Gents,
Well it is about that time. We are expecting to ship our Whiskey-3 Chassis within a few weeks (yeah, I know, two weeks=2years, haha). We are shoring up a few last items, then they will be ready to go. We've pre-sold the majority of them through our newsletter, but held some back for hide members. If you want one, send us an email to info at krg-ops.com (replace at with @). No money is required to pre-order, we'll contact you when it's time to ship.
This run is fixed stocks for the Tikka T3 (other actions coming). Price will be under $890. The plan right now is to be able to upgrade to the folding version with a few different parts. Here's the full spec sheet:
<span style="font-weight: bold">Forend:</span>
-Aluminum, designed for ergonomic feel
-Threaded mounting holes at various positions, total of 18, including two on each side for future accessories
-access hole for action mounting screw, so you can remove the T3 action without removing forend like you have to do on a TRG
-Finish is hard anodize
<span style="font-weight: bold"> “Backbone”/Chassis:</span>
-V-bedding system for consistent contact between action and chassis
-Hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s
-Designed for AICS magazines (with or without front spacer plate)
<span style="font-weight: bold">Trigger Guard/Mag catch:</span>
-Similar in shape to TRG trigger guard but made of aluminum instead of Delrin
-Will accept Barnard trigger for T3 as well as factory trigger
-Mag catch is our popular Catch Extender which improves ergonomics and control
<span style="font-weight: bold">Cheekpiece:</span>
-Infinite adjustable within range (~1.5" range)
-Uses thumbscrew to clamp/loosen
-Cheekpiece must be removed to remove bolt, but this is quick and we have included a simple feature to make the cheekpiece go back to the exact height you set it
-Cheekpiece can be moved forward and backward
-Cheekpiece made of polymer to not transmit heat or cold to your face
<span style="font-weight: bold">Length of Pull:</span>
-Adjustable in ¼” increments with nearly 2” of adjustment range
-Uses two cam locks to ensure a solid fit
-Simple spacer system will be available for those who like to set it and forget it (demand dependent)
<span style="font-weight: bold">Buttstock:</span>
-CNC milled from billet aluminum
-Entire buttstock can be removed for easy storage or transport
-Entire buttstock assembly can be used on a TRG if you should desire
<span style="font-weight: bold">Buttpad:</span>
-Moves vertically to any desired position
-Locks in with set screw
-Buttpad is Remington 700 pattern so user can install aftermarket pre-fit pads (pad included is Remington brand “Supercell”)
-Buttpad can tilt 15 degrees to each side (as if looking directly from the rear down the bore)
<span style="font-weight: bold">Mounting features for slings, monopods, etc:</span>
-Buttstock has built in ambidextrous QD sling mount point, and provisions for a second point higher and further toward the rear
-Buttstock includes picatinny rail from Magpul at the bottom rear to mount a monopod or other device
-Harris bipod stud included on forend
-QD cups can be mounted on any number of positions on sides or bottom of forend
<span style="font-weight: bold"><span style="font-style: italic">Planned</span> future accessories/upgrades:</span>
-A forend with a built in Anschutz rail will be offered as an upgrade at some point
-A quick detach bipod mount that slides in the front of the stock will be offered at some point
-Different sizes of grips will be offered for those who find the standard grip too small or too large
-A folding buttstock will be an option in the future
-We plan to offer a parts kit to turn your fixed stock into a folder (buttstock is modular so it will be an easy swap)
-A variety of forends and attachments will be offered including a wide F-class attachment, and a lightweight carbon fiber or similar forend
-A butthook/bag-rider
-Different rifles. We will be fitting the Sako M995/TRG-S into the Whiskey-3, then both TRG 22 and 42 for those that want something other than the factory stock, followed by others on demand. The buttstock assembly will fit all other versions but the forends won’t due to magazine size/placement differences
-other odds and ends as we think of them
<span style="font-weight: bold">Materials/Finishes:</span>
-All aluminum parts are blasted and hard anodized
-(nearly) All fasteners are stainless steel with black oxide coating
-Steel parts will be either Manganese Phosphated (Parkerized) or salt bath nitrided
-Grip panels will be polyurethane (similar to TRG stock and cheekpiece) with built in texture panels
<span style="font-weight: bold">Weight:</span>
~4lb 14oz w/o mag
<span style="font-weight: bold">Color:</span>
Black
<span style="font-weight: bold">Price: </span>
<$890
<span style="font-weight: bold">Overseas customers:</span>
-We have had a lot of interest from our overseas friends. To make it worth the hassle, we have to get a bunch of these sold to overseas users. We will start a pre-order list for foreign sales and when we hit critical mass, KRG will dive into the paperwork quagmire
All parts designed, made, and assembled in Colorado, USA (except certain COTS and buttpad from Remington)
Well it is about that time. We are expecting to ship our Whiskey-3 Chassis within a few weeks (yeah, I know, two weeks=2years, haha). We are shoring up a few last items, then they will be ready to go. We've pre-sold the majority of them through our newsletter, but held some back for hide members. If you want one, send us an email to info at krg-ops.com (replace at with @). No money is required to pre-order, we'll contact you when it's time to ship.
This run is fixed stocks for the Tikka T3 (other actions coming). Price will be under $890. The plan right now is to be able to upgrade to the folding version with a few different parts. Here's the full spec sheet:
<span style="font-weight: bold">Forend:</span>
-Aluminum, designed for ergonomic feel
-Threaded mounting holes at various positions, total of 18, including two on each side for future accessories
-access hole for action mounting screw, so you can remove the T3 action without removing forend like you have to do on a TRG
-Finish is hard anodize
<span style="font-weight: bold"> “Backbone”/Chassis:</span>
-V-bedding system for consistent contact between action and chassis
-Hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s
-Designed for AICS magazines (with or without front spacer plate)
<span style="font-weight: bold">Trigger Guard/Mag catch:</span>
-Similar in shape to TRG trigger guard but made of aluminum instead of Delrin
-Will accept Barnard trigger for T3 as well as factory trigger
-Mag catch is our popular Catch Extender which improves ergonomics and control
<span style="font-weight: bold">Cheekpiece:</span>
-Infinite adjustable within range (~1.5" range)
-Uses thumbscrew to clamp/loosen
-Cheekpiece must be removed to remove bolt, but this is quick and we have included a simple feature to make the cheekpiece go back to the exact height you set it
-Cheekpiece can be moved forward and backward
-Cheekpiece made of polymer to not transmit heat or cold to your face
<span style="font-weight: bold">Length of Pull:</span>
-Adjustable in ¼” increments with nearly 2” of adjustment range
-Uses two cam locks to ensure a solid fit
-Simple spacer system will be available for those who like to set it and forget it (demand dependent)
<span style="font-weight: bold">Buttstock:</span>
-CNC milled from billet aluminum
-Entire buttstock can be removed for easy storage or transport
-Entire buttstock assembly can be used on a TRG if you should desire
<span style="font-weight: bold">Buttpad:</span>
-Moves vertically to any desired position
-Locks in with set screw
-Buttpad is Remington 700 pattern so user can install aftermarket pre-fit pads (pad included is Remington brand “Supercell”)
-Buttpad can tilt 15 degrees to each side (as if looking directly from the rear down the bore)
<span style="font-weight: bold">Mounting features for slings, monopods, etc:</span>
-Buttstock has built in ambidextrous QD sling mount point, and provisions for a second point higher and further toward the rear
-Buttstock includes picatinny rail from Magpul at the bottom rear to mount a monopod or other device
-Harris bipod stud included on forend
-QD cups can be mounted on any number of positions on sides or bottom of forend
<span style="font-weight: bold"><span style="font-style: italic">Planned</span> future accessories/upgrades:</span>
-A forend with a built in Anschutz rail will be offered as an upgrade at some point
-A quick detach bipod mount that slides in the front of the stock will be offered at some point
-Different sizes of grips will be offered for those who find the standard grip too small or too large
-A folding buttstock will be an option in the future
-We plan to offer a parts kit to turn your fixed stock into a folder (buttstock is modular so it will be an easy swap)
-A variety of forends and attachments will be offered including a wide F-class attachment, and a lightweight carbon fiber or similar forend
-A butthook/bag-rider
-Different rifles. We will be fitting the Sako M995/TRG-S into the Whiskey-3, then both TRG 22 and 42 for those that want something other than the factory stock, followed by others on demand. The buttstock assembly will fit all other versions but the forends won’t due to magazine size/placement differences
-other odds and ends as we think of them
<span style="font-weight: bold">Materials/Finishes:</span>
-All aluminum parts are blasted and hard anodized
-(nearly) All fasteners are stainless steel with black oxide coating
-Steel parts will be either Manganese Phosphated (Parkerized) or salt bath nitrided
-Grip panels will be polyurethane (similar to TRG stock and cheekpiece) with built in texture panels
<span style="font-weight: bold">Weight:</span>
~4lb 14oz w/o mag
<span style="font-weight: bold">Color:</span>
Black
<span style="font-weight: bold">Price: </span>
<$890
<span style="font-weight: bold">Overseas customers:</span>
-We have had a lot of interest from our overseas friends. To make it worth the hassle, we have to get a bunch of these sold to overseas users. We will start a pre-order list for foreign sales and when we hit critical mass, KRG will dive into the paperwork quagmire
All parts designed, made, and assembled in Colorado, USA (except certain COTS and buttpad from Remington)
