Precision Rifles.....show em!!

[kyzim311]

Time to post my oddball setup. Built by Short Action Customs.
Action: Alpha long action
Barrel: 1:8 Twist Bartlein light varmint 28"
Chambering: Long Throat 7 WSM
Stock: Manners PRS1
Scope: Nightforce ATACR 5-25x56

 

[BuLLet]

Amazing looking range, where's that at? Who's cutting the grass???

Not too shabby looking rifle too

Time to post my oddball setup. Built by Short Action Customs.
Action: Alpha long action
Barrel: 1:8 Twist Bartlein light varmint 28"
Chambering: Long Throat 7 WSM
Stock: Manners PRS1
Scope: Nightforce ATACR 5-25x56
View attachment 7481605
View attachment 7481606View attachment 7481607

 

[kyzim311]

Amazing looking range, where's that at? Who's cutting the grass???

Not too shabby looking rifle too

That range is Thunder Valley Precision in Eastern Ohio. Targets at 2,3,4,5,6,7,1000, 1100, 1200 and a mile. Adding a 2300 or 2400 yard target for next year. I usually make a trip there 2-3 times a year, $30 on an open range day for the entire day.

 

[Krob95]

Got the new toy all set up sporting a 16.5” 308 proof carbon fiber barrel and TBAC ultra 9. Have a 24” AI 6.5cm barrel in the closet waiting for me to work up loads.

 

[BuLLet]

Added a GAP Tempest to the Heard. Scoped it and shot it tonight with my son. Bore sighted, and put 20 down the pipe.
Factory Hornady ELD-M 108

 

[BuLLet]

Shot the Deep South Tactical tonight as well. Turning out to be a laser! Factory Hornady ELD-M 108

 

[Deleted member 110994]

Dr. Evil and Mini Me or The Fat Man and Little Boy?

View attachment 7370141

I like those cheek pads, who makes them? Thanks

 

[Triggs75]

I like those cheek pads, who makes them? Thanks

looks like hoptics

https://www.hopticusa.com/soft-goods?page=2

 

[MPrimo]

Origin Action
Cadex Chassis
TT Trigger
Proof CF in 6CM
Cronus

 

[Jefe's Dope]

I like those cheek pads, who makes them? Thanks

Hoptic.

 

[Deleted member 110994]

Hoptic.

Thank you

 

[BuLLet]

Took the GAP Tempest to the sand pit today, Got a .8 inch group with a total of 25 rounds down the pipe @ 200 yards. Some mild wind, factory Hornady 108 ELD-M. Really liking the action.

 

[rkcolt45]

Hope you all don't mind a little new age old school precision rifle.

Henry Big Boy steel frame 44 Magnum
View attachment 7467565

I like the compact lever-action 44’s too (Win trapper). The lever-action: the original assault rifle.

 

[rkcolt45]

264 mag
Krieger 26” 1:8.5
McMillan HTG stock
Nightforce NXS 5.5-22 x 56 mil-dot
140gr Berger elite hunters

 

[rkcolt45]

The 156gr Bergers in my 264 mag are showing promise too. 2-shots at 490yds holding 2nd mil-dot below center.

 

[Vimpelsvd]

Just finished a build on Impact action. It’s a .308

 

[jmw]

Origin Action
Cadex Chassis
TT Trigger
Proof CF in 6CM
Cronus

Where did you get that bag rider

 

[spife7980]

Where did you get that bag rider

From the first cadex bag rider google result

ELR BAG RIDER – Cadex Defence

The ELR bag rider was specifically designed to work with "F-Class" style rear bags. Adapts to most Cadex rifles or chassis rear stocks.

cadexdefence.com

 

[jmw]

From the first cadex bag rider google result

ELR BAG RIDER – Cadex Defence

The ELR bag rider was specifically designed to work with "F-Class" style rear bags. Adapts to most Cadex rifles or chassis rear stocks.

cadexdefence.com

The gentleman already answered me, but thanks so much for your input

 

[onethousandmeters]

Old, old, incredibly old skool build. Rest of the parts are coming in. R700P 308. Floorplate, action screws, and cerakote should be in Friday. View attachment 7468871View attachment 7471104

I think the 700P is an excellent rifle for the money. Great setup.

 

[BuLLet]

Added a brake to my Lima 51 today. Took it and my MRAD to the indoor range and did some testing with it. Just a standard loading of 168 SMK and 43.5 grains of Varget. A load I use in all my bolt guns, nothing worked up for this rifle.

Something funky is going on with the pictures site wide it seems.... FIXED!

 

[onethousandmeters]

Added a brake to my Lima 51 today. Took it and my MRAD to the indoor range and did some testing with it. Just a standard loading of 168 SMK and 43.5 grains of Varget. A load I use in all my bolt guns, nothing worked up for this rifle.

Something funky is going on with the pictures site wide it seems.... FIXED!

View attachment 7492125

View attachment 7492126

View attachment 7492127

View attachment 7492128

Both are awesome setups! I love the MRAD rifle, but I guess I've not really heard of the Lima (no surprise, as I'm sure there are tons of custom makers I've not heard of), but that Lima is simple gorgeous. Thanks for sharing.

 

[BuLLet]

Thank you!

There is a thread all about Tac Ops and their custom built rifle, check it out.

Tac Ops Rifles

Owners please post your gun porn here!

www.snipershide.com

Both are awesome setups! I love the MRAD rifle, but I guess I've not really heard of the Lima (no surprise, as I'm sure there are tons of custom makers I've not heard of), but that Lima is simple gorgeous. Thanks for sharing.

 

[Daleteam6]

Custom 6.5 creedmoor
Athlon Cronus BTR

 

[tarheel7734]

Old, old, incredibly old skool build. Rest of the parts are coming in. R700P 308. Floorplate, action screws, and cerakote should be in Friday. View attachment 7468871View attachment 7471104

Calling that incredibly old school makes me feel really old as we were issued those for quite a while. I am only 42.

 

[Meplat]

She, ain't much, but its honest shooting

Remington 700 Stainless Gen 2 (308 Win)
Nightforce SHV 4-14x F1
Timney 510
Triad Stock Pack

 

[Hudsflywater]

MPA Custom Comp 6mm Creedmoor
Leupold Mark 5 5-25 x 56 MOA
Leupold Rings


Hoping it likes 105 gn RDF's the barrel is specifically chambered for the Hornady 108's. I haven't been able to find any?? Being close to Bend, OR I have great access to Nosler, so I prefer to use their bullets.. Planning on starting with H4350, Nosler Brass and CCI #200 primers. should be a fun rifle!!

Hudsflywater

 

[BuLLet]

Nice looking rifle and that is a great looking shop! Wish I had room like that.

MPA Custom Comp 6mm Creedmoor
Leupold Mark 5 5-25 x 56 MOA
Leupold Rings

View attachment 7495365
Hoping it likes 105 gn RDF's the barrel is specifically chambered for the Hornady 108's. I haven't been able to find any?? Being close to Bend, OR I have great access to Nosler, so I prefer to use their bullets.. Planning on starting with H4350, Nosler Brass and CCI #200 primers. should be a fun rifle!!

Hudsflywater

 

[Hudsflywater]

Nice looking rifle and that is a great looking shop! Wish I had room like that.

Thanks! We just moved in October, still getting it set up.. Thats only one corner!

 

[Redfisher60]

Some of my P-Dog rifles from

when I used to do a lot of that.

 

[NiteQwill]

 

[Sanwizard]

I'll get this thread started again


26" Bartlein M24 .260Rem
Stiller TAC30
Murphy Precision 20MOA Scope Base
XLR Element Folding Chassis
Kampfeld Customs Brake
Jewel HVR 14oz
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 0.92" 34mm Rings
Barrel and Scope Base cerakoted Snipers Grey
Action is melonite from factory

Patriot Valley Arms
26" Bartlein M24 6.5x47L
Bighorn TL3
Receiver DLC / Bolt NP3
XLR Element Folding Chassis
Jewel HVR 14oz
Rugged Suppressors 3 Port QD Brake
Vortex GenII 4.5-27x56 EBR-2C MRAD
Vortex PMR 1.26" 34mm Rings

Ok I will bite. This is my Black Friday build for @ $2900. (Minus scope)

Bugholes (Southern Precision) Bartlien M24 27" 6.5 creed 1/8 twist
Area 419 Defiance Tenacity SA RH
MDT LSS XL Chassis in FDE
MDT SRS Lite Stock FDE
APA Little Bastard Brake
MDT Folding Stock Adapter
CTK Monopod
Caldwell Bipod
MDT Steel Mags
UTG 34mm offset rings
Primary Arms Platinum Apollo.

 

[BuLLet]

Took this out of the safe today, my first Sako TRG 42 probably 15/18 years old. Been mothballed way too long. My son shooting golf balls @ 200 yards. Oh, I added the Sako bipod from the 40% off sale Beretta was having on Labor day.

 

[Montana1000]

Time to post my oddball setup. Built by Short Action Customs.
Action: Alpha long action
Barrel: 1:8 Twist Bartlein light varmint 28"
Chambering: Long Throat 7 WSM
Stock: Manners PRS1
Scope: Nightforce ATACR 5-25x56
View attachment 7481605
View attachment 7481606View attachment 7481607

Very nice rig. How much does it weigh?

 

[kyzim311]

Very nice rig. How much does it weigh?

Just over 15 lbs with a magazine

 

[BeckOlu]

Defiance x Proof x KRG x Vortex Razor AMG (6.5cm)

 

[Sanwizard]

Took this out of the safe today, my first Sako TRG 42 probably 15/18 years old. Been mothballed way too long. My son shooting golf balls @ 200 yards. Oh, I added the Sako bipod from the 40% off sale Beretta was having on Labor day.

View attachment 7498582

View attachment 7498583

View attachment 7498584

View attachment 7498585

Hey! That sure looks like the Calverton range that I shoot at. That and Ridge range by the VA cemetery in Brookhaven.

 

[BuLLet]

Yes indeed it is. I try to go twice a week, as far down the 200 yard side of things. Keeps me safer

Hey! That sure looks like the Calverton range that I shoot at. That and Ridge range by the VA cemetery in Brookhaven.

 

[Sanwizard]

Yes indeed it is. I try to go twice a week, as far down the 200 yard side of things. Keeps me safer

Amen to that Brother! Twice a week is sweet. I have to drive an hour each way to get there. Cant wait to move down to South Carolina where Freedom still reigns. We have a range setup in my kids backyard. 400 yards from the front porch. There be land down there!

 

[Tempest 455]

2017 FTR rifle.

 

[onethousandmeters]

2017 FTR rifle.

That is a truly beautiful setup. Thanks for sharing!!!!

 

[Sanwizard]

2017 FTR rifle.

Holy crap. How long is that Barrel?! Love the bipod also. That rig is a piece of jewelry. Can you provide a parts list?

 

[Tempest 455]

Thanks. It's a Frankenstein FTR rifle I built based off Savage action dual port target action. 32" Benchmark barrel. Used FTR stock I bought on Accurate shooter. Friend did the flames. Timney trigger. Nightforce NXS scope. Seb Joy Pod, which I'm using on another rifle. Shooting Berger 200-20X. Threading barrel now for a EC tuner and will start testing over winter.

 

[Anonymoose]

Here's my "oops I bought a cheap rifle on a whim, then put it in a chassis on a whim now I have too much invested and will rebarrel it, rifle."

• Mossberg Patriot in 6.5 Creedmoor
• MDT LLS Gen2 Chassis
• Burris Signature HD 5-25x50 6.5 CM reticle
• Plan to put a 24" bull barrel, manufacturer undecided.

 

[Sanwizard]

Here's my "oops I bought a cheap rifle on a whim, then put it in a chassis on a whim now I have too much invested and will rebarrel it, rifle."

• Mossberg Patriot in 6.5 Creedmoor
• MDT LLS Gen2 Chassis
• Burris Signature HD 5-25x50 6.5 CM reticle
• Plan to put a 24" bull barrel, manufacturer undecided.

Yeah, i did something similar with a Savage 30-06. Now in a TAC21 chassis. I went with a Criterion and could not be happier! Accuracy very similar to Proof and Bartlien.

 

[Anonymoose]

Yeah, i did something similar with a Savage 30-06. Now in a TAC21 chassis. I went with a Criterion and could not be happier! Accuracy very similar to Proof and Bartlien.

It's been difficult to find a barrel maker that does Mossberg Patriots. McGowan does. I had an offer from crownridgebarrelworks.com to do a custom fitting for a very reasonable price. Not much feedback out there on his work but I may give him a shot. I believe the Patriot share the thread diameter and pitch with Savage but I haven't been able to confirm 100%.

 

[Nimothy]

I just picked this up from Alamo precision this week. It has an old remmington 700 that they trued and sent somewhere to have the firing pin bushed and a m16 extractor installed. It’s a 6.5x47 16.5” proof sendero 1-8twist. The stock is a a3 sporter edge fill that was painted by josh at bmc customs. (I was drunk one night talking to him I mentioned Rhodesian brushstroke, this is what he came up with) the scope is a mk5 in seekins rings.

it weighs 9lb5oz as she sits omega 30 and all. I think I’ll try 130eld’s first and if those don’t work I’ll go lighter.

 

[Sanwizard]

I just picked this up from Alamo precision this week. It has an old remmington 700 that they trued and sent somewhere to have the firing pin bushed and a m16 extractor installed. It’s a 6.5x47 16.5” proof sendero 1-8twist. The stock is a a3 sporter edge fill that was painted by josh at bmc customs. (I was drunk one night talking to him I mentioned Rhodesian brushstroke, this is what he came up with) the scope is a mk5 in seekins rings.View attachment 7505830 it weighs 9lb5oz as she sits omega 30 and all. I think I’ll try 130eld’s first and if those don’t work I’ll go lighter.

Sweet for hunting or target! Nice rig.

 

[TxCazador15]

-Impact Precision 737R action
-Bartlein 26" carbon fiber barrel
-Manners EH1A stock
-ARCA rail
-Atlas bipod
-Nightforce ATACR 7-35x56
-Warne Mountain Tech rings
-Hawkins Tank Brake
-Badger M5 BM
-Triggertech trigger
-Wiebad Mini

Altus Shooting Solutions did the gunsmithing.

 

[Anonymoose]

Ok I will bite. This is my Black Friday build for @ $2900. (Minus scope)

Bugholes (Southern Precision) Bartlien M24 27" 6.5 creed 1/8 twist
Area 419 Defiance Tenacity SA RH
MDT LSS XL Chassis in FDE
MDT SRS Lite Stock FDE
APA Little Bastard Brake
MDT Folding Stock Adapter
CTK Monopod
Caldwell Bipod
MDT Steel Mags
UTG 34mm offset rings
Primary Arms Platinum Apollo.

Are you very tall? That's a long LOP with the folding stock adapter and all those LOP plates. I ask because I need a short-ish LOP and have put off the folding adapter because it adds around 1.75" to the LOP. Amazing build by the way!