Hybrid 100v for 6creedmoor

[King_beardsly]

Has anyone worked up a load with this stuff before in a creedmoor? I wanted to get H4350 to work up a load for my new 6cm and the shop was completely out of stock which isn't to shocking. I told them I wanted to run 105 hybrids and they said the hybrid 100v was what I wanted since "it was made for the creedmoor". I know its burn rate is right between h4350 and h4831sc which should yield good results.

 

[rangerlong]

With the 103 gr Hornady ELD-X I got an average of 2999fps with 39.7gr. My SD was 10.7 and the group was .922". That's with a Savage Stealth Evolution with a 26" barrel.

 

[XLR308]

It works great in my 243win loads with 105scenars and 105amax, just be careful with it as it comes on with pressure signs fairly unexpectly and is temp sensitive.
It was very easy to find accurate loads with though and gets good speeds.

 

[King_beardsly]

Good to know, I might have to let it warm up some before working up the load since it's in the low 30's currently and don't need a warm load turning into a blisteringly hot one once the temp go up.

 

[chavezz556]

Imr 4451 is the powder Hodgdon came out with when there was a shortage of H4350.. ive never tried it but u might want to check it out.. or AA4350 is supposed to have similar burn rates just not temp stable

 

[Doc68]

4451 is about a grain more for the same fps in my 6.5 creed. Ive been playing with hybrid myself and found a great node at 41.6gr. At 300 yrds im shooting about a 1.4-1.6" groups. Im running an RPR with a criterion 26" barrel. Loading 105gr HPBT hornandy at 40 thousandths off lands.

 

[Velocity Chad]

100v is my go to powder for my 243. I would think 6 creed would be damn near the same.