So I don’t buy it myself, there’s a folder ai at with standard and comp triggers in 6.5 Creedmoor on LRH forum for 2500 shipped. I’m kicking myself for offering it up, but I can’t swing it with having to buy a new car
Nik and the guys are good to go. I’ve dealt with them before for barrels. He’s one of the guys in that shop. I’d trust them again
Well thanks for the heads up. I’m plus one AT now. Much appreciated!
@MysizeisMAGNUM @trophyhunter @NoLegs24
Following up on the 6BR discussion. I ran some factory Lapua 6BR through the Win Tac 6BR barrel with .124” free-bore. Rounds 30-35 on the barrel group below. I am hoping it’ll speed up a bit after 50-100 rounds. Still waiting on McCourts Test Series and 300 rounds.
2755fps, SD 10-11fps, ES 30-35fps
A couple notes about the 6BR in AI:
1.) Zero issues feeding during live (35rds) or dry chambering (50rds)
2.) 100% ejection rate during live fire
3.) ~50% ejection rate during dry chambering. The bullet and casing stuck in barrel, have to turn rifle upright and hit on butt. This concerned me at first but with 100% ejection rate during live fire these fears were quenched
4.) run the bolt normally. Playing with spent casings and slower bolt cycling rates may cause the fat 6BR case to not eject from the port. No issues when running normally
Following up on the 6BR discussion. I ran some factory Lapua 6BR through the Win Tac 6BR barrel with .124” free-bore. Rounds 30-35 on the barrel group below. I am hoping it’ll speed up a bit after 50-100 rounds. Still waiting on McCourts Test Series and 300 rounds.
2755fps, SD 10-11fps, ES 30-35fps
A couple notes about the 6BR in AI:
1.) Zero issues feeding during live (35rds) or dry chambering (50rds)
2.) 100% ejection rate during live fire
3.) ~50% ejection rate during dry chambering. The bullet and casing stuck in barrel, have to turn rifle upright and hit on butt. This concerned me at first but with 100% ejection rate during live fire these fears were quenched
4.) run the bolt normally. Playing with spent casings and slower bolt cycling rates may cause the fat 6BR case to not eject from the port. No issues when running normally
Last edited:
Measure your shoulders before firing and after firing, if the cases are a tad short it could create an issues with non fired extraction cause extractor can’t grasp the entire rim.
could either be short brass or a tad deeper chamber, neither an issue but something to check.
Last edited:
I've been in contact with AI and their store is not up yet but they send some stickers. They also said they will have hats and other swag when they reopen. 
I've been in contact with AI and their store is not up yet but they send some stickers. They also said they will have hats and other swag when they reopen.
That's what I want need to get an AI sticker on my sticker wall.
What’s the going price for a pre 2014 AXMC(long action)? I’m thinking I might want to start looking for one in a few months and just curious what a fair price for one would be since the price of post ‘14’s have softened a bit lately.
Not sure if I’m on the same page as you, but there is no pre-14 “AXMC”, I’m pretty sure that’s the AX338. Non-skeleton buttstock, no quick change barrel, and no multi-caliber ability. I think I’ve seen those in 338 Lapua selling used for $4750-ish.
Unless you’re talking about the original PSR rifle, which is a totally different animal.
Ya AX338 is the term I shoulda used. Thanks for the correction.
Mile High has one on Gunbroker for $5k, comes with 338LM and 300NM Barrels..
Still haven’t gotten tired of my shorty AT. I might put the S&B back on it though so the Hensoldt is available for a hunting rifle build.
Last edited:
I posted in the PX a WTB with no success. Anyone here have a set of Green AIAT skins for a folder they want to sell? I could order from Mile High but they said it may be a wait. You can PM me direct if you have some. Here is a picture of the current set so I am not totally hijacking the threading, apologies.
Attachments
Out in the hills yesterday chasing steel with the 308 barrel.
Keeping the pool safe....
Last edited:
Bryan is working on having more made, and they will likely be sold through Hat Creek Training. Everytime I post up pics with those plates, we get a ton of requests, and I relayed that to the original manufacturer who made them for Bryan and Altus. When they come available, I'll try to remember to get on here and post them up for you all to get at.
Since this seems to be the place to post up AI pics...
Got out the other day to stretch the legs on the Atips. Love everything about this wonder-rifle.
Theres a possibility in coming years I do a 6BR variant (thinking 6BRA). My grand idea is to fireform in the spring shooting prairie dogs then 6bra in the summer matches. Seems like some have issues feeding others don't?
need to report this to the mods. I hear pornography is not allowed on this forum.
Time for some more AT posts. This post
has been getting a bit quiet this week.
I need to get a thumbhole at in green in my ai collection one day....sigh
Unfortunaltey due to our state laws, we can't hunt coyote at night with NV or thermal. So I'm using a Coyote Reaper XXL spotlight.
Lol that should tell you something. Way better scopes for the money
Looking forward to finally getting the AW broke in this weekend
I see lots of razors on here. Obviously, the ATACR is the preferred optic for the AI crowd.
TT is the preferred optic for AI owners with quick change barrels.
At least it should be... Zeroing the TT turrets is down right AMAZING.
At least it should be... Zeroing the TT turrets is down right AMAZING.
I just threw up in my mouth.
Those MTC turrets are exceptional and the two screw zeroing System was a breeze with them as well. I’ve owned a couple, even had one on my AT, but the T3 part I’ll give those reticles a hard pass.
Met pretty cool dude at MHSA yesterday. He was nice enough to sign something for me.
AI support came through and I just received these today. Definitely going on my case.
My pack usually has a few Busch Lights in it, it’s annoying trying to calculate offsets, especially after a Busch Latte.
The TT zeroing is so easy it’s almost the same sequence you currently use except you get (slow guy like me get) hard zero turrets.
