If you would have it with 4 barrels
Sako is not mine, just testing it for this month.
Haha it’s a lot of money! I really like the looks of them. My old trg 22 does me okay hahaIf you would have it with 4 barrels
Sako is not mine, just testing it for this month.
$10,600 here in the us10850€ in Finland, a shit load of money
Way out of my budget haha. Even the trg22 a1 at $5500 seems a bit crazy to me but
Finally scoped and range ready,
Tikka .223 win KRG, Razor 5-20, bravo that needs a spigot and bipod upgrade.
Rem 700 .308 in crap paint job Wilderness Terrain, NF SHV 3-10.
Bergara WT 6.5 PRC, Bushnell DMR II in. Bravo that needs some paint. Still on the fence for keeping it as is, or switching up the chassis/stock.
There's a few minor upgrades to accessories coming, but now all I need to do is hit the range!
Tikka .223 win KRG, Razor 5-20, bravo that needs a spigot and bipod upgrade.
Rem 700 .308 in crap paint job Wilderness Terrain, NF SHV 3-10.
Bergara WT 6.5 PRC, Bushnell DMR II in. Bravo that needs some paint. Still on the fence for keeping it as is, or switching up the chassis/stock.
There's a few minor upgrades to accessories coming, but now all I need to do is hit the range!
Last edited:
Man, i would love to shoot those AI rifles even once in my life time.
Love the look of those rifles.
New toy, with temporary optic setup (waiting on my new scope to arrive)… Christensen Arms MPR 16" .308 Win. But honestly, with the 1-10x28 LPVO it’s kind of a cool little rig. Lightweight, compact, handy… Shoots good, too. 
I’ll post more pics and groups when the new Kahles K624i shows up for it.
I’ll post more pics and groups when the new Kahles K624i shows up for it.
Last edited:
Same 6.5x47, but with some fresh upgrades. I should have gotten this tripod several years ago. It makes shooting so much more fun.
What tripod setup is that? Been looking into one like that for coyote hunting.
It’s the RRS TFCT 34L/Anvil 30 setup. Very solid.
I also had to purchase 3 of their SOAR rails with hardware and two of their SC-ARC bipod clamps to make the full conversion for my modern rifles. It was a hit to the budget for sure, but worth it.
Fence photos of my match rifle!
I just received my SDN6 back from AAC as it was converted to a Ranger 7, which means my match rifle is ready to go for the first half of the year. The ranger 7 will sit on this rifle until my kgm r30 gets out of jail.
As is, the rifle sits at 17.5 lbs which is on the lighter end for a match gun. This is partly due to the savage style shank being smaller diameter at the thickest part of the barrel, losing about 1 lb from a regular mtu contour. Awesome for most rifles, but I want that weight in the center. I will be swapping to a proof comp contour barrel in June after my ELR match(already have data for this barrel) for some extra weight, as I've committed to building purpose built rifles. It'll be right at 20 lbs at that point, with similar balance, about 2" in front of the magwell.
Build list
- Zermatt origin short.
- 26" Criterion MTU savage nut, 6.5 creedmoor. Swapping to Proof 26" Comp Contour 6.5 Creedmoor in June
- Krg Bravo, enclosed foreend. Butt and spacer weights(36oz total in rear)
- Leupold mk5 5-25 pr2 mil
- Seekins low rings
- Flatline ops halo
- Trigger tech primary flat
- Q cherry bomb
- Aac ranger 7 w/ Rearden atlas
- Longtucky Supply Sling
I just received my SDN6 back from AAC as it was converted to a Ranger 7, which means my match rifle is ready to go for the first half of the year. The ranger 7 will sit on this rifle until my kgm r30 gets out of jail.
As is, the rifle sits at 17.5 lbs which is on the lighter end for a match gun. This is partly due to the savage style shank being smaller diameter at the thickest part of the barrel, losing about 1 lb from a regular mtu contour. Awesome for most rifles, but I want that weight in the center. I will be swapping to a proof comp contour barrel in June after my ELR match(already have data for this barrel) for some extra weight, as I've committed to building purpose built rifles. It'll be right at 20 lbs at that point, with similar balance, about 2" in front of the magwell.
Build list
- Zermatt origin short.
- 26" Criterion MTU savage nut, 6.5 creedmoor. Swapping to Proof 26" Comp Contour 6.5 Creedmoor in June
- Krg Bravo, enclosed foreend. Butt and spacer weights(36oz total in rear)
- Leupold mk5 5-25 pr2 mil
- Seekins low rings
- Flatline ops halo
- Trigger tech primary flat
- Q cherry bomb
- Aac ranger 7 w/ Rearden atlas
- Longtucky Supply Sling
Dang, I've really been wanting to do a build like this. Makes me want to do it even more, just don't think I want to go the sbr route myselfRem700 w/ 9" KAK 300BO barrel on a Manners CS.
That’s a sweet set up. Did you order the stock directly from Manners?Rem700 w/ 9" KAK 300BO barrel on a Manners CS.
Last edited:
I got the stock from a member here a few years ago.
Just finally got around to putting it all together haha.
Terminus Zeus QC
22” Bartlein M24 1:7.5 in 6.5cm from bugholes
MDT XRS with enclosed forend
Triggertech diamond flat
Vortex Strike Eagle
Hawkins ultralight rings
Dead Air Nomad-L
MDT mag
22” Bartlein M24 1:7.5 in 6.5cm from bugholes
MDT XRS with enclosed forend
Triggertech diamond flat
Vortex Strike Eagle
Hawkins ultralight rings
Dead Air Nomad-L
MDT mag
That is awesome! I Just bought my first XRS to try out and I’m a huge fan.
Meet the twins… 
16” 6mm ARC (top) / 16” .308 Win (bottom)
With matching new Kahles K624i CCW RSW SKMR4 scopes in Seekins Precision 1.00” high rings. They just barely clear the handguard, but 1.00” rings are G-2-G on the MPR with a factory 20MOA rail, and 56mm objective.
If anyone is wondering, that is my Otter Creek Labs Hydrogen-S 7.62 on the 6mm ARC, and my Dead Air Nomad-LT on the .308 Win. Both cans are running an Otter Creek Labs ZR0-DTA direct-thread mount. The fit is superb.
And they sound just as quiet as they look. 
16” 6mm ARC (top) / 16” .308 Win (bottom)
With matching new Kahles K624i CCW RSW SKMR4 scopes in Seekins Precision 1.00” high rings. They just barely clear the handguard, but 1.00” rings are G-2-G on the MPR with a factory 20MOA rail, and 56mm objective.
If anyone is wondering, that is my Otter Creek Labs Hydrogen-S 7.62 on the 6mm ARC, and my Dead Air Nomad-LT on the .308 Win. Both cans are running an Otter Creek Labs ZR0-DTA direct-thread mount. The fit is superb.
And they sound just as quiet as they look.
Last edited:
Testing the M10 .338 Lapua Magnum with Jaki Titan Power suppressor.
jaki.fi
Jaki products | suppressors
The latest lineup of Jaki manufactured suppressors consist of stainless steel RST and aluminum models.
jaki.fi
Hit the range yesterday after getting things set up.
Only snapped a pic of one group, 3 175 FGMM, at 100 yards, out of my .308 setup.
Only snapped a pic of one group, 3 175 FGMM, at 100 yards, out of my .308 setup.
Scope Chaps
Scope Chaps | Custom Scope Covers
Scope Chaps is a U.S. Military Veteran owned small business based in Montana. We provide protective rifle scope objective covers made out of 500D Cordura to protect your expensive optic from unnecessary scratches and abrasion in the field. Scratch-resistant optics covers
www.scopechaps.com
Thank you sir!Scope Chaps
Scope Chaps | Custom Scope Covers
Scope Chaps is a U.S. Military Veteran owned small business based in Montana. We provide protective rifle scope objective covers made out of 500D Cordura to protect your expensive optic from unnecessary scratches and abrasion in the field. Scratch-resistant optics covers
A pair of GAP Tempests builds.
MCS PRS2 Mini Chassi (lug bedded), Bartlien 26 inch GAP #9, TT Diamond Pro, Torch Knobs.
6mm and 6.5mm Creedmoor.
MCS PRS2 Mini Chassi (lug bedded), Bartlien 26 inch GAP #9, TT Diamond Pro, Torch Knobs.
6mm and 6.5mm Creedmoor.
Decided to change to the Aero Precision Solus Chassis with the Brownells deals going on. After my first match this year with a 20" 308Win I also upgraded to a Proof 6 Dasher barrel
5-shot group at 100 yards with Hornady 143 ELD-X ammo for the internet.
Cant Indicator | Brandt Built Concepts
Ocular mounted cant indicator for precision long range, Brandt built concepts
www.brandtbuiltconcepts.com
Absolutely the best level out there.
I really appreciate you sharing, which model did you go with that fits on your MK5?Cant Indicator | Brandt Built Concepts
Ocular mounted cant indicator for precision long range, Brandt built concepts
Absolutely the best level out there.
Standard non rotating for basically anything except the NF Atacr.
I just received the 90 degree mount today. And it’s really nice. Makes things more streamline.
Attachments
And now for something completely different?
Sauer 100 Fieldshoot in 6.5 PRC
Sauer 100 Fieldshoot in 6.5 PRC
Updated twins, with the new ARC M-BRACE 1.26” rings, and scope covers…
Whats the total weight on that build? And was the arca aluminum forend worth it?Put some new paint on the TRG for this year.
