-
Having trouble using the site?
Contact support
Original stock took a dump and HS sent a replacement ( I kept the original butt pad so its almost correct) . Paint peeled after opening up the barrel channel. I copied an original return stocks camo scheme. I think it came out pretty good. AS time goes by it should age similarly.
Not my rifle, but copied the scheme.
Final product.
Not my rifle, but copied the scheme.
Final product.
I'm perusing this thread and keep coming back to this post/pic. I'm not a collector by any means. I view my firearms as tools and typically have 1 tool per job (the exception being shotguns where I have two clay-busting 12-gauges so I can shoot with friends/family at the same time).
That part of me loves this post. There's just something sexy about a well-used, and clearly loved rifle.
Hi,
All painted up for the upcoming expo on Halloween.
Sincerely,
Theis
All painted up for the upcoming expo on Halloween.
Sincerely,
Theis
Getting rid of some hard drives @ 200 yards.... MRAD with 6.5 creed
Oh, old tape drive too!
Oh, old tape drive too!
Right out of the gate it's a hammer. That load is not worked up to any rifle and you see the group @ 200 yards. I'll need more time behind it, but no issues whatsoever with my first runs... No feeding issues, no ejecting issues... I'm happy 
28" Medium Palma taper 27" long, 1:8" twist. 6mmBR
Geissele Super Precision Scope Mount
Eliseo R5 Chassis
4-way adjustable buttstock, thumbwheel adjustable cheek piece, rotary-adjustable forend, position-adjustable handstop.
Borden Timed Action
Bix'n Andy Trigger
March 2.5-25x42mm
Geissele Super Precision Scope Mount
Eliseo R5 Chassis
4-way adjustable buttstock, thumbwheel adjustable cheek piece, rotary-adjustable forend, position-adjustable handstop.
Borden Timed Action
Bix'n Andy Trigger
March 2.5-25x42mm
Target is at 200yds. She's a tack driver.
Attachments
K98k Scharfschütze:
Not an original piece, but a great shooter with new barrel, trued action, rebuild zeiss zielsechs scope and refinished stock.
Not an original piece, but a great shooter with new barrel, trued action, rebuild zeiss zielsechs scope and refinished stock.
How do you like that chassis? I’ve had one with the intention of setting up just to shoot steel at 1000yds or so, but I’ve been thinking about selling it and going a different route. I have the rts, not a Palma gun but still.
6.5 CM Ruger American with Oryx Chassis and some accessories...
On a moose hunt the other day:
Sako TRG 22 with KRG folder, Spuhr ISMS, Kahles k624i, Ase Utra SL7BL suppressor.
Sako TRG 22 with KRG folder, Spuhr ISMS, Kahles k624i, Ase Utra SL7BL suppressor.
I quite like the chassis. Has a great deal of adjustment to get the most comfortable positions out of it. I would highly recommend it.
I quite like the chassis. Has a great deal of adjustment to get the most comfortable positions out of it. I would highly recommend it.
Rem action, Hardy Carbon barrel 20", 6.5CM 1/8 twist, Hausken suppressor, 5-25x56 PMII with Grid2 , Spuhr Rail, Spuhr hunting mounts, Triggertech trigger, Atlasworx aics floorplate, original AI 5 shot mag, PSE E-Tac4 Carbon fibre stock 800 grams ( 28.5 oz)
With Sika Deer taken last Sunday at 400m uphill shot. & 8 Month old Choc Lab Gigi.
edi
With Sika Deer taken last Sunday at 400m uphill shot. & 8 Month old Choc Lab Gigi.
edi
Bought myself a new Remmy 300wm earlier this year as my other 300WM was bought off me before I could shoot it properly. This bog stand Remington action and barrel will not grab much attention. Started by removing the stock, the trigger, the floorplate went into the box with bits.
Fitted a Spuhr 20MOA Rail, sprayed the action, Atlasworx floor plate and accurate mag in tactical Coyote Brown. Fitted a Triggertech trigger and we made an E-Tac4 RLA carbon fibre stock for her with FDE base colour. Epoxy bedded. Hausken Suppressor with the mesh inside, Spuhr mount and 3-27x56 PMII with Tremor3. Tier One Bipod.
First group with 178 ELDX doing 2989fps. Shot in a muddy field off the Landrover. No ranges where we are.
edi
Fitted a Spuhr 20MOA Rail, sprayed the action, Atlasworx floor plate and accurate mag in tactical Coyote Brown. Fitted a Triggertech trigger and we made an E-Tac4 RLA carbon fibre stock for her with FDE base colour. Epoxy bedded. Hausken Suppressor with the mesh inside, Spuhr mount and 3-27x56 PMII with Tremor3. Tier One Bipod.
First group with 178 ELDX doing 2989fps. Shot in a muddy field off the Landrover. No ranges where we are.
edi
- 24” Benchmark MTU - chambered by Straight Jacket Armory
- Triggertech Special
- Manners T4A team elite - swamp
- Area 419 hellfire brake and 14” Arca rail
- atlas cal gen 2
- Vortex Razor gen 2 - 4.5-27x56
- Vortex PMR rings - 1.1”
- 19.5 lbs unloaded
New video is up... Hopefully the angle and sound quality is better in this one...
Nice rifles , can't fault your glass , I use 208gr Amax , ADI2217/H1000 , 2870fps , loaded long 3.650 .Bought myself a new Remmy 300wm earlier this year as my other 300WM was bought off me before I could shoot it properly. This bog stand Remington action and barrel will not grab much attention. Started by removing the stock, the trigger, the floorplate went into the box with bits.
Fitted a Spuhr 20MOA Rail, sprayed the action, Atlasworx floor plate and accurate mag in tactical Coyote Brown. Fitted a Triggertech trigger and we made an E-Tac4 RLA carbon fibre stock for her with FDE base colour. Epoxy bedded. Hausken Suppressor with the mesh inside, Spuhr mount and 3-27x56 PMII with Tremor3. Tier One Bipod.
First group with 178 ELDX doing 2989fps. Shot in a muddy field off the Landrover. No ranges where we are.
edi
Hope you got thru the lockdowns in Auckland OK .
Later Chris
Chris, got through the lockdown ok. I fear more on the way even though some say over 90% got the jab here in Ireland infection numbers seem the same as before the jab last year going into winter.
edi
Good day at the range today.
Got to sight in and get used to the AICS AX chassis and Triggertech trigger on the Remington 700. And my friend brought his Swedish K along. Good times, never shot a Swedish K before today, but it was awesome.
Got to sight in and get used to the AICS AX chassis and Triggertech trigger on the Remington 700. And my friend brought his Swedish K along. Good times, never shot a Swedish K before today, but it was awesome.
@Hedgepeth0
Slow your roll.
I know there are tons of awesome builds in this thread. If you want to show appreciation the like button is your friend. There is no benefit to having lots of posts.
Slow your roll.
I know there are tons of awesome builds in this thread. If you want to show appreciation the like button is your friend. There is no benefit to having lots of posts.
He’s just confused why his PX access didn’t kick in at 100 posts.
Rifle I’ve had for many years was a 6mm Rem.. had rebarrelled to .300WSM PROOF Research sendero carbon fiber wrapped. Hs precision stock with barrel channel opened up for the heavier barrel.
COAL is too long so poly tips will not load in mag box.. that sucks but lapua megas in 200gr shoot amazing and load fine. They are a hammer on deer, bear, and sheep.. haven’t had op for anything else.
Swarovski z6i 5-30x50
I painted both to match..
Last edited:
Great looking rifle. My nucleus action should be here this week for my gunsmith to chamber my 65 Creedmoor Brux HV Barrel it'll be going into the xylo chassis. Looking forward to a great shooter. I love the xylo. Fits my hand like a glove. I'm loving what American Rifle Company is doing with its products.
7mm Practical
Built by Patrick Jones @ Trigger Time Gun Club Longmont, CO
MDT - ESS Folding Chassis
Archimedes American Rifle Action
SPUHR SP-4616 Mount 20 MOA - 20 MOA on the Action
Schmidt & Bender 5-25x56 PMII/Gen.II XR 1cm CCW
28" Shilen Barrel Ratchet rifled 4 groove
Flat Trigger Tech Two Stage Diamond
Adaptive Tuning Systems
Thunder Beast Ultra 9 Suppressor or Area 419 Sidewinder Magnum Muzzle Brake
Atlas PSR Bipod
N570 75grs, 190gr Hornady A-Tip, 3,100 fps, Magneto Speed
Built by Patrick Jones @ Trigger Time Gun Club Longmont, CO
MDT - ESS Folding Chassis
Archimedes American Rifle Action
SPUHR SP-4616 Mount 20 MOA - 20 MOA on the Action
Schmidt & Bender 5-25x56 PMII/Gen.II XR 1cm CCW
28" Shilen Barrel Ratchet rifled 4 groove
Flat Trigger Tech Two Stage Diamond
Adaptive Tuning Systems
Thunder Beast Ultra 9 Suppressor or Area 419 Sidewinder Magnum Muzzle Brake
Atlas PSR Bipod
N570 75grs, 190gr Hornady A-Tip, 3,100 fps, Magneto Speed
Attachments
6creed, timney trigger, defiance tenacity, proof prefit, DIY stock from a hunk of quilted maple with some rosewood accents.
Which bat is that? Thinking of adding bat to the line up.
It's a BAT TR. Their "tactical" line. Most everything they build is for bench rest. But the TR is a very good prs action thus far in my experience. However it's only one so take that for what it's worth.
