Only time I liked the green/tan combo like this is when the green was multicam.
-
Having trouble using the site?
Contact support
Hmmm I’m on the fence. I super appreciate you fellas for snapping some pics!
Anytime bud. I feel like it would look better with the new green (the rear of my pics) than the old green.
I’ve got a ‘23 AT, so it must be the new green.
I have a green barrel too. Was black from Mile High but I had em coat it because at the time I had an AX and I really liked that AX “all green” factory look.
Now the AX is gone and have to say, don’t miss it.
Here’s an iPhone hack recolor job of your pic. If you squint, this is basically what my rig would look like.
Below, the sold AX and current AT.
I’m going to let it sink in for a bit before I do anything rash.
There’s too many black accents for it to look as good as you want it to.
Yeah, I tend to agree with you. An FDE AT might look pretty good with a RAL8000 scope though.
And a AX FDE…mmmm ok now I gotta just stop this line of anti-Sage green immoral thought lol RAL8000 is the siren that is trying to wreck me upon the FDE shoals of Sodom/Gomorrah.
the green skins look best with darker more muted "tans" or "browns". burnt bronze or a dark earth brown.
Fde is how she normally sits. That's until I get off my ass and multicam a set of skins. Or old chocolate chip desert camo...hmmmmm.
I like it man! Rocking a little bit of that SCAR 50 shades of FDE thing, which is something I appreciate. Looks a lot better than a sage green AT with the same scope (or at least less discombobulating/unusual).
The epitome of an AI thumb hole working gun. Makes me miss the thumb hole AT, but just a little… ATX chassis is still superior in every way
Last edited:
I love my AT and won't sell it for anything but I'd be lying if I said I didn't want an atx/xc also. There is one at my range in a m81 woodland camo that looks so nice.
had an AX, sold it. still have my AW/ATs.
couldn't get over the tall height over bore and the gun balance just felt wrong. i did like the butt stock though.
I had an AX and felt similar. Prone I don't think there is anything more comfortable but off a bag on obstacles it was just so tall and tippy I couldn't shoot it well. Sold it and wasted a few years of my life and thousands of dollars just to find an AI again.
He's been there the last 2 Saturdays I went. It's mine and my wife's anniversary Saturday so idk if I can get away with it but we'll see lol
A sling!
Anybody remember that time when some people found out that the QD sling cups on the AT were sized wrong, and couldn’t retain slings?
Anyone have some comparison pictures of the pale brown or dark earth chassis next to something Magpul fde or KAC taupe or something similar? Hard to tell from pics on the website. Thanks in advance.
If I can get the pic tonight I have both ai browns and bcm and magpul fde.
Here you go. AI tan and brown with.
Magpul fde
Kac taupe
S&b Pantone
Geissele DDC
Modlite tan
Armageddon gear Coyote
#50shadesoftan
It’s also an AE model, MKI or MKII and not an AT, not that it matters… Sad thing is that trigger is probably the best trigger AI ever produced, except for maybe the early target rifles. My son had an AE MKIII and it was a phenomenal rifle…
The AI FDE is just a touch darker than the old Glock FDE. It is definitely more brown than tan.
Bought it a few years ago when they were easy to get along with like 4 mounts. The only luck I have in life is buying gun crap that somehow skyrockets in value not long after.
Well it tells me you have been doing this for a while.
Remember summer 2021 during covid how hysteric the market was? Your boy made a killing on mod0 mod1 sr15s
I saw that video too. I do like Phil, but videos like that are nothing other than a not-so-subtle flex. I dont care how much your rig cost dude...
That was CTSA in New Braunfels. I'm a member at the shorter public range next door, but working on a spot at this place. Only goes out to ~550 but it's about the only option for +300 within a couple of hours.
Recently traded my at-x chassis for the at & vision combo that was listed on here.
Weight was a concern since i mostly shoot hunter matches. Looks like i should be good with my harvester back on and maybe the nv bridge pulled.
IIRC he said that $12k was MSRP and he didn’t pay that out of pocket as a sponsored shooter.
-Stan
In the world of youtube, "my 12k rifle" is a much more clickable title than "My prs rifle breakdown". All about the numbers lads.
I dont think anyone is bragging about spending that on a rifle - in the context of grownup hobbies, guns are cheap AF.
I dont think anyone is bragging about spending that on a rifle - in the context of grownup hobbies, guns are cheap AF.
Last edited:
So you have an atx in an at chassis
Recently traded my at-x chassis for the at & vision combo that was listed on here.
Weight was a concern since i mostly shoot hunter matches. Looks like i should be good with my harvester back on and maybe the nv bridge pulled.
Yup! I loved my at-x so much i decided to get an at-xc. Always liked the AT with thumbhole stocks so traded the atx chassis for this setup since i dont want an atx and a xc. My plan was to sell the vision forend and just have a complete AT but now i have it in hand the vision setup is nicer than i expected.
Here’s a good deal on an ATX with folded, weights, and a bag rider if anyone is looking. It’s at a Cabela’s so they’ll send it to any Cabelas or bass pro for pickup for free.
www.gunsinternational.com
Accuracy International ~ AT-X ~ 6.5 Creedmoor
Accuracy International ~ AT-X ~ 6.5 Creedmoor for sale online.
www.gunsinternational.com
That’s a hella dealHere’s a good deal on an ATX with folded, weights, and a bag rider if anyone is looking. It’s at a Cabela’s so they’ll send it to any Cabelas or bass pro for pickup for free.
Accuracy International ~ AT-X ~ 6.5 Creedmoor
Accuracy International ~ AT-X ~ 6.5 Creedmoor for sale online.
my AXSR forearm just came loose after a short ride in the sxs and 5 rounds of 300nm. oddly enough, 4 of 5 rounds were clustered in a sub 1/4MOA knot and the other was 1/2" away. i didn't notice til i was trying to get this 338U SR unstuck.
per manual, i tightened the two hex screws to 45 in/lbs. feels solid again, but how long til it comes loose again? are there more than just these 2?
are you guys putting loctite or something on these screws?
per manual, i tightened the two hex screws to 45 in/lbs. feels solid again, but how long til it comes loose again? are there more than just these 2?
are you guys putting loctite or something on these screws?
This is the kind of thing that makes me want to just stick with my AT’s. There’s just too many screws on these newer chassis for my liking.
Good catch, I fixed the post. 308, also looking for a 6GT, steel quality blank on that one is fine.
Similar threads
