better value. I run mine in 6.5CM mostly and I use the short action magazines with the adaptor but if were starting from scratch I would ditch the adapter and run the larger short action magazines that were designed with the ASR.
Little did I know that when I was taking pictures of the AI mafia on Ironman today that I'd catch a member of the pale brown master race from the Hide.
Maybe, probably, maybe not.Will a AICS axsa butt stock fit a at-x ? I assume no
I agree about the AXMC. It is just about as perfect as you can get in a rifle. The only reason I will buy an SR is because I can't get a left-hand 300 WM bolt body (LFP or SFP), any SFP bolt body, and shroud assembly.
I put a comp trigger on my AXMC and my AT, and it is a nice trigger. Not sure if I like my OG AI trigger better but don't matter as now I have both for each AI.
Regardless, I won't be selling either my MC or AT when the SR comes along.
The comp I had in my ATX was a phenomenal trigger. I prefer the original trigger in my AT’s as they work well for what I use the rifles for. But when specifically target shooting and shooting for groups the comp trigger was a noticeable improvementIf you had to rate it, how much of a percentage improvement is the comp trigger on the MC?
See if Manzella can spin one up. Had a 260 chambered for my AT from himAnyone have a line on an AXMC 260 barrel or two?
If you had to rate it, how much of a percentage improvement is the comp trigger on the MC?
Lies.If I could count how many people I know who have had repeated failures
....
This is why I prefer the original and won’t swap to the comp. Although realistically the comp failure rate is very low and has been shared by AI on here. Right down to the amount they see issues with a yearIf I could count how many people I know who have had repeated failures
....
Wait…you can count?If I could count how many people I know who have had repeated failures
....
Way to ruin the momentWith enough know how and some machines, anything is possible.
Basically, I don’t know
Get in line there, partnerHopefully someone will be fire selling an AXSA when I get my bonuses in the spring. I miss being apart of the master class of citizen
That’s my cousin Bobo!
I think I have a left gain twist in 260.Anyone have a line on an AXMC 260 barrel or two?
Will a AICS axsa butt stock fit a at-x ? I assume no
I am curious about this as wellIt’s been a while but has anyone come up with a 223 conversion for the AXSR????????????????
Will make sure to arrive with a non manbun caliber barrel installed for next range visit.Little did I know that when I was taking pictures of the AI mafia on Ironman today that I'd catch a member of the pale brown master race from the Hide.
If I had the option I would have gone with the AX MK3 since it retains some of the features of the AXMC that I'd like (notably it still has the detent hole for magwell converter) but has all the AXSR features that matter as well.I think bolt availability is the issue for both of those now?
And don't forget that the MC comes with the large firing pin which may not like small rifle primers
Not really? I think you can go to euro and MH today and get pretty well sorted if you’re not LH.I think bolt availability is the issue for both of those now?
Sawtooth RiflesAny sources for an AT ARCA rail? Thanks
This was my main reason for not liking the AX for positional shooting.Been trying to find a bag/solution for the axsa hump for a bit here for better stability for prs.
I saw this a while ago from area 419 but they were discontinued and I was never really sold. However someone was selling a used one here so I snagged it just to try. Seems like a solid solution and I get much better contact across the whole rail with a bag.
Only compromise is I can’t slide my bipod have to quick detach and move to rail but I do that a lot less in stages than trying to get stable off bags.
This is also a lot lower profile.
View attachment 8514236View attachment 8514237
To confirm: this is from a factory AI Lothar Walther 24" 1:12 twist barrel?
Same. This seemed to solve my problems. I was really debating building a prs rig and I probably still will later down the road but I didn’t want to sell this bad boy because I love it.This was my main reason for not liking the AX for positional shooting.
I still think it's one of the nicest looking AIs. Absolutely loved mine for prone/ bench/ tripod shooting. Just getting it to settle on a bag. I don't recall what you have as an option back when I had mine... might have changed my mind. If I was going to do a prs rig I'd just stick with an ATX... I've handled enough now to know the only thing holding me back at that point is my crap shooting skills.Same. This seemed to solve my problems. I was really debating building a prs rig and I probably still will later down the road but I didn’t want to sell this bad boy because I love it.
I guess it happens. The LW 1:12 that came with my AT was a laser. I regret selling it, but I love my 27" Proof Competition contour 1:10 twist. I can shoot the 185 Berger bullets without any issuePersonal Anecdote:
My first Accuracy International AT308 had a 26” Lothar Walther 1/12” barrel (~ 2014).
My first and only bolt gun for quite some time.
I could never get it to group adequately.
This setup started me down the path of handloading.
Thought I could improve its accuracy.
Got fairly adept in making my own “technically and dimensionally perfect” handloads, but shooting remained horrible.
At around 3,000 to 4,000 rounds or so, thinking it was already shot out from the newbie handloader abuse that I heaped on it, I replaced the barrel with an AINA 26” AX profile 1/10” barrel by Dave Tooley.
Bugholes!
Turns out my shooting wasn’t the issue…
Later, I find out that compared to brass from my AINA barrel, the Lothar Walther specimen’s fireformed cases were rather long and had bloated bases - not on the same level as MG fired brass, but bad enough that I needed a Small Base FLS Die to “normalize” them for use in the newer barrel.
Turns out my first barrel was probably a dud…