He's been there the last 2 Saturdays I went. It's mine and my wife's anniversary Saturday so idk if I can get away with it but we'll see lol
A sling!
Anybody remember that time when some people found out that the QD sling cups on the AT were sized wrong, and couldn’t retain slings?
Anyone have some comparison pictures of the pale brown or dark earth chassis next to something Magpul fde or KAC taupe or something similar? Hard to tell from pics on the website. Thanks in advance.
If I can get the pic tonight I have both ai browns and bcm and magpul fde.
Here you go. AI tan and brown with.
Magpul fde
Kac taupe
S&b Pantone
Geissele DDC
Modlite tan
Armageddon gear Coyote
#50shadesoftan
It’s also an AE model, MKI or MKII and not an AT, not that it matters… Sad thing is that trigger is probably the best trigger AI ever produced, except for maybe the early target rifles. My son had an AE MKIII and it was a phenomenal rifle…
The AI FDE is just a touch darker than the old Glock FDE. It is definitely more brown than tan.
Bought it a few years ago when they were easy to get along with like 4 mounts. The only luck I have in life is buying gun crap that somehow skyrockets in value not long after.
Well it tells me you have been doing this for a while.
Remember summer 2021 during covid how hysteric the market was? Your boy made a killing on mod0 mod1 sr15s
I saw that video too. I do like Phil, but videos like that are nothing other than a not-so-subtle flex. I dont care how much your rig cost dude...
That was CTSA in New Braunfels. I'm a member at the shorter public range next door, but working on a spot at this place. Only goes out to ~550 but it's about the only option for +300 within a couple of hours.
Recently traded my at-x chassis for the at & vision combo that was listed on here.
Weight was a concern since i mostly shoot hunter matches. Looks like i should be good with my harvester back on and maybe the nv bridge pulled.
IIRC he said that $12k was MSRP and he didn’t pay that out of pocket as a sponsored shooter.
-Stan
In the world of youtube, "my 12k rifle" is a much more clickable title than "My prs rifle breakdown". All about the numbers lads.
I dont think anyone is bragging about spending that on a rifle - in the context of grownup hobbies, guns are cheap AF.
I dont think anyone is bragging about spending that on a rifle - in the context of grownup hobbies, guns are cheap AF.
Last edited:
So you have an atx in an at chassis
Recently traded my at-x chassis for the at & vision combo that was listed on here.
Weight was a concern since i mostly shoot hunter matches. Looks like i should be good with my harvester back on and maybe the nv bridge pulled.
Yup! I loved my at-x so much i decided to get an at-xc. Always liked the AT with thumbhole stocks so traded the atx chassis for this setup since i dont want an atx and a xc. My plan was to sell the vision forend and just have a complete AT but now i have it in hand the vision setup is nicer than i expected.
Here’s a good deal on an ATX with folded, weights, and a bag rider if anyone is looking. It’s at a Cabela’s so they’ll send it to any Cabelas or bass pro for pickup for free.
www.gunsinternational.com
Accuracy International ~ AT-X ~ 6.5 Creedmoor
Accuracy International ~ AT-X ~ 6.5 Creedmoor for sale online.
www.gunsinternational.com
That’s a hella dealHere’s a good deal on an ATX with folded, weights, and a bag rider if anyone is looking. It’s at a Cabela’s so they’ll send it to any Cabelas or bass pro for pickup for free.
Accuracy International ~ AT-X ~ 6.5 Creedmoor
Accuracy International ~ AT-X ~ 6.5 Creedmoor for sale online.
my AXSR forearm just came loose after a short ride in the sxs and 5 rounds of 300nm. oddly enough, 4 of 5 rounds were clustered in a sub 1/4MOA knot and the other was 1/2" away. i didn't notice til i was trying to get this 338U SR unstuck.
per manual, i tightened the two hex screws to 45 in/lbs. feels solid again, but how long til it comes loose again? are there more than just these 2?
are you guys putting loctite or something on these screws?
per manual, i tightened the two hex screws to 45 in/lbs. feels solid again, but how long til it comes loose again? are there more than just these 2?
are you guys putting loctite or something on these screws?
This is the kind of thing that makes me want to just stick with my AT’s. There’s just too many screws on these newer chassis for my liking.
Good catch, I fixed the post. 308, also looking for a 6GT, steel quality blank on that one is fine.
2 ugga duggas on the impact and they’re not moving for sure!!
Like I always say…
Its tight enough once it spins freely and when the ring caps touch on both sides.
Never had an issue with my forend loosening, and I put em to 35in/lb. The only bolt on mine that has come loose is the fuckin cheek riser bolt. Torqued down and witness marked. Still loose. Put a drop of blue loctite like 3,000rds ago (guesstimated without looking in the maintenance book) and zero issues with slippage.
Maybe a full clean/degreasing of the threads and bolts is needed? Try that. If still loosening, just pop a drop of blue loctite, pop some witness marks, and send it.
And a friendly reminder…go flush your trigger with lighter fluid. Friends don’t let friends not flush their AXSR triggers.
My advice to @BurtG is always TIG weld. Well, now that I think about it, Burt is more of a
Just put more tq on it.
45in might work.
Rail came off once at a match, i just cranked till they stoped. Done
Pro tip... if you need a longer screw just keep tightening it until it's the length you need.
1300 rounds. But it’s a 308
Firearms - AI ATX with AXSR Stock Package
Posting for a friend of mine. 6k for entire package ATX configured with AXSR stock and bedded (2) 24” Bartlein 6.5 CM barrels The one on the rifle has 930 rounds on it. The other one has roughly 400. (1) 24” Bartlein 6 CM barrel. Roughly 1400 rounds on it so almost burnt out but still...
www.snipershide.com
Gotta be a ruger, dudes only running a vortex.
Did someone say Poor?
I’m the king of the Poors
I have a daisy red Ryder with an Arken
I will gladly be that one-shot wonder poor.
"That's what he said".
"That's what he said".
Dude, didn't you know that the guys at Nightforce have Arken posters hung up in their closets? That's what the YouBoobers say anyway...
Had a problem with the AXMC yesterday.
Got a few "clicks" when I was expecting a "bang"
It was like the firing pin was getting stuck in the bolt body and not going all the way forward, but then also would not go past half-cocked until I moved the safety to the middle position, ran the bolt, and then moved it back to fire.
Imma clean it to see if that helps but is there anything else that I should be looking at?
Got a few "clicks" when I was expecting a "bang"
It was like the firing pin was getting stuck in the bolt body and not going all the way forward, but then also would not go past half-cocked until I moved the safety to the middle position, ran the bolt, and then moved it back to fire.
Imma clean it to see if that helps but is there anything else that I should be looking at?
