-
Having trouble using the site?
Contact support
Or just source some screws that are the same length and diameter but with a slightly different thread pitch and grind them in with an pneumatic impact wrench.
2 ugga duggas on the impact and they’re not moving for sure!!
Like I always say…
Its tight enough once it spins freely and when the ring caps touch on both sides.
Never had an issue with my forend loosening, and I put em to 35in/lb. The only bolt on mine that has come loose is the fuckin cheek riser bolt. Torqued down and witness marked. Still loose. Put a drop of blue loctite like 3,000rds ago (guesstimated without looking in the maintenance book) and zero issues with slippage.
Maybe a full clean/degreasing of the threads and bolts is needed? Try that. If still loosening, just pop a drop of blue loctite, pop some witness marks, and send it.
And a friendly reminder…go flush your trigger with lighter fluid. Friends don’t let friends not flush their AXSR triggers.
My advice to @BurtG is always TIG weld. Well, now that I think about it, Burt is more of a
Just put more tq on it.
45in might work.
Rail came off once at a match, i just cranked till they stoped. Done
Pro tip... if you need a longer screw just keep tightening it until it's the length you need.
1300 rounds. But it’s a 308
Firearms - AI ATX with AXSR Stock Package
Posting for a friend of mine. 6k for entire package ATX configured with AXSR stock and bedded (2) 24” Bartlein 6.5 CM barrels The one on the rifle has 930 rounds on it. The other one has roughly 400. (1) 24” Bartlein 6 CM barrel. Roughly 1400 rounds on it so almost burnt out but still...
www.snipershide.com
Gotta be a ruger, dudes only running a vortex.
You have to have a sense of humour to put a Vortex on an AI. Or you're a one-shot wonder poor ...
Did someone say Poor?
I’m the king of the Poors
I have a daisy red Ryder with an Arken
I will gladly be that one-shot wonder poor.
"That's what he said".
"That's what he said".
Dude, didn't you know that the guys at Nightforce have Arken posters hung up in their closets? That's what the YouBoobers say anyway...
Had a problem with the AXMC yesterday.
Got a few "clicks" when I was expecting a "bang"
It was like the firing pin was getting stuck in the bolt body and not going all the way forward, but then also would not go past half-cocked until I moved the safety to the middle position, ran the bolt, and then moved it back to fire.
Imma clean it to see if that helps but is there anything else that I should be looking at?
Got a few "clicks" when I was expecting a "bang"
It was like the firing pin was getting stuck in the bolt body and not going all the way forward, but then also would not go past half-cocked until I moved the safety to the middle position, ran the bolt, and then moved it back to fire.
Imma clean it to see if that helps but is there anything else that I should be looking at?
On my AT, if I pierce primers , fragments will find their way into the bolt body and I will have the same problem. I would just pull your firing pin/spring assembly out of the bolt body and then dump out whatever is in your bolt and see what you have.
Winner Winner.
I wasnt even checking for blown primers yesterday but sure enough little primer bits came out of the bolt body.
6.5 Creedmoor Norma 130 match. I was using the LFP because that ammo uses large primers, but I guess I'll switch back to the SFP
Yep, same happened to me a long time ago. Pulled the pin assembly out, dumped out a couple of primer discs, and back to working again.Winner Winner.
I wasnt even checking for blown primers yesterday but sure enough little primer bits came out of the bolt body.
6.5 Creedmoor Norma 130 match. I was using the LFP because that ammo uses large primers, but I guess I'll switch back to the SFP
AI...it's a system....but the primers aren't part of the system
I gotta say I think 6.5x47 is my favorite caliber. You can't load that thing wrong. I regret resizing everything I have to 6x47. 6x47 is still nice but not as idiot proof as 6.5x47. Fun fact, first match with a 6.5x47 was also the first match I won an open class match.
That’s even factory 139 scenar ammo. Picked up a couple boxes till I get time to reload in a few weeks.
If it helps... this was with varget out of a 26" barrel (possibly 24, it's been a while). 130eldm, 140smk and 142smk. The 130 didn't hold together at 800 and I ran the 142smk at 36.8. Those targets are 1/2"
I’m shouting a 6.5X47 AX using 37.5gr N150 and the 130 ELD-M to mag length. It prints tiny groups.
If you’re shouting maybe you should use earplugs…
In case anyone is looking for a pale brown Cerakote color match this is what I came up with. (Grip section and trigger guard are home brew color)
H-199 ratio 13/32 about 40%
H-265 ratio 13/32 about 40%
H-187 ratio 6/32 about 18%
catalyst 15:1
My mixture was
13.5G of 199 and 265
6G of 187
Total of 33 plus 1.67G of catalyst.
Hope this helps someone as there’s no info on it out there.
H-199 ratio 13/32 about 40%
H-265 ratio 13/32 about 40%
H-187 ratio 6/32 about 18%
catalyst 15:1
My mixture was
13.5G of 199 and 265
6G of 187
Total of 33 plus 1.67G of catalyst.
Hope this helps someone as there’s no info on it out there.
Attachments
This new auto correct on apple is driving me insane. I need to proof read my posts.
Anyway excuse for a AI photo.
Attachments
Looks great!
Recently traded my at-x chassis for the at & vision combo that was listed on here.
Weight was a concern since i mostly shoot hunter matches. Looks like i should be good with my harvester back on and maybe the nv bridge pulled.
How’s it balance as setup here? I’m guessing there is no internal weights here.
Anyone here have the specs for the AXSR’s:
-Action Bolts
-Trigger Roll Pin
-Mag Release Roll Pins
-Action Bolts
-Trigger Roll Pin
-Mag Release Roll Pins
Can someone please explain why Vortex gets so much hate in this thread? While not a fan boy, I've used a lot of scopes that are worse than the G3 Razor.
Posturing. G3 Razor is a really good scope, but I have a Theta on my AI so as not to be ridiculed.
I've had 2 gen 2 razors in my life....yes....even one on an AI. At the time they were great scopes for the money but at today's standards the G2 razor at least has a lot of competition with better or equal glass and more reticle options in a lighter weight package. They did fall short optically for me, particularly with backlit berms with targets you couldn't make out anything vs my S&B which had no problem. Only looked through a G3 quickly but not enough to make an educated opinion. Always loved how you zero them though.
Just fun to give shit to each other about it....kinda like Milwaukee vs. Dewalt kinda deal.
If you're poor, just say you're poor. It's okay. No one is judging you.
And then silently unsubscribe from the AI thread in shame.....
And then silently unsubscribe from the AI thread in shame.....
Vortex?
More like Poortex
Am I right……am I right!!!
More like Poortex
Am I right……am I right!!!
I sit in my paid off home, having driven there in my paid off car, and I put down my financial statements indicating I can pay for any college my children want in cash, so I can go do some DFAT dry fire with my AI AT and my Leupold MK5 5-25x56mm with Illuminated TMR reticle.
Work hard. Save a lot. Buy whatever you want.
-Stan
Work hard. Save a lot. Buy whatever you want.
-Stan
I'm on a Vortex budget because all those trips to your mom's house add up...
Gotta be this one. It says “Sniper” right on the box!Thanks guys. I understand now.
If you like the G3 reticle, I think it's a great option. But you do only get one reticle option.
Now back on topic.... What ball ammo shoots best out of an AI?
Attachments
My 16.5” shorty .308 for deer hunting
Buy some cheap asian ammo. It'll match your Vortex.
Finally finished, managed to convert the fixed AT to folding and get the AW skins on….
Now for a 6.5x47L and 6GT barrel
Green skins look great! You oughta’ consider drilling one more hole in the fore end and one for the barrel clamp- it’s really not a big deal.
Similar threads
