-
Having trouble using the site?
Contact support
Pre fit AI 26” 10 twist
Using .308 small rifle primer cases
cci 450 small magnum primers
Is this Racine rifle range in WI?View attachment 8101393
View attachment 8101405
My 6BR AT. this is my first rifle to ever achieved 1/4 MOA 5 shot group at 100 yards. I ve been enjoy shooting the small rocks at 550 yards berm and see them launching into the air lol. She likes 105 berger hybrid with 30.6 gr Varget.
Awesome! I’m a Milwaukee native, and been a member at RCLRC for like 7 or 8 years. Are you planning on shooting any of the WPRC club matches in the area?
For anyone interested in doing up a shorter length of pull ATX for a younger shooter I found out a gen1.5 is about a 1/2” shorter than a gen3 and if you pull the adjustable buttstock unit out and drill/tap one extra hole and re-attach the buttpad you can reduce the length of pull a total of 1.5”.
I found a donor gen1.5 buttstock and drilled/tapped an extra hole (circled in red). Fully extended it’s about an inch shorter LOP than I usually run.
I found a donor gen1.5 buttstock and drilled/tapped an extra hole (circled in red). Fully extended it’s about an inch shorter LOP than I usually run.
Attachments
Swapped the k525i for a Gen3 Razor just for the lads in here that hate em 
Not to worry, we hated the Kahles too.
For a sec I thought you were rocking a 1970s headband à la The Royal Tenenbaums.
It thought this as well and was actually a little disappointed when I realized it wasn’t.
Me too! Damnit that would've be so Chad. Or so based. Or something.
Beat 8 other Tac shooters last weekend at MKM.
Also F the wind and F the snow. I've had enough of this winter BS.
Winter's coming... Just sayin'.
AT for the win!
Mind blown. Can you tell us how you won a comp without a lower bore axis, barricade stop & arca rail???
All you do is shoot as mediocre as you always do, and let everyone else suck more.AT for the win!
Mind blown. Can you tell us how you won a comp without a lower bore axis, barricade stop & arca rail???
Follow me for more pro tips.
That a standard AI Barrel? What MV you getting out of them?
I'm using 178gr Hornady BTHP at the moment. Was going to drop too 175gr SMKs but might drop to 168s instead.
Bartlein 1/10 twist. My load is 45.2g of Shooters World Precision and its at 2710fps at 60°F. Runs around 2677 at 30°F which it definitely was last weekend.
Could you ring that steel water tank in the distance.First day out with the AXSR, thanks @MOUNTIC , the doggo approves
View attachment 8099349View attachment 8099352
View attachment 8099355View attachment 8099356
It's a mile away so probably, but then I'm not sure I'd be welcomed back after that.
Ah nice. I'm running AI Barrel with Factory Ammo so getting nothing like those MVs
2588fps with the 178gr ELDM BTHPs at 0c
I've put about 500 rds. through it now. It's a tack driver for sure. Not currently reloading so I did some load development with Copper Creek and we came up with a couple loads it really likes based on the 130 gr. Berger Hybrid.
Decided to do an inventory because I reached into my ammo stash and pulled out a 20" 338LM barrel that I completely forgot I even had.
Apparently I have a pattern when buying barrels: A shorty and a long boi.
Two by two, hands of blue...
26" 308
16" 308
26" 300WM
20" 300WM
27" 338LM
20" 338LM
26" 6.5CM
24" 6.5CM (which I bought because the lead time on the 26" barrel was supposed to be 5 weeks and 4 months later I hadn't gotten it)
and now I know I need more SR brakes
Typical AI guys, like my buddy says... we AI dudes got barrels bolts suppressors for each day of the week for our rifle .
New Proof Carbon 20" 300wm barrel arrived from Front Range Precision, Deadair Nomad L Raw is about to get a rude awakening.
What possessed you in doing such act ?I sold my off too , but I kept atleast one .Makes me wish I never got rid of my HSRC
Sent my AAC to ECCO a few weeks ago and just got it back. Now I can be civilized and stop being shamed by @Huskydriver
So glad I went with the SF system.
Nice setup and hits at that range!
How big was the target? And how was the wind?
Regards
My crappy range, first day out in a while... busy, busy.....
Nice spring day, about 60 degrees, windy though. Warmed up the rifle on the tripod, then first group on paper from the bench. Wish I could shoot like this from the tripod too!
308, 168 SMK
Nice spring day, about 60 degrees, windy though. Warmed up the rifle on the tripod, then first group on paper from the bench. Wish I could shoot like this from the tripod too!
308, 168 SMK
How many of those barrels do you actually use?
And how do you handle the different scope zeros for each one?
Depends on the goal of the moment. But I have shot them all except the 20" 338 which, like I said, I kind of forgot that I had. I was going to fix that this weekend but I had some family stuff come up and couldn't shoot it.
As far as different zeros, I did take a day in January and swap through several of them to record the offsets. Each of my barrels has its' own dope book and the zero is recorded there. Elevation is relative to where the scope bottoms out, eg "73 clicks from bottom" etc. Windage is similar but you gotta be careful not to jack up the internals.
Once I get the rest of my data together I'll have a better system but for now I just picked the 26" 308 as my zero barrel and everything else gets offsets put in to the kestrel profiles. By the way, the difference in elevation between the 308 and the 338 is 2.7mils, which was surprising.
The ol gaytx held its own finally. Pro tip. Make sure your kestrel does not have a 50mph head wind in it. It’ll give you dope that is a way off.
Also: tremor 3 >>>>>>>>>>>> msr2 @Huskydriver
Also: tremor 3 >>>>>>>>>>>> msr2 @Huskydriver
Last edited:
Thank You!
24x24 target wind was Left to right 8mph. Im excited i have 30 inch barrel coming. This ia factory one only 27”.
Thank You
Range is great. Will be testing 33xc hopefully soon at 3400 yards there.
Couldn't find the Vision thread, thought this would be close enough. Vision chassis, Impact action, 20" Straight Jacket Armory barrel, Bix'n'Andy Tacsport Pro trigger, ZCO 5-27, and waiting for the Area 419 brake...
I think this is what you’re looking for
Precision Rifles.....show em!!
I like the purple fade to blue, what's your ride look like? :) MPA 6GT
www.snipershide.com
Similar threads
