Search results

Search the forum Search Articles
  1. I

    Brass Cleaning and Annealing for SH Members!

    As per normal from our last transactions (over a couple years) Bob got my 6 slr brass back in a timely fashion. I have used him for three or four calibers and the work is very nice with quick turnaround. locally I can get the brass work done but the timing and cleaning are added on Bob's end...
  2. I

    6 SLR vs 6 Creedmoor with H1000

    loud and proud, I am running the 6 slr for prs, 105 bergers or 107 smk, win brass, 210m, and H1000, 46.9 grains drives the 105's @ 3114fps a 26" benchmark 8 twist I was at 47.4 or 47.5 but I backed it down cause some matches have speed limit of 3150. I chose the H1000 too try and max...
  3. I

    devilddog55 is gtg

    he was the seller, smooth transaction, prompt shipping good comunication Idahoorion
  4. I

    DLC recomendations

    tactical panda, the bolt of the tl3 is already coated with np3, It is hard to improve on IMO. I would leave it alone and just DLC coat the receiver. you'll like it. I have a ion bonded borden that is on it's fourth barrel and it's held up well, the only spots that show wear is a couple of...
  5. I

    Hawk Hill pic rail mounted data card holder - thoughts?

    Shameless plug here for a new product put out by a fellow IDPRS shooter Brady Lamm. Blammenterprises.com works well and is 40 bucks and modest shipping. Idahoorion
  6. I

    Ballistic Calculator for Mil / Mil?

    Strelok Pro gives you the choice of truing bc or Fps. It's a good app and it was 12.99 (or thereabouts) at Google play Idahoorion
  7. I

    Gunsmithing Best release agent for Devcon?

    One shot spray lube has worked for "insurance" along with wax for me. My router cleanup just isn't up to Chad's photo tho.
  8. I

    Seating Depth Variances

    Rerun, I have some loads that were very jump tolerant in testing. Like .020 to .030 all shot the same. Do your testing and if this is so it makes the loading much easier. this is similar to a powder node that is very wide. Some bullets are known for being very specific in where they want...
  9. I

    6 dasher brass forming

    180 lapua hydro formed brass in the mail today. I sent them Friday to DJ custom brass, 8 days later they are waiting for me at my mail box. pretty speedy service. had 3 split shoulders. and he charged .60 per piece. plus the freight. will be shooting this week! Idahoorion
  10. I

    6 dasher brass forming

    Mines a Rem, just had to cut the ejector spring a little as the brass mouth was getting dented on ejection. Using primal rights mag kit. If I run it very slow it will leave the brass in action. med or faster ejection it comes out nice. I am lusting after a TL 3. idahoorion
  11. I

    6 dasher brass forming

    Bodhisafa, norma dasher brass will last, my experience with it was I couldn't load it like the lapua guys. It was a 100 fps behind and I still had sticky bolt on occasions, those 20 I just did in lapua, after fireforming I ran above the threshold for sticky brass and some ejector marks with...
  12. I

    6 dasher brass forming

    Did my first 20 the other day with BoilerUP's method, (I used 29 gr varget) and then loaded those cases to check speed/consistency. no issues, So I have a almost a couple hundred to do. phxfa are you saying that you have or know someone who has used the hydro form and the brass was...
  13. I

    6slr

    Gilbert, my slr I am running H1000, I am trying to the to do the longevity thing as well as speed, I am at 46.9 with win brass, 105/107 and 20k jump, 3120 fps, 26" benchmark, I did shoot some H 4831 as my gunsmith said that is the deal with the slr. I got very good accuracy but no better...
  14. I

    How far off the lands for Berger 130 AR hybrids and 140 Target VLD

    I ran the 130's 20k jump, they were quite accurate and easy to load, I used them in two rifles with the same reamer. Since then one of the rifles on a long action has had the throat extended out so I can seat 140's or 143s out in the neck, Makes a long jump for the 130's. they shoot...
  15. I

    ++Bighorn TL3 Builds++

    she looks great, I assume you left the bolt coated as it came and what is the finish on the action/bolt knob? looks like aics mag? did you consider the aw? bet it shoots great! congrats idahoorion
  16. I

    Gunsmithing Stock bedding necessary?

    Parshal, my mini chassis never lived up to billing until I bedded the lug and tang area, it tightened up the groups by taking out the inconsistent shot. I should have don't it first thing. Idahoorion
  17. I

    Rifle Scopes LRHS opinions

    Midway's running a sale on the Bushnell Tac Elite ERS, it 3.5-20 with locking turrets, the model up from the old DMR. They are nice scopes that used to retail from 1500 up. Midway has them for 1200. in FDE. glass on a par or better than the LRHS and better features for comp type or longer...
  18. I

    Sat phone rentals

    "Thanks again all for the info. I went with a Delorme InReach SE, seems like a good combo of service and price for what I need. Going to try it out this weekend. Will update with a review of sorts." good move, I was a early adopter of spot but the inreach with texting (both send and receive)...
  19. I

    PX Feedback Section - Quickly see if your buyer or seller is GTG

    Bought a stock from Conrad, he was great, prompt shipping, good coms, item just like he said. Idahoorion
  20. I

    Punch list for repairs

    Please update my post count, had 315 on the scout site as blueorion to add to these from the legacy site thanks Paul
Top Bottom
Back
Home
Forums
Merch
Alerts