Accuracy International Picture Thread

[MOUNTIC]

Yeah, just a side shot without the NV would work. Just seeing how high they look with that low rail. I like high rings (1.5” to 1.4”) but looks factor into it a bit more than usual as, well, it’s an AI.

Heres a High action rail with 1.5" height spuhr.

 

[Huskydriver]

Ok, two question:

The first is a pretty obvious question, but wanted to confirm.

AT wanting to run a clip-on needs:

1. AT Night Vision Bracket
2. 20 MOA Night Vision Rail for the AT NV Bracket
3. High AI pic rail for scope
4. And here is the question: 1.5” rings, right?

I assume 1.5” because that’s what other rifles need for NV/thermals, but just wanted to check.

Second Q:
Anyone have pics of a 1.5” scope mount on an AT/AE/AW on the low rail? Preferably a Spuhr 4002, but I’ll take whatever.

I’m asking that b/c I’m not sure if I’d go with a clip-on or just a thermal scope. If I go the latter I just want a visual of how high the scope looks.

1.35 to 1.5 if you want to be on the plane

 

[Huskydriver]

Heres a High action rail with 1.5" height spuhr.

You still got that at ?

 

[joetuono]

You still got that at ?

1.5 with low rail.

 

[Huskydriver]

1.5 with low rail.

You won't be on the Nvg same plane.....

 

[BurtG]

You won't be on the Nvg same plane.....

What’s the difference between that and the high rail. If using a superior 1.3 centerline clip on ?

 

[carbonbased]

1.5 with low rail.

Kick ass! That’s a perfect pic. That height on a low rail looks good.

You won't be on the Nvg same plane.....

I know, but if I go that way I’ll just attach the high rail and NV mount.

 

[stanley_white]

My green AT in 308 with a 24” barrel arrived today.

All I can say is, “Now I get it.”

-Stan

 

[taliv]

My green AT in 308 with a 24” barrel arrived today.

All I can say is, “Now I get it.”

-Stan

Did you do the chest high drop test yet? You can’t say you get it til you’ve done the chest high drop test.

 

[Bacarrat]

Did you struggle to cycle the bolt like all the PRSers like to complain about?

 

[phungn]

Finally got permission from the atf to take home my supressor

 

[stanley_white]

Did you struggle to cycle the bolt like all the PRSers like to complain about?

Since the AT was built as a sniper weapon system, and not a PRS rifle, I judged it on its own merits.

-Stan

 

[stanley_white]

Did you do the chest high drop test yet? You can’t say you get it til you’ve done the chest high drop test.

Not on my to do list.

I'll believe everyone else.



-Stan

 

[Doctorwho1138]

This is the AT with a Spuhr 4002C with high action rail. This is what Eurooptoc told me what I need for be planar with NV clip on. The 20 Moa rail is still on back order.

 

[WillHugh]

This is the AT with a Spuhr 4002C with high action rail. This is what Eurooptoc told me what I need for be planar with NV clip on. The 20 Moa rail is still on back order. View attachment 8343816

Mile High had the 20 moa front rail in stock as of yesterday (I ordered one).

 

[samb300]

Finally got permission from the atf to take home my supressor

Holy crap, another LH AI in the wild, in an aftermarket chassis to boot

 

[phungn]

Holy crap, another LH AI in the wild, in an aftermarket chassis to boot

Yeah the chassis is fantastic. Perfectly happy with this and the thumbhole over an atx. Kudos to the guy who came up with it

 

[Huskydriver]

What’s the difference between that and the high rail. If using a superior 1.3 centerline clip on ?

Nothing except that is the exception and not the norm... Just giving general advice on why they run a high rail and it's designed for a 1.5-1.35" scope mount to be on plane with what were the std night vision specs at the time.... You do you boo

 

[samb300]

Yeah the chassis is fantastic. Perfectly happy with this and the thumbhole over an atx. Kudos to the guy who came up with it

 

[taliv]

Mile High just sent me an email "Upgrade to precision" when I already have an AXSR.
I'm calling for congressional hearings. We need an Inquisition!
Somebody needs to be sent to the reeducation camp.

 

[kft101]

First time out with the OG green-on-green-on-green AIAW (for me anyway). Not bad for a nearly 30 year old rifle with a fixed 6X scope! @AndyK

 

[brianf]

First time out with the OG green-on-green-on-green AIAW (for me anyway). Not bad for a nearly 30 year old rifle with a fixed 6X scope! @AndyK

View attachment 8344688View attachment 8344689View attachment 8344700

Back when AI’s were true to their roots

Square
Green
Bonded
!!!!

 

[WEBSTER113]

Back when AI’s were true to their roots

Square
Green
Bonded
!!!!

Preach!!!

 

[BurtG]

^ like my awm


On a modern note.

Hit me up if ya need a 6br barrel


Also

#boltliftsoheavyyouneed4weightstoholdit

 

[TheBigCountry]

^ like my awm


On a modern note.

View attachment 8344727

Hit me up if ya need a 6br barrel


Also

View attachment 8344729View attachment 8344731

#boltliftsoheavyyouneed4weightstoholdit

You bought another ATx???

 

[BurtG]

Only 3 serial numbers younger than my other one

And

 

[ForgeValley]

And

View attachment 8344755

It had to be.

 

[WillHugh]

Meh just swap the bolt head hit up mh no need to rework that

Turns out AI won't swap a bolt head, they want to just replace the whole bolt body (for $800 +). Looks like I also have a large firing pin despite the ad saying it was sfp.

I'm not overly upset given how little I paid for the rifle, but at this point I'm thinking I'll just have LRI clean up and bush the bolt, even if it won't be pretty.

 

[brianf]

Turns out AI won't swap a bolt head, they want to just replace the whole bolt body (for $800 +). Looks like I also have a large firing pin despite the ad saying it was sfp.

I'm not overly upset given how little I paid for the rifle, but at this point I'm thinking I'll just have LRI clean up and bush the bolt, even if it won't be pretty.

Not sure what thread but a member asked about LRI about making bolts.

I said I’d buy one if every size asap.

My alerts on things I follow on the hide don’t always come through so there might be something going on.

If you find it..tag me in

 

[Rio Precision Gunworks]

 

[xxflyingturtlexx]

View attachment 8345455

Niceeee

 

[vh20]

View attachment 8345455

What can is on the AXSR? Looks like a 338 Ultra SR, but for some reason looks longer…

 

[Huskydriver]

What can is on the AXSR? Looks like a 338 Ultra SR, but for some reason looks longer…

Just the angle

 

[carbonbased]

Just the angle

It’s the optical inch…must’ve manscaped…

 

[brianf]

Safe queen guys are having a stroke that the rifles are leaned against a rusty barrel lol

 

[austino775]

AW at the club match today.

 

[Huskydriver]

AW at the club match today.
View attachment 8346012View attachment 8346013

With Schmidt's as it was intended

 

[Cuban Croc]

AW at the club match today.
View attachment 8346012View attachment 8346013

Nice rig. I know the owner. What’s up Austin?

-Al

 

[austino775]

Nice rig. I know the owner. What’s up Austin?

-Al

There he is! Thanks for letting me play with the AW!

 

[stanley_white]

AW at the club match today.
View attachment 8346012View attachment 8346013

Which reticle on the S&B?

-Stan

 

[Cuban Croc]

Which reticle on the S&B?

-Stan

P4LF

 

[Rio Precision Gunworks]

Proofing out positions and targets for a class this weekend.

 

[stanley_white]

P4LF

Thank you!

-Stan

 

[BurtG]

What do your AIs weigh set up for PRS ?

This one I found cheap with internal and externals weights , weighs substantially more than what I’ve been using

 

[TylerN]

What do your AIs weigh set up for PRS ?

This one I found cheap with internal and externals weights , weighs substantially more than what I’ve been using

View attachment 8346491

My internal and external weights sit in a parts bin these days. I didn't need them for balance and I don't notice any practical difference in recoil when shooting if the rifle weighs 1 or 2 pounds more. I did notice the 1 or 2 pounds when carrying or moving the rifle. light weight plastic wings like those 3D printed ones you have are probably a better attachment than weights for PRS stuff.

 

[Huskydriver]

What do your AIs weigh set up for PRS ?

This one I found cheap with internal and externals weights , weighs substantially more than what I’ve been using

View attachment 8346491

That a harris or a Caldwell bipod?

 

[Rio Precision Gunworks]

I think the one I posted above is about 21lbs. Will toss on scale this week.

 

[Bravo6niner]

23#
ZCO527, spuhr, Ckye, 26” HV, maverick, and two sawtooth long aluminum weights. I put the aluminum weights on for bag stability and it matches the feel and balance of my Terminous Zeus in an ATX chassis. On the Zeus setup I run a long and short steel sawtooth weight to get it up to 23#.

Both guns are identical, minus the action and the use of steel or aluminum weights

 

[M8541Reaper]

Match yesterday in the one true caliber. Weirdest part of my trip was how my key didn’t work when I got home.
#MidPacTacLyfe
#DisapointingMyWaifu175GrainsAtATime
#EliteColorDeception

 

[Silvan]

AWSM in 300 Win Mag
The Berger factory ammo 215 hybrid has phenomenal accuracy.