Bighorn tl3 bartlein 1/8 twist 6.5 creedmoor spun up by Mark Gordon at SAC. Whiskey3 enclosed forend topped with a treMor3 mk5 5-25.
Group at 200yds
Group at 200yds
Attachments
Last edited:
Shot this for the first time. TacOps Lima 51 308, 200 yard sandpit. A sweltering 93 degrees and super windy.
Remington 700 Police .308. Threaded 22" 1:10. PDC Customs Gen4 folding Chassis, Burris steel base, Seekins rings, Athlon Ares BTR 4.5-27X50mm Mil-Mil.
UPDATE: New 28" Krieger MTU 308 barrel, Area419 Sidewinder, sawtooth arca rail, Atlas Cal, and Ergo 0° grip. "New pics added"
UPDATE: New 28" Krieger MTU 308 barrel, Area419 Sidewinder, sawtooth arca rail, Atlas Cal, and Ergo 0° grip. "New pics added"
Attachments
Last edited:
Very nice! Who did the paint on the Bravo? Probably one of the best jobs I have seen. I actually had to do a double take as I thought it was a T4A
TRG 22 260 Rem 26 in. Barrel 5x25 PMll
Thank you, paint is by @Short-bus aka Branden at Custom Gun Coatings. He knocked it out of the park I think. Exactly what I wanted.
I got to ask. How much of the ground hog is left?
it's really isn't as bad as you would think.
Those fast small cartridges blow them apart way more. but it sure does make them dead lol
Here's the link for the recipe for Smoked Whistlepig Sandwiches: https://www.realtree.com/timber-2-table-wild-game-recipes/smoked-whistlepig-sandwiches
According to the article; "Once it is shredded and sauced, most people would guess BBQ groundhog was grass fed beef."
Mine is pretty simple but I like it. Howa action with KRG Bravo that I RIT dyed OD.
Last edited:
I call this one, "The European". Sako A7 Roughtech Range in 6.5CM, 1:8" 25" medium heavy barrel, ATRS brake, Zeiss V4 6-24x50, Magpul bipod. Pretty decent for a factory offering.
ARC Nucleus 1.0
20" IBI 223 Wylde Savage prefit 0.820" muzzle
KRG Bravo with Wiebad mini cheek piece
Razor AMG 6-24x50 EBR-7 MRAD
ARC M10 1.1" rings
Atlas PSR bipod
Will be swapping the AMG out to the hunting rifle. Not quite sure what I'll get to replace it yet, but probably a NX8 4-32 or MK V. PST gen II will live on it for the mean time.
ARC Nucleus 1.1
26" IBI 6.5cm Savage prefit 0.840" muzzle
Insite Heathen 0.885" diameter
KRG Whiskey 3 gen 6 with spigot and rubber overmolded cheekpiece
Razor gen II 4.5-27x56 EBR-2c
ARC M10 1.26" rings
Atlas CAL gen II
Shot my first match a couple weeks ago with this rifle. Was pretty awesome.
R700P 308 5R barrel, MPA Ultra lite chassis, Leupold vx3I long range. Not sure If I want camo the stock or not. The receiver is Duracoated OD. Had the bolt jeweled and cerokoted OD. Shot a few groups, impressed with it but not ready to display, still need a good load and a bag rider. Definitely a bad rider.
Second 5 round group after dropping the action into the chassis
Second 5 round group after dropping the action into the chassis
Last edited:
Ruger Precision Rifle in 6.5 PRC.
Dead Air Nomad L direct thread suppressor
Atlas Bipod with spike feet
Vortex Strike Eagle glass
Anarchy Outdoors grip
Custom squeeze bag...(black beans in a sock, in a Crown Royal bag)
Still waiting on the Timney Trigger to come in. Currently the stock one is adjusted down to 2.25 lbs.
Dead Air Nomad L direct thread suppressor
Atlas Bipod with spike feet
Vortex Strike Eagle glass
Anarchy Outdoors grip
Custom squeeze bag...(black beans in a sock, in a Crown Royal bag)
Still waiting on the Timney Trigger to come in. Currently the stock one is adjusted down to 2.25 lbs.
Ruger Precision Rifle in 6.5 PRC.
Dead Air Nomad L direct thread suppressor
Atlas Bipod with spike feet
Vortex Strike Eagle glass
Anarchy Outdoors grip
Custom squeeze bag...(black beans in a sock, in a Crown Royal bag)
Still waiting on the Timney Trigger to come in. Currently the stock one is adjusted down to 2.25 lbs.
View attachment 7388197
View attachment 7388198View attachment 7388201View attachment 7388204
What happen to the Crown Royal ?
Just re-barreled my PGWdti Coyote (.308win). The new barrel is a nice Kreiger MTU 17 Heavy Varmint finished at 28" with a very nice Insite Arms Heathen brake. The barrel is a 5R 1:9" twist, throated +.170" to be optimized for the 185gr Berger Juggernaught bullet. Looking forward to load development starting next week and its first shots. I'm going to try IMR-4064 with this set up.
I drank it many moons ago. I found my stash of Crown Royal bags and Crown Black would be a nice squeeze bag.
Sweet setup! How do you like the chassis?R700P 308 5R barrel, MPA Ultra lite chassis, Leupold vx3I long range. Not sure If I want camo the stock or not. The receiver is Duracoated OD. Had the bolt jeweled and cerokoted OD. Shot a few groups, impressed with it but not ready to display, still need a good load and a bag rider. Definitely a bad rider.
Second 5 round group after dropping the action into the chassis
I love your targetsTook my teenage son out to the 200 yard range today. Let him get behind the GAP in 6.5 Creedmoor.
He wanted to dispose of a few old hard drives as targets.
He's only been behind a bolt gun a few times, did pretty good!
View attachment 7383372
View attachment 7383373
View attachment 7383374
View attachment 7383375
Thanks, my son is looking to take a few more there and pull a bleach bit wipe like HC. But not with a rag!
He's going to hit some of the 2.5 inch drives I have waiting to be destroyed!
He's going to hit some of the 2.5 inch drives I have waiting to be destroyed!
Took him to the range again today. He shot up a few more hard drives at 200 yards.
One hit though the front then you have to wack them on their sides.
Here's his paper group. Maybe he has about 75 rounds fired from a bolt gun. Not bad for a newbie at 200 yards.
My group...
One hit though the front then you have to wack them on their sides.
Here's his paper group. Maybe he has about 75 rounds fired from a bolt gun. Not bad for a newbie at 200 yards.
My group...
Where's the cat, that's what we want to see! Are the bird pictures cat torture?
The evolution continues ...
Just got this sweetie all done up:
6.5 PRC
Curtis Axiom full DLC coat
McMillan M40A1 stock
Bartlein 1:8 M24 contour finished at 20"
Leupold Mark 5 HD
Leupold rings
Hawkins bottom metal
Triggertech Diamond
OG military issued sling I bought on here
Finished weight with loaded mag at 13lbs
6.5 PRC
Curtis Axiom full DLC coat
McMillan M40A1 stock
Bartlein 1:8 M24 contour finished at 20"
Leupold Mark 5 HD
Leupold rings
Hawkins bottom metal
Triggertech Diamond
OG military issued sling I bought on here
Finished weight with loaded mag at 13lbs
Last edited:
Couple of Impacts with Stuteville Barrels
Scorched Earth Camo is 6.5
Copperhead is .308
Scorched Earth Camo is 6.5
Copperhead is .308
Back, but with glass & legs this time
Altus 6.5CM 18" Shorty
Altus 6.5CM 18" Shorty
Last edited:
Cute little thing. Gives a whole new meaning to the term "baby boomer".
Finally got a chance to take this out today. I'm a milsurp guy and clearly I have a shit ton more to learn about long range and modern optics. Found out in front of a crowd that something's up with either my mag or mag catch, as the mag would drop free after every shot.
Vintage GAP. FN Police action 308.
.338 Lapua, Defiance action, 34" Obermeyer barrel, AIAX chassis, Huber 2-stage trigger, Fat bastard brake, S&B 5-25, Ivey mount. I don't have a bipod for it yet, the KAC on it was borrowed from my Vudoo. I have another one in the works on a TAC-338 action with a 36" rock barrel and XLR BMG chassis.
Remington 700 AAC/SD
M-11 MB
Atlas BP
Timney "the hit"
KRG Chassis
Viper pst gen 2
M-11 MB
Atlas BP
Timney "the hit"
KRG Chassis
Viper pst gen 2
NIce compact Tikka 16" package with NightForce riding on top....quick attach Badger brake making it easing to add a can.
Figured I would take a picture off the deck after swapping on the NF I have ever bought. Man this scope is nice, seems very close to the PMii that I just took off, only with more magnification.
I'm so nervous right now looking at the BP barely holding onto the deck rail... lol... Awesome setup
Screw the rifle...... Where do you live??
