Accuracy International AT-X

[deersniper]

It’s called an opinion. It literally can’t be “wrong” by definition. Each has their pros and cons. But if you think the entire gun industry chose wrong then that’s certainly an opinion you’re entitled to.

The industry “” can’t use the superior system

The key slot system on AI rifles was designed by us and we have a patent pending on the design. Others have copied it so that is why you might think it is the same.
Tom Irwin
Accuracy International

 

[ForgeValley]

The industry “” can’t use the superior system

And for a quick change barrel system like my LMT, mlok makes absolutely zero sense, because you have to remove all the mlok attachments to get the barrel out. If you've got weights all the way down the rail like hic28s pic above, total pain in the ass.

Don't know if mlok on the atx would have the same problem or not.

 

[generalzip]

And for a quick change barrel system like my LMT, mlok makes absolutely zero sense, because you have to remove all the mlok attachments to get the barrel out. If you've got weights all the way down the rail like hic28s pic above, total pain in the ass.

Don't know if mlok on the atx would have the same problem or not.

Hence the above comment about making the rail slightly wider to accommodate said interference.

 

[generalzip]

The industry “” can’t use the superior system

“Wouldn’t anyway”

 

[Tree]

Tried searching and could not find info. thought I read in this thread what the scope rail screw specs are. Looking to get replacement ones and hoping I didn’t have to read 78 pages in this thread to find the info.

 

[4O6shootist]

Tried searching and could not find info. thought I read in this thread what the scope rail screw specs are. Looking to get replacement ones and hoping I didn’t have to read 78 pages in this thread to find the info.

Torque specs are 35 in-lbs and blue loctite. Not sure on the actual screw specs, I don't want to give you the wrong info.

1 page back........if you're removing the factory rail, heat the screw with a butane torch, soldering iron, something. The alloy is soft and the thread lock from AI is abundant!

 

[Tree]

1 page back........if you're removing the factory rail, heat the screw with a butane torch, soldering iron, something. The alloy is soft and the thread lock from AI is abundant!

One page back had the torque specs. I was looking for what thread and length they are. I might of missed it on 1 page back but it is getting late after all.

 

[Maciej]

Took it to the range to sight in, moved the Nightforce optic over from my Sig Cross, only required 0.2mil on the elevation and 0.1mil on the windage to have it zeroed at 100yds. Absolutely love it, did five quick groups and with my shitty shooting I got 0.46MOA on factory Hornady 140gr match ammo, I’m confident next time out I’ll tighten it up to 0.30MOA.

Euro Optic has been fantastic in terms of hooking me up with anything and everything I asked for. Ecstatic that they were able to get one of these in my hands so quick.

 

[Hey You]

MacieJ,
Nice rifle...but Monaco GP more better!

 

[Maciej]

MacieJ,
Nice rifle...but Monaco GP more better!

It was absolutely awesome, first time be there and really enjoyed it.

 

[Tritiumdials]

 

[BuLLet]

Did she just get dick slapped?

View attachment 7893279

 

[MTxTwelve]

Did she just get dick slapped?

Probably the face she made when she shit the bed.

 

[Heretoimproveforhunting]

Can someone please tell me the specs for replacement screws for the factory scope rail on the AT-X as well as the torque specs?

this doesnt answer your question directly, and obvious difference between pan and cap head, but these are the screws that came with my high rail kit. i was going to call them monday with a couple wuestions on these and also the original screws with the low rail.

will report back anything i learn

 

[Tritiumdials]

Accuracy International AT-X 20 MOA Action Rail Module Kit 29390BL

Accuracy International AT-X 20 MOA Action Rail Module Kit 29390BL For Sale

www.eurooptic.com

This is the correct high action rail for the AT-X.

 

[Heretoimproveforhunting]

Accuracy International AT-X 20 MOA Action Rail Module Kit 29390BL

Accuracy International AT-X 20 MOA Action Rail Module Kit 29390BL For Sale

www.eurooptic.com

This is the correct high action rail for the AT-X.

so whats this part? just got it in from EO

i believe, but may be mistaken that '90' is the high AT rail. '94' is ATX specific. they are both very close in height, but '94' is coplanar with front rail. '90' will still work is what i understand.

 

[JB.IC]

Tried searching and could not find info. thought I read in this thread what the scope rail screw specs are. Looking to get replacement ones and hoping I didn’t have to read 78 pages in this thread to find the info.

That’s proprietary information. I’ll sell you one for $200.00.

 

[Tree]

That’s proprietary information. I’ll sell you one for $200.00.

I called Mile High they took care of me. For $200 I’ll tell you what thread and length they are.

 

[blbennett1288]

You can also use the AT High action rail and AT NVG 20 MOA rail for a coplanar setup on the AT-X

 

[Tritiumdials]

so whats this part? just got it in from EO

i believe, but may be mistaken that '90' is the high AT rail. '94' is ATX specific. they are both very close in height, but '94' is coplanar with front rail. '90' will still work is what i understand.

I bet you're missing the correct screws and recoil lugs with that rail you received.

The AT version is 26612.

 

[White Mamba]

My rail came with the wrong screws and no recoil pins

 

[Heretoimproveforhunting]

My rail came with the wrong screws and no recoil pins

did you work with mile high or AI direct when you figured that out?

I know that mine didnt come with the locating pins, but it was nothing to pop the old ones out. though i have a question on the circular one as its not as tall as you would think youd want it for the tall rail

 

[White Mamba]

did you work with mile high or AI direct when you figured that out?

I know that mine didnt come with the locating pins, but it was nothing to pop the old ones out. though i have a question on the circular one as its not as tall as you would think youd want it for the tall rail

I recieved mine from Eurooptic. Reused the pins as well. Ended up figuring it out myself , you will need to buy a different length on the screws

 

[Dogmatrix]

Hey guys, will the SPUHR SP4001 0MOA 30mm mount give enough clearance for to mount the Nightforce ATACR 7-35 with a long bridge installed?

Thanks

Rob

 

[smarcus]

Hey guys, will the SPUHR SP4001 0MOA 30mm mount give enough clearance for to mount the Nightforce ATACR 7-35 with a long bridge installed?

Thanks

Rob

Pretty sure it won’t fit. You want the 4002 at 1.5 inches.

 

[smarcus]

Here is a Minox in 4002. I tried 1.35 rings and they worked but were too short for me to get comfortable behind.

 

[Maciej]

Hey guys, will the SPUHR SP4001 0MOA 30mm mount give enough clearance for to mount the Nightforce ATACR 7-35 with a long bridge installed?

Thanks

Rob

If you scroll up to my pic you'll see I'm running the ATACR 7-35 and what it sits like with the Hawkins heavy tactical one piece mount that's 1.5".

 

[Statie07]

Here is a Minox in 4002. I tried 1.35 rings and they worked but were too short for me to get comfortable behind. View attachment 7895777

Spuhr is on backwards

 

[deersniper]

Idk I’m running a 4-20x50 in a 1.5 mount with the low rail.

Also your gonna want a 34mm mount lol. Not 30mm

Pic with full rail

 

[smarcus]

Spuhr is on backwards

I’m left eye dominant. Plan on running RMR at 10:00

 

[DSPrecision]

Hey guys, will the SPUHR SP4001 0MOA 30mm mount give enough clearance for to mount the Nightforce ATACR 7-35 with a long bridge installed?

Thanks

Rob

I’m running the 7-35 in a SP-4901. 20 MOA factory base and 30 MOA 1.18” mount with no issues. The plastic ring on the front scope cap lightly hits the bridge but no issues.

 

[desert_impact]

Idk I’m running a 4-20x50 in a 1.5 mount with the low rail.

View attachment 7895799


Also your gonna want a 34mm mount lol. Not 30mm

Pic with full rail

View attachment 7895803

Is that a .308 barrel in the first image? What length?

 

[deersniper]

Is that a .308 barrel in the first image? What length?

18” 6.5cm from PVA. Button rifled. Shoots really really well

 

[TheOtherAndrew]

147gr Hornady ELDm - FV wind ~7mph last weekend
1" group at 300yd only 3 shot group cuz I was just trying to collect DOPE on a new rifle (holding no windage obviously - practice not a test)

ATX - 6.5CM

 

[4O6shootist]

Rifle is assembled, ebay bag rider, zco420 in 20moa 1.5" block mount. Ats tuner and ultra7. Weighs 20# all up as you see it. I usually run a modified jaw weld with the butt stock as centered to my inside pec clavicle junction as possible. With the ai cheek set lowest as possible, I still have to run cheek weld to get scope centered to my eye. Perhaps a swap to the AT high rail would fix? Or an even taller mount? Headed to the range here this afternoon to start barrel break in.

I purchased some red mountain arsenal ammo as it was advertised to be in lapua brass, but came in peterson lrp. Not a big deal, was loaded with 136 scenars. If they hung in the 2680-2710 fps range they shot really well. I shot a Kraft drill, 12 shots 12 positions standing, kneeling, seated, prone. I was happy with the accuracy. My 6bra match rig, usually can get it under an inch. Wind was blowing 12-18 mph at 4 o'clock, caused me to throw on the standing shots, as i mistimed my wobble. Shot well under an inch when group shooting. A few cherry picked groups we under 1/3 moa for 5 shots, but average was closer to 0.6 moa. Not bad for 35$ a box.

 

[desert_impact]

Anyone seen or thought of a .277 Fury barrel for the AT-X or rifles that share its action. Would be very interesting. I’m not sure how it would react to higher pressures, but if a sig cross can handle it, I would imagine an AI action could as well..

 

[ma smith]

...I would imagine an AI action could ..

I would maybe ask the company for an official view if/when there is a process in place to eval/cert the .mil ammo. My guess is its very early days and without a formal process may not be commerically public information yet.

 

[bodhisafa]

Any news on the chassis?

 

[Heffo]

Been 17month wait now….. good living in Australia. Getting stupid now. WTF

 

[Hennig]

Been 17month wait now….. good living in Australia. Getting stupid now. WTF

I jumped ship to an AX and ordered an AO chassis in the end.

 

[kthomas]

It’s Keyslot, not Keymod. There is a difference.

The only similarity is they both look like dick and balls running all down the sides of your chassis.

 

[desert_impact]

The only similarity is they both look like dick and balls running all down the sides of your chassis.

But it is pride month so..

 

[kthomas]

But it is pride month so..

Good point.

AI should do a special edition rainbow pattern for this month

 

[ForgeValley]

The only similarity is they both look like dick and balls running all down the sides of your chassis.

Yeah but they took it next level with the atx, because now they are erect little dicks all over your rail.

 

[mindekei]

UK rifle come with comp trigger and harder spring. Any source where to get lighter spring for comp trigger?

 

[bimbi2075]

UK rifle come with comp trigger and harder spring. Any source where to get lighter spring for comp trigger?

UK rifle come with comp trigger and harder spring. Any source where to get lighter spring for comp trigger?

Hi, I‘ve also an UK rifle, the light spring was included in the bag with the trigger manual and the Allen keys.

 

[Heffo]

I jumped ship to an AX and ordered an AO chassis in the end.

Nice , Can get the AO out here ay? Finally have hit the shores now 2-3 weeks in customs, so the wait hopefully nearly over

 

[Bucket]

Nice , Can get the AO out here ay? Finally have hit the shores now 2-3 weeks in customs, so the wait hopefully nearly over

So we should be putting in our PTA's???? Or wait 'til they get to our LGS??.............................
Thinking I'm gonna wait.

 

[Heffo]

So we should be putting in our PTA's???? Or wait 'til they get to our LGS??.............................
Thinking I'm gonna wait.

Danny said put it in mate. He’s very confident only 2-3 weeks. They are here now in Australia. I have one that runs out 28 July . They are quick atm anyway…..week or two!

 

[xxflyingturtlexx]

Had a lead on one but can’t find one anywhere