Accuracy International AT-X

[Homelander]

Ha! Look at this guy... He doesn't have an AXSR stock!

View attachment 8302317


I already had the AXSR stock available from a chassis so I figured why not and swapped it. It doesn't do anything really better other than adjust without tools and look cool.

Hahaha, mine is toolless as well. Yours was one of the ones I remembered seeing, love the the cerakote. I was just going a bit insane trying to figure out a hinge solution. Just trying to determine if the AXSR one would work with the ATX stock and chassis.

 

[marc.south1972]

Adjustable Bag Rider - Adjustable Bag Riders

www.adjustablebagrider.com

 

[RUN8]

New glass installed.

 

[Rio Precision Gunworks]

Hey all, I've seen a few folks swap over to AXSR stocks on ATX rifles and was curious why? Folding hinge? I was seeing it was possible to make a AXSR hinge work on these and still retain the ATX stock. Loving mine so far. TIA

The earlier versions required tools to adjust LOP and cheek. Combined that with folders were not available for quite a while.

 

[deadly0311]

AT-X in Sniper Green, this rifle is one that won’t leave

 

[CageFighter]

I would either cut in between the 3rd and 4th slot from the front at a 90 or from the top of the top cover at an angle that intersects the 4th slot, the screw hole then back to 90 to the bottom or continue the angle.

or this one, didn't save, dang it-just follow the red line to the top, should line up with forward edge of the top cover

impatiently waiting on this chop. would open major possibilities for me if I like the look afterwards.
I would just need to find a machine shop that would be able to do the work.

 

[NoLegs24]

$3,850. Better buy now, price is going to jump up a pretty penny once these are gone.

Accuracy International AT-X 6mm Creedmoor 26" 1:8" 5/8"-24 Threaded Bbl Fixed Stock Red Rifle 29824R2-FI-60C-26

Accuracy International AT-X 6mm Creedmoor 26" 1:8" 5/8"-24 Threaded Bbl Fixed Stock Red Rifle 29824R2-FI-60C-26 For Sale

www.eurooptic.com

 

[RUN8]

Damn that’s a good price.

 

[ColdCanadian]

$3,850. Better buy now, price is going to jump up a pretty penny once these are gone.

Accuracy International AT-X 6mm Creedmoor 26" 1:8" 5/8"-24 Threaded Bbl Fixed Stock Red Rifle 29824R2-FI-60C-26

Accuracy International AT-X 6mm Creedmoor 26" 1:8" 5/8"-24 Threaded Bbl Fixed Stock Red Rifle 29824R2-FI-60C-26 For Sale

www.eurooptic.com

Just ordered one last weekend. No taxes as well so it’s $3865 shipped

 

[CageFighter]

anyone hear of any updates to the AT-X? did the CBP contract have anything to do with it??

 

[Safety_3rd]

Just ordered one last weekend. No taxes as well so it’s $3865 shipped

Shit I ordered one on the 6th… paid 3999 and 320 for tax and 27 for shipping and I have a law enforcement account Not to be a bitch but anyone know if euro with give me a store credit/refund?

 

[3rdfocal]

AT-X in Sniper Green, this rifle is one that won’t leave

Sick.

 

[hairy_pineapple588]

anyone hear of any updates to the AT-X? did the CBP contract have anything to do with it??

From what I’ve read. The gen iv will come with nv bridge and folder from the factory and price will increase.

 

[CageFighter]

From what I’ve read. The gen iv will come with nv bridge and folder from the factory and price will increase.

any links???

 

[hairy_pineapple588]

any links???

It was someone in this thread. They spoke with Euro optic.

 

[Hondo1]

Hey guys I have fallen behind on my AI trivia and don't have time to read all 112 pages of this thread. Could you please summarize the difference in the AT-X generations for me?

 

[hafejd30]

Hey guys I have fallen behind on my AI trivia and don't have time to read all 112 pages of this thread. Could you please summarize the difference in the AT-X generations for me?

1 and 2 have Allen screws for adjustments on the cheek riser and LOP. Gen 3 has thumb wheels

That’s the biggest I can think of

Supposedly Gen 4 adds the folder and forend bridge to the same package. Not out yet but that’s the rumor

 

[TylerN]

And I think between 1 and 2 they changed the screws that attach the bottom and top half of the chassis to make assembly and disassembly easier.

 

[eamars]

I made a 3d printable thumb rest and bag rider for AT-X for anyone who have interest.

The original CAD is also supplied from https://github.com/eamars/accuracy_international_atx_printable_parts

 

[hafejd30]

 

[JGunns]

Just got my AT-X and immediately rattle canned it gray. Suuuuper pumped about this thing. I must have browsed this entire thread before being completely unable to stop myself from making the poor financial choice

 

[TylerN]

View attachment 8309871
Just got my AT-X and immediately rattle canned it gray. Suuuuper pumped about this thing. I must have browsed this entire thread before being completely unable to stop myself from making the poor financial choice

With the current ATX price that's a wise investment

 

[Overclok79]

Upgraded my old action to a TL3. I’ll be going back and forth between 6 dasher for PRS and 6.5 PRC for some ELR work.

 

[TylerN]

Shooting the AT-X today.

 

[Homelander]

A little impromptu winter match, first go on it with actual stages, pushing 142smks at almost 2800. No recoil, just need a hinge and top cover yet

 

[6point5CM]

Got my .223 bolt, mags, and barrel back! Stoked to run some .223 through this thing!

 

[xxflyingturtlexx]

Got my .223 bolt, mags, and barrel back! Stoked to run some .223 through this thing!

Where did you get the bolt and what barrel ?

 

[6point5CM]

Where did you get the bolt and what barrel ?

I got a factory bolt from Euro after trying for like a year! They got a few in a couple months ago. Bugholes does the conversion. I just grabbed a Bartlein MTU they had on the shelf for the barrel. Should handle factory stuff well but mainly for my 77-80 class bullets I’ll load up for it with a longer COAL.

 

[jb1000br]

I got one from Euro after trying for like a year! They got a few in a couple months ago. Bugholes does the conversion. I just grabbed a Bartlein MTU they had on the shelf for the barrel. Should handle factory stuff well but mainly for my 77-80 class bullets I’ll load up for it with a longer COAL.

To be clear...you got a factory bolt from us and then had it modified - Just didn't want anyone thinking we were hiding 223 bolts somewhere

 

[6point5CM]

To be clear...you got a factory bolt from us and then had it modified - Just didn't want anyone thinking we were hiding 223 bolts somewhere

Correct! I updated my post to make that more clear! Now I just need one more to open up to mag bolt face and I’ll be set!

 

[hafejd30]

To be clear...you got a factory bolt from us and then had it modified - Just didn't want anyone thinking we were hiding 223 bolts somewhere

I was just about to jump on the site to find the .223 bolt to haha

How often you see the 260 barrels come in stock? Plan to order one this winter. Just curious if you see them every couple weeks, months, years? The black 26” 2018 profile

 

[4O6shootist]

I was just about to jump on the site to find the .223 bolt to haha

How often you see the 260 barrels come in stock? Plan to order one this winter. Just curious if you see them every couple weeks, months, years? The black 26” 2018 profile

Just have a good smith like Manzella or Black Canyon cut you one, would be same price(or cheaper) and you'd have it a lot sooner I bet. Manzella will cut the wrench flats in it and everything. He did cut barrels at AI for a handful of years. Ace would likely make you the custom contour and have it available in 12 weeks.

 

[hafejd30]

Just have a good smith like Manzella or Black Canyon cut you one, would be same price(or cheaper) and you'd have it a lot sooner I bet. Manzella will cut the wrench flats in it and everything. He did cut barrels at AI for a handful of years. Ace would likely make you the custom contour and have it available in 12 weeks.

Thanks for the info! That was my other thought as well

 

[ColdCanadian]

AT-X hinge assemblies in stock at Bison Tactical right now

 

[BurtG]

Supposed to go to this

Put my OG 65cm barrel on. Squeaks hy by the skin of its teeth on weight

19.6 lb

18.2 without mag or bipod.

16.5 without mag bipod or silencer

 

[Homelander]

Bridge and folder came in today

 

[xxflyingturtlexx]

Bridge and folder came in today
View attachment 8320086

Looks good where did you get the foldy?

 

[Homelander]

Looks good where did you get the foldy?

Bison tactical restocked them last week. I couldn't believe it. I never filled out a checkout faster in my life.

 

[Infidel4life11]

Scored an AI 6.5cm barrel and NF Megamount. Will be headed to gunsmith soon for the chassis chop.

 

[4O6shootist]

Scored an AI 6.5cm barrel and NF Megamount. Will be headed to gunsmith soon for the chassis chop.
View attachment 8320228
View attachment 8320229

I like the chop idea! A short forend version was supposed to be available eventually. You're def the first guy I've saw put a $400 scope on a $4k rifle!

 

[Infidel4life11]

I like the chop idea! A short forend version was supposed to be available eventually. You're def the first guy I've saw put a $400 scope on a $4k rifle!

Probably less than $300 . It’ll live on the gun forever and bring a smile to my face every time someone has a meltdown about it about it.

 

[DocRDS]

OK I'm gonna be a downer.

I got burned on the AT-X.

(1): The price drop. Given current inflation, that was a nice kick in the nuts to first run customers. Also killed resale
(2): 1st gen--no quick adjust, multiple screws to manipulate. At this price point that is just inexcusable.
(3): Post product support. Getting a hinge has been nigh impossible. I don't have the time of day to play around waiting for in stock notices and be there within 5 minutes.
(4) I can't mount a **** Sling without a $80 rail accessory.
(5) Keyslot. I know AI had theirs first. But Key mod is 1/4 the price and 90% wider adopted. And available.

Yes it is a nice rifle, it shoots, but I can't work with it. I can't hunt with it (needs sling attachments). I can't upgrade it (hinge out of stock) without spending way too much time.

I'm out.

And it'll probably be a cold day in hell before we get magnum/valk/223 bolts if ever.

I shoulda learned my lesson on a computer game pre-order back in the day. This one was much more expensive. For all the hype, my $1000 Howa does the same thing and I can take that hunting without an upgrade, and get parts. I would have to buy an ARCA rail, but that still leaves me several grand in the black.

Make no mistake, its a nice rifle--but AI got my money and I got suckered. No way this is worth the price and effort I paid.

 

[eamars]

Does the AX or AT hinge work with AT-X?

 

[4O6shootist]

Does the AX or AT hinge work with AT-X?

Negative

 

[JohnDeereGuy1996]

I may be biased but I love mine. The recoil impulse is the real seller to me.

 

[hafejd30]

OK I'm gonna be a downer.

I got burned on the AT-X.

(1): The price drop. Given current inflation, that was a nice kick in the nuts to first run customers. Also killed resale
(2): 1st gen--no quick adjust, multiple screws to manipulate. At this price point that is just inexcusable.
(3): Post product support. Getting a hinge has been nigh impossible. I don't have the time of day to play around waiting for in stock notices and be there within 5 minutes.
(4) I can't mount a **** Sling without a $80 rail accessory.
(5) Keyslot. I know AI had theirs first. But Key mod is 1/4 the price and 90% wider adopted. And available.

Yes it is a nice rifle, it shoots, but I can't work with it. I can't hunt with it (needs sling attachments). I can't upgrade it (hinge out of stock) without spending way too much time.

I'm out.

And it'll probably be a cold day in hell before we get magnum/valk/223 bolts if ever.

I shoulda learned my lesson on a computer game pre-order back in the day. This one was much more expensive. For all the hype, my $1000 Howa does the same thing and I can take that hunting without an upgrade, and get parts. I would have to buy an ARCA rail, but that still leaves me several grand in the black.

Make no mistake, it’s a nice rifle--but AI got my money and I got suckered. No way this is worth the price and effort I paid.

AI rifles are very good $ on the second hand used market. So that’s where I suggest people buy them

With the recent increase on new stock it gets harder for a person to justify buying new. It was already a bit out of hand prior to that with the current market for precision rifles

 

[hairy_pineapple588]

I got burned on the AT-X.

(1): The price drop. Given current inflation, that was a nice kick in the nuts to first run customers. Also killed resale
(2): 1st gen--no quick adjust, multiple screws to manipulate. At this price point that is just inexcusable.
(3): Post product support. Getting a hinge has been nigh impossible. I don't have the time of day to play around waiting for in stock notices and be there within 5 minutes.
(4) I can't mount a **** Sling without a $80 rail accessory.
(5) Keyslot. I know AI had theirs first. But Key mod is 1/4 the price and 90% wider adopted. And available.

Yes it is a nice rifle, it shoots, but I can't work with it. I can't hunt with it (needs sling attachments). I can't upgrade it (hinge out of stock) without spending way too much time.

I'm out.

And it'll probably be a cold day in hell before we get magnum/valk/223 bolts if ever.

I shoulda learned my lesson on a computer game pre-order back in the day. This one was much more expensive. For all the hype, my $1000 Howa does the same thing and I can take that hunting without an upgrade, and get parts. I would have to buy an ARCA rail, but that still leaves me several grand in the black.

Make no mistake, its a nice rifle--but AI got my money and I got suckered. No way this is worth the price and effort I paid.

I bought a Atx at the discounted price and started looking for accessories. I canceled the order and went with a Termnius Zeus. The cons you mentioned above were a deciding factor.

 

[DocRDS]

AI rifles are very good $ on the second hand used market. So that’s where I suggest people buy them

With the recent increase on new stock it gets harder for a person to justify buying new. It was already a bit out of hand prior to that with the current market for precision rifles

Agree---that's why I am so pissed with the price drop. Resale if decided was one of the major positives.

The unsaid thing is I had just started to trust some of the talking heads about products once again.
Not now, I know I am well off, but when I get screwed in a deal--it makes me reflect on how I arrived there.
Usually I try and Listen to guys like Frank and Jacob and they were talking this up a storm.
The whole thing is a very bad taste and I feel like I'm just another cash cow and the in crowd gets to laugh up a storm.
I don't trust anyone's recommendations on this sight anymore (and for all my cursing, that is the worst insult I can think of)

I should have known: caveat emptor

I couldn't even find the specs for keyslot to make my own screws. Hell with my luck they'd sue me for patent infringement.

 

[jbuck88]

When the gen1 and gen 2 were released I thought they said they were working on the adjustable version (gen3). Thats the main reason I waited to order mine. I shoot with my kids a lot. So I need the quick adjustment.

As for the hinge just put one on backorder and sit around and wait. I have no idea how long mine will take to get in, but some day.

However my AT-X is starting to grow on me, now that I got my 6br feeding right.

 

[xxflyingturtlexx]

OK I'm gonna be a downer.

I got burned on the AT-X.

(1): The price drop. Given current inflation, that was a nice kick in the nuts to first run customers. Also killed resale
(2): 1st gen--no quick adjust, multiple screws to manipulate. At this price point that is just inexcusable.
(3): Post product support. Getting a hinge has been nigh impossible. I don't have the time of day to play around waiting for in stock notices and be there within 5 minutes.
(4) I can't mount a **** Sling without a $80 rail accessory.
(5) Keyslot. I know AI had theirs first. But Key mod is 1/4 the price and 90% wider adopted. And available.

Yes it is a nice rifle, it shoots, but I can't work with it. I can't hunt with it (needs sling attachments). I can't upgrade it (hinge out of stock) without spending way too much time.

I'm out.

And it'll probably be a cold day in hell before we get magnum/valk/223 bolts if ever.

I shoulda learned my lesson on a computer game pre-order back in the day. This one was much more expensive. For all the hype, my $1000 Howa does the same thing and I can take that hunting without an upgrade, and get parts. I would have to buy an ARCA rail, but that still leaves me several grand in the black.

Make no mistake, its a nice rifle--but AI got my money and I got suckered. No way this is worth the price and effort I paid.

Lol