Another Picture Thread - All Other Semi-Autos

[DPS03]

I'm whoring for a 6.5CM Auto - how's that Aero Precision shooting? I'm thinking about building one and want 24" barrel but Seekins Precision is not offering and 24" complete uppers.

VooDoo

Mine shoots very well.

At the end of sighting it in, the last 8 rounds were in a 1.125" spread. I didn't have the gun rested well firing off a bipod and free holding the other end so I feel certain most of this variance was me simply pulling off.

I'm beginning to believe in the BSF carbon sleeved barrel I bought. That, and the scope.

 

[MSTN]

SG 551-2 SWAT, 7 3/4 pound, full auto, 14.3" example of why no one should ever mess with the Swiss.

I've been waiting for another one of these for 25 years.

 

[Guthwine]

Had a blast today engaging targets from 30 to 300m. (with the 3x Donut-Crosshair)

Corvus Case Deflector is a very handy addon.

 

[Brian300]

My Predator setup.
AR10 in .243
Xcaliber barrel
Aero upper, lower and rail
Fail zero bolt
Geisslel trigger
Silencerco can
Vortex 1-8

 

[TheHorta]

I’ve been on the hunt for many years now for a single rifle that will truly “Do it all.” Bedside CQB/Home defense, long range shooting, night ‘yote/pig hunting, Tule Elk hunting — everything!

I didn’t think it possible, but it’s finally here!!!

Here are just two of the many quick-switch mission adaptable loadouts you can use on this extremely versatile platform.

First-up (first 2 faux toes) is configured for bedside Home Defense / CQB. It’s practically hearing-safe when used unsuppressed indoors and zero worries about overpenetration:

The .50 BMG round is virtually indistinguishable physically from your standard 5.56/.223 round, but packs 11% more muzzle energy. Let’s see if you can tell which round is which here:

Like I said, identical!

The next loadout is designed specifically for hunting the invasive predatory species known as “coyotes.” Don’t you worry, it may not look like it, but let me tell you, the .50 BMG round *is* capable of bringing down ‘yotes, and there’s very little report to wake the neighbors in your homeowners’ association.

Coyotes, possums, raccoons and large rodents are easy pickins with this lightweight, wieldy rifle platform — the Barrett M107A1.

 

[Jumper]

New life for my 7mm-08, Mega MA TEN.

Mega MA TEN matched upper/ lower.
Magpul PRS stock.
Standard spring and buffer.
Geiselle SSA-E trigger.
Craddock charging handle.
JP Lo-Mass operating system.
Bartlein cut rifled barrel chambered in 7mm-08 with spiral fluting. Rifle length +1 gas system.
Superlative arms adjustable gas block.
ZEV wedge lock handguard (titanium barrel nut), (thanks to @HR218 for the tip on where to find one. They're scarce as hens teeth).
Atlas Bipod
SAS Arbiter suppressor.
Steiner T5xi.

84 rounds down the barrel with nothing special handloads shot 2, 5 shot groups .6" and .7".

 

[Forgetful Coyote]

SG 551-2 SWAT, 7 3/4 pound, full auto, 14.3" example of why no one should ever mess with the Swiss.

I've been waiting for another one of these for 25 years.


View attachment 7416339View attachment 7416340View attachment 7416341View attachment 7416342View attachment 7416343View attachment 7416344View attachment 7416345View attachment 7416346

Is there any options to mount an optic?

 

[Forgetful Coyote]

@MSTN do you know what effect the new Swiss gun control law will have on Swiss Arms, Bleiker, Grunig & Elmiger, etc rifle manufacturing?

 

[MSTN]

Not the first clue, no. JDI Imports might, however.

 

[schlaiek]

technically it's a rifle...

 

[MSTN]

Optic mount on order!

 

[deersniper]

 

[TheHorta]

View attachment 7433610

 

[Forgetful Coyote]

technically it's a rifle...

Sweet. Thats the B&T TP9 right? How do you like it and what loads you running in it?

 

[Forgetful Coyote]

SG 551-2 SWAT, 7 3/4 pound, full auto, 14.3" example of why no one should ever mess with the Swiss.

I've been waiting for another one of these for 25 years.


View attachment 7416339View attachment 7416340View attachment 7416341View attachment 7416342View attachment 7416343View attachment 7416344View attachment 7416345View attachment 7416346

Have you ran one suppressed yet? They have adjustable gas system right? How well did it run?

 

[deersniper]

View attachment 7433725

hi point.

You need one

 

[pmclaine]

hi point.

You need one

Bringing 2A to those that need it most......the poors.

I like the philosophy.

 

[schlaiek]

Sweet. Thats the B&T TP9 right? How do you like it and what loads you running in it?

yes, it's a TP9. and I love it. so far it's been reliable with a steady diet of 115 & 124 ball ammo. I've read about people having feeding issues with hollow points, but I haven't had those issues.

 

[auskip07]

Thought i would join the fun and share my sub 1200 dollar build
PSA Gen2 Upper and lower
Rise Armament Trigger
Ballistc Advantage 6.5 cm barel
Vortex diamondback

3 shot group sight it in at 100 yds.

 

[rockchalk06]

Broke "Pedro" in yesterday.

I had a bunch of different match 175 HPBT bullets and some left over Varget from a testing another 308 bolt and loaded them at 2.800" at around 2400 FPS. Mixed brass of FC, LC, RP and Hornady., all fully processed. Apparently I got lucky and tuned the load well. Brass was dropping 3 feet right and 2 feet forward. Every spent round landed in my rifle case by chance.

This is a dream to shoot. Last 5 rounds with iron sights @100 yards off my range bag.

 

[FishinGuns]

My built Noveske 10.5” pistol (matched receivers and 10.5” barrel). Centurion C4 carbine cut-out. LMT e-carrier and standard LMT bolt. Griffin Armament M4SD-K. Micro T-1 in a KAC mount on a 1/2” riser (1.9” height). KAC trigger guard. V7 Ti castle nut, GI Ti barrel nut, S7 bolt catch, and UL port door. Geissele SD-C, posi-snap ambi safety, and mag catch. BRT insert in the FSB, too.

 

[jeffg]

they all look so great!

 

[PBWalsh]

“All other semi-autos”...

posts picture of a bolt rifle...

 

[Stickman]

 

[Stickman]

 

[DPS03]

I'm whoring for a 6.5CM Auto - how's that Aero Precision shooting? I'm thinking about building one and want 24" barrel but Seekins Precision is not offering and 24" complete uppers.

VooDoo

Apologies for not replying to this sooner.

It shoots very, very well. Several hundred rounds of various weights from 120gr up to 147gr and manufacturers Hornady and S&B so far and not one hiccup. The accuracy is sub MOA with the Hornady Match and really, if I were a better shot, I think with the S&B as well.

Loving this barrel and scope in addition to the Aero Precision U/L.

Yes, I had to search for a handguard long enough that was in stock. This is a Leapers 17.4".

 

[MSTN]

Mighty clean 1980 vintage Beretta BM62 with BM59 Tri-Comp installed in place of the useless BM62 muzzle device.

 

[Stickman]

One of my nieces....

 

[tanders11]

 

[TheHorta]

View attachment 7467587

Want to see more of the thing it’s resting against.

 

[tanders11]

Want to see more of the thing it’s resting against.

 

[jheat308]

Ok I would like to join the ranks with some Sigs. Swiss 551 with 556 lower and the other 556s. Painted rifle has rail gone as it chewed the holes up and would no long stay attached. Sig Saur gave me a new 516 to make up for it. Very nice of them.

 

[RSR]

HK MR762

 

[RSR]

Big Boy Semi Autos....

 

[Longshot231]

Big Boy Semi Autos....

View attachment 7480223View attachment 7480224

That dog is looking at that rifle like it's a fire hydrant.

 

[kocustoms]

here's one of my first custom builds.

 

[kocustoms]

And this one that was featured in "guns & ammo Retro"

 

[kocustoms]

and as @TheHorta says this one "won't wake the neighbors in your homeowners’ association!!"

 

[TheHorta]

and as @TheHorta says this one "won't wake the neighbors in your homeowners’ association!!"

View attachment 7486982

Rattle can or Cerakote?

Look mucho seksay!

 

[kocustoms]

Rattle can or Cerakote?

Look mucho seksay!

Thanks buddy!! It’s cerakote. We build custom one offs

 

[TheHorta]

Thanks buddy!! It’s cerakote. We build custom one offs

Coolio! Can I send you mine for the same treatment? Scope and all?

 

[kocustoms]

Coolio! Can I send you mine for the same treatment? Scope and all?

Shoot me a DM

 

[RPGesus]

New life for my 7mm-08, Mega MA TEN.
View attachment 7421963

Mega MA TEN matched upper/ lower.
Magpul PRS stock.
Standard spring and buffer.
Geiselle SSA-E trigger.
Craddock charging handle.
JP Lo-Mass operating system.
Bartlein cut rifled barrel chambered in 7mm-08 with spiral fluting. Rifle length +1 gas system.
Superlative arms adjustable gas block.
ZEV wedge lock handguard (titanium barrel nut), (thanks to @HR218 for the tip on where to find one. They're scarce as hens teeth).
Atlas Bipod
SAS Arbiter suppressor.
Steiner T5xi.

84 rounds down the barrel with nothing special handloads shot 2, 5 shot groups .6" and .7".

How long is your barrel? I'm looking at building a large frame AR in 7mm-08 with a 20" barrel. I was considering rifle length +2, but can't find reliable info on gas systems/port size for this caliber. Any ideas?

 

[Jumper]

This is a plus 1 gas system. I had Craddock Precision decide on port size after telling them it was suppressed and shooting 150gr to 162gr bullets. It works perfectly. I suggested +2 gas but Paul said it wasn't necessary. Try calling Craddock Precision and get their advice. They did great by me.

 

[ThePewFactor]

 

[Jared91]

My Larue OBR 762 in predator control mode. Leupold mk6 H58 with a KAC PVS30

 

[Dragonback13]

Just finished building "The Twins"

 

[Flolito]

Steyr AUG A3

Norinco SVD

WBP AKM

 

[Ale80]

My contribution. Just needs a tax stamp, and a barrel chop and it’ll be complete.

 

[SmithM21]

RPD in semi auto. Built on an unissued matching complete Polish Type 3 Parts Kit. Barrel cut to 16" and the Bipod was also shortened. Has an M60 style Flash Hider and a hanger for a GI M249 Nut Sack.