Rimfire Rifle Photos Thread

[Asared]

Anschutz 1761 MPR, Anschutz Comfort Butt Plate Carrier, Discovery Optics 5-25X50 Scope, BKL Rings, Kalix Teknik Cheek Riser, D3 Precision Trigger Blade, Atlas CAL Bipod.

 

[onion]

Alright, I finally got around to taking a photo, here's my Anschütz and a box of junk ammo.

 

[Tokay444]

I’m stunned.
40 year old rifle. 40 year old Eley Match ammo. Shit front rest. Shit rear bag. 25m with aperture peep sights that likely haven’t been adjusted in 40 years either. This is my first time shooting this gun in this capacity. I’ve played Battleship with my daughter against her scoped Savage, and won. Now I can understand why.

 

[onion]

I’m stunned.
40 year old rifle. 40 year old Eley Match ammo. Shit front rest. Shit rear bag. 25m with aperture peep sights that likely haven’t been adjusted in 40 years either. This is my first time shooting this gun in this capacity. I’ve played Battleship with my daughter against her scoped Savage, and won. Now I can understand why.
View attachment 7416852
View attachment 7416853

Those aperture sights are insanely good. I looked through them once and that's when I knew I needed an Anschütz with those sights.

 

[Tokay444]

Those aperture sights are insanely good. I looked through them once and that's when I knew I needed an Anschütz with those sights.

You’re not wrong, but, I can see the entire orange square and a few rows of white squares around through the front site. I think I’m more impressed with myself than the gun. It is clearly better than I am. Both in accuracy and precision.

 

[onion]

You’re not wrong, but, I can see the entire orange square and a few rows of white squares around through the front site. I think I’m more impressed with myself than the gun. It is clearly better than I am. Both in accuracy and precision.

Same here, I will never be able to shoot as well as my Anschütz is able to.

 

[1bdvet]

Nice shooting, very accurate, just shows you never forget, like ride a bike!

 

[mrt949]

Top Rifle is an izmash bk-7-2-ko basic biathlon... I think I have that model number correct. The stock is from a G&G Airsoft rifle that was no longer functioning. It's pretty crappy but it's functional and fits me better than the original cheap ass stock.

2nd rifle is a CMP Remington 40x manufactured in the mid-60s... standard Redfield Olympic sights. It's sitting in an old McMillan NRA high power stock... it used to be called modified 40x.

NICE SETUP ENJOY

 

[Tokay444]

My above posted Anschütz came with a few boxes of each of these. So far I’ve only had a chance to shoot the Eley through it

 

[kc7pwx]

Just a plain jane looking Ruger 10/22.
Butler Creek stock
Crossfire bolt
Advantage charging handle(left handed)
Spartan skeletonized charging handle.
Gemtech Mist barrel.

 

[gadget1968]

Down the rabbit hole / B-14R Carbon Rifle / Tangent Theta / SPUHR Mount / Cadex Bipod / Trigger Tech 700 Special Trigger

 

[Shifty6BR]

Up in Zermatt sticky but why not..

Rim x lefty variety

 

[FromMyColdDeadHand]

No picture, just a 'funny' story. I have my 40X Elrod Conversion in an AICS stick and Vortex 5-25 scope sitting on a bench at the range. Group drives up, starts to set up, little chit chat. A guy asks if that is a 6.5 Creed,

I say, "No, its a 22."

"22 Magnum?"

I say, "No just a 22."

He looks confused.

I say, "It's just a 22 long rifle."

And it is a 'long rifle' with with a 24 inch barrel...

"Um, a 22?"

'Yep, just a 22 trainer.' I say.

I can hear him mutter, 'magnum?' as he walked back to his group...

 

[Sniff]

My BSA International single shot Martini Action. Shortened and threaded for a suppressor. The one shown is a stainless MAE, originally on one of my .223s

The rifle shoot under an inch at 100m with good ammo.

The other is my S&W M&P 15/22 fitted with an Aimpoint M4S and a DPT .22 suppressor with a couple of extra baffles.

It's essentually a .22 version of the M4s we use at work.

 

[Shifty6BR]

No picture, just a 'funny' story. I have my 40X Elrod Conversion in an AICS stick and Vortex 5-25 scope sitting on a bench at the range. Group drives up, starts to set up, little chit chat. A guy asks if that is a 6.5 Creed,.....

Jonathan did the work on my rifle..fantastic job and helluva nice guy.

 

[DRAGON64]

Tikka T1X 22LR

The optic is an Arken Optics 6-24X50 (34mm tube)
The stock is a Bell and Carlson Target/Competition stock (T1X specific)
Bottom metal by Mountain Tactical
Sterk canted bolt handle
DIP 20moa pic rail
Gemtech Inert Suppressor (silences a little, but mostly lowers my poi)
Harris 6X9

 

[RETE8]

Tikka T1X .22LR
First Gen PST Viper 6X24
DIP 25 MOA Rail
KRG Bravo Chassis

 

[Baracuda22]

hey yu folks, you all have a very nice looking rigs.

 

[Mr. Wolf]

Greetings,

My rimfire (CZ 457) and my wife's (Savage B22 Precision).
Build Intent: 1. centerfire trainer, 2. NRL22 base class, 3. plinking

CZ 457 Pro Varmint (22 LR)
Yo Dave trigger at 1 lb 3 oz
Athlon Argos Gen 2 6-24x50
Amazon bubble level
Weaver 30mm medium height scope rings
Athlon scope covers (included with scope)
Trigger by Scar 25 MOA rail
Harris 6-9" bipod
Beartooth Comb Height Adjustment sleeve
TBAC 22 Takedown suppressor (in jail)

Savage B22 Precision (22LR)
EGW 20 MOA rail
Arken SH4 4-14x44
Amazon bubble level
Vortex 30mm low scope rings
Butler Creek scope covers
West Lake 6-9" bipod

 

[Shooter McGavin]

Just got a new Bergara B14 .22lr
KRG Stock
Viper PST Gen II 3-15x44 FFP

 

[Mk12]

Just got a new Bergara B14 .22lr
KRG Stock
Viper PST Gen II 3-15x44 FFP

Any issues with the Bravo?

 

[Shooter McGavin]

Any issues with the Bravo?

No same fit as a R700 action

 

[TT92]

First post here.

CZ455 Stainless, 22” IBI barrel, PDC Customs chassis, Leupold Mark 5. My favorite Rimfire.

 

[Jefe's Dope]

First post here.

CZ455 Stainless, 22” IBI barrel, PDC Customs chassis, Leupold Mark 5. My favorite Rimfire.

The sticker on the sunshade looks really cool and helps break up the loooooong look of a sunshade.

 

[mjbaker22]

Brownell’s BRN-22 Receiver
Kidd Barrel
Kidd 2-Stage Trigger
Accurate Rifle System Chassis
Viper PST Gen II 5-25x50 FFP

 

[AggieJack]

First post here.

CZ455 Stainless, 22” IBI barrel, PDC Customs chassis, Leupold Mark 5. My favorite Rimfire.

Is that an MDT grip? Was it difficult to fit?

 

[DRAGON64]

Looks like an Ergo Vertical grip.

 

[Badjujuu]

CZ455 in MPA Chassis with SwampFox Warhawk Glass
Vudoo Gun Works in Cadex Defence Lite Competition Chassis with Vortex PST GEN2

 

[tjh011]

How would you compare the warhawk to your PST?

 

[Badjujuu]

How would you compare the warhawk to your PST?

The good:

Like Warhawk reticle - especially the elevation hashmarsks @ 2/4/6/8 etc.....
Clarity, brightness is surprisingly good.
I do like the turrets ability to pull up, adjust and push down to lock it..
Included throw lever and scope caps

the bad:

Turrets are bit mushy
34mm rings

It's mounted on a 22lr, so it holds zero and it works. Miss took 2nd in 22lr long range shooting match this weekend up to 300 yards and the dope/scope worked out very well for her.

For the price....it's totally worth it....(I got mil discount on it)

 

[Kisssofdeath]

That Cadex looks nice, to bad they cost to much for me.

 

[Badjujuu]

That Cadex looks nice, to bad they cost to much for me.

I love my cadex......but.....
IMHO, my next vudoo will be in MPA chassis

 

[Kisssofdeath]

I love my cadex......but.....
IMHO, my next vudoo will be in MPA chassis

Yeah, I'm waiting around for Black Friday again. I bought my two MPA's last year, saved probably $500 or more.

 

[Badjujuu]

Yeah, I'm waiting around for Black Friday again. I bought my two MPA's last year, saved probably $500 or more.

Yup..I picked up the CZ455 one during their grenade specials... couldn't say no to the deal...

 

[tacops1]

Just got this one this week..... I wanted a cost effective semi auto with accuracy, quality and just to plink around and take care of pests I hope when I get to zero it this weekend it’s a Shooter

Kidd super grade
16.5 “ fluted and threaded ultra light barrel
2lb single stage trigger
Magpul hunter stock OD Green
0 moa rail
ARC Low 1” rings
Leupold VX-Freedom 3-9x40 rimfire MOA optic

 

[Mr. Wolf]

Beautiful set up for plinking and pest control. I hope you post a report of how she shoots.
How much does she weigh?

Thank you and happy shooting.

 

[tacops1]

Beautiful set up for plinking and pest control. I hope you post a report of how she shoots.
How much does she weigh?

Thank you and happy shooting.

I will thanks and it will be suppressed 100% of the time.

It’s around 5.25lbs for the ultra light weight

 

[Baracuda22]

Folks, you all have a very good looking licking rigs here.Just want to share my R.A.T. 22LR REBARELLED
1.mcarbo trigger job 1lbs.- now
2.lilja tight bore 4g 16t .920 STRAIGHT 25"
3.PTG MATCH CHAMBER
4.OPEN UP BARREL CHANNEL TO Accommodate .920 BULL BARREL
5.TACTICAL BOTTOM METAL UPGRADE
6.EXTENDED MAGAZINE RELEASE UPGRADE
7.FINAL UPGRADE: Action/Barrel Threaded together for more stability shooting in any position.

 

[Mr. Wolf]

Updated photo:
CZ 457 Pro Varmint 22 LR
Triggers by Scar 25 MOA rail and CZ 457 Pro Varmint bipod adapter
Atlas CAL bipod
Athlon Argos BTR gen 2 6-24 x 50 with included scope caps
Amazon bubble level
Weaver medium height 30mm rings
Beartooth comb riser
Yo Dave trigger kit set at 1 lbs 12 oz
Thunderbeast 22 Takedown suppressor

Proportions look much better IMHO and the report is only a bit louder than a pellet gun.
YMMV, happy shooting.

 

[TeebirdsRoc]

Snapped 2 quick photos of the new toy.

RimX
Keystone Accuracy 24 inch Bartlien M24
TT diamond 2 stage
Athlon Ares ETR 4.5-30x56
Warne Skyline precision mount
XLR Envy Pro chassis w/ folding adapter
Atlas BT-65 CAL w/ area419 arca clamp

 

[brians13]

CZ 457

 

[Mr. Wolf]

Snapped 2 quick photos of the new toy.

RimX
Keystone Accuracy 24 inch Bartlien M24
TT diamond 2 stage
Athlon Ares ETR 4.5-30x56
Warne Skyline precision mount
XLR Envy Pro chassis w/ folding adapter
Atlas BT-65 CAL w/ area419 arca clamp
View attachment 7447592View attachment 7447593

TeeBirdsRoc-
Top notch build. Would you mind sharing the reasoning/purpose behind the build?
Thanks and cheers,

 

[TeebirdsRoc]

TeeBirdsRoc-
Top notch build. Would you mind sharing the reasoning/purpose behind the build?
Thanks and cheers,

Thanks, I wanted something bigger/heavier than my CZ457 and something really nice haha. This was my first venture into a custom rifle, wanted something I would shoot alot, and if I ever find myself living somewhere I can shoot long ranges, I'm a barreled action away from a sweet long range setup.

 

[Baracuda22]

A few upgrades rifle.

 

[Frankr]

A few upgrades rifle.

What's the barrel on the MagPul stocked one? Looks like a running boar barrel but can't tell.
Nice collection of 10/22's

 

[Baracuda22]

What's the barrel on the MagPul stocked one? Looks like a running boar barrel but can't tell.
Nice collection of 10/22's

Sir Frankr,Thank you! The barrel is 1:9 Volquartsen.And yes you are correct VOLQUARTSEN RUNNING BOAR BARREL 1:9 TWIST.Sorry my memory is a little bit clouded its been a longtime and they are not making this barrel anymore.

 

[stevebla]

Kidd parts 10/22 16" barrel

 

[Frankr]

Kidd parts 10/22 16" barrel

So cool. How does it shoot and is that the new SE 5-25 (if so how do you like it for rimfire)?

If you are interested. Nordic Components makes a gap filler (black) that will fit between your trigger guard and your pistol grip.

I have one on my PMACA chassis and it works well. Some guys make our out of some sort of a Bondo type putty also.

 

[stevebla]

Frankr it is the old Strike Eagle 4x24x50 The rifle is reliable and shoots sub MOA out to 50 yards. I haven't shot much paper at 100 yards. I love the rifle! You can get that scope at euro optics for $309 good scope for the money.

 

[WaWaZilla]

CZ457 MPA Athlon Cronus Pew Pew