Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
- Nov 3, 2010
- 10,242
- 22,127
Be interesting to see if they offer just the manners for 10/22 platforms.
Didn't manners themselves at one point do the cs stock for the 10/22? Did they stop?
- Nov 3, 2010
- 10,242
- 22,127
Hell, I guess I didn’t even know that. It still shows up on their sight, so assuming they still offer it. I stand corrected, thanks
looks like an l3i designs. Or if you have a 3d printer atlas target works has a free file for one
Always wanted to do this....My Wife inherited a Ruger 10/22 from her Dad's collection and asked me if I would trick it out/lighten it up (she's 5' tall/100 lbs) and get an adjustable stock and red dot sights. So over the Holiday Break I spiffed her all up with a Gungner Polymer chassis and adjustable AR Buttstock. Replaced the barrel with a 16.5" helical fluted barrel (12 oz!!!) from Tactical Solutions and added a compensator/brake, Ruger 25 round mags, Bushnell reflex Red Dot, a green laser on the underside front Picatinny rail, oversize red charging handle, and Ergo SureGrip.
Mama is very happy with her upgraded Ruger 10/22.
VooDoo
That looks great VooDoo. I have an old Ruger kicking around and you've inspired me to do the same sort of setup for my wife.
New here. Sharing the newest piece to my range bag.
Begara b14r carbon barreled action. Pork sword chasis. Vortex diamondback 4-16x44. Still waiting for a couple of other parts ordered and quality ammo.
Begara b14r carbon barreled action. Pork sword chasis. Vortex diamondback 4-16x44. Still waiting for a couple of other parts ordered and quality ammo.
Manners just showed up a few days ago
Cz457
That looks great. I paid $880 for my VPT, a new stock cost almost that much. The more I shoot it the better it does. I think this one’s a keeper. I do have a new Annie on the way though.
Nothing fancy, just the farm rifle, but the Tikka in .17 HMR continually amazes me at how little it needs to take rock chucks out at 100-150 yards. Harris bipod, Talley rings, and a cheap 6-18 Chinese Vortex. I keep waiting for the scope to fall apart, but so far it’s been great.
My Kestrel says 3.70 Mils for that distance, must have it calibrated pretty close to the same as yours. 20" barrel?
My new VGW V22 Build straight from Vudoo
Vudoo V22 Gen II
MPA BA Comp in Vudoo Green Cerakote
20' ACE MTU contour barrel
TT Diamond single stage Flat trigger
Athlon Cronus BTR Gen2 4.5-29x56 with tenebraex scope caps on a 30 MOA rail
Ckye-pod PRS length
Wiebad mini stock pad
absolute dream build! she's an absolute hammer - the Vudoo Green Cerakote changes colors in different light as well
Vudoo V22 Gen II
MPA BA Comp in Vudoo Green Cerakote
20' ACE MTU contour barrel
TT Diamond single stage Flat trigger
Athlon Cronus BTR Gen2 4.5-29x56 with tenebraex scope caps on a 30 MOA rail
Ckye-pod PRS length
Wiebad mini stock pad
absolute dream build! she's an absolute hammer - the Vudoo Green Cerakote changes colors in different light as well
Last edited:
Replaced the vortex with another 3-20 bender, it now matches big brother better.
Also ordered a timney flat trigger so they’ll both have that in common too now
Edit: Few pics from today, wanted to confirm zero on the 224v after having the thermal on it, and got to shoot the .22 for a little while, ammo was SK Standard Plus, still want to try a few different rounds but not bad 5 shot groups with the standard plus. Other pic is up top not sure why it went to the top..
Last edited:
Left handed V22
McMillan (went with retro forest)
Ares ETR
Triggertech diamond
DA Mask
Magpul bipod
Group is a 10 shot group at 50yds off a bipod and bag with Midas+.
McMillan (went with retro forest)
Ares ETR
Triggertech diamond
DA Mask
Magpul bipod
Group is a 10 shot group at 50yds off a bipod and bag with Midas+.
Attachments
Last edited:
Rimx
Proof 18in
Mdt hnt26
Tt diamond
Minox zp5
Proof 18in
Mdt hnt26
Tt diamond
Minox zp5
Finally put mine together
Bergara B14R steel barreled action
McMillan A5
Hawkins M5 bottom metal w/long latch
EGW HD 20 moa base
Arken EP4 6-24X50 mil
Dead Air Mask
Bergara B14R steel barreled action
McMillan A5
Hawkins M5 bottom metal w/long latch
EGW HD 20 moa base
Arken EP4 6-24X50 mil
Dead Air Mask
Last edited:
I guess I never posted these here. I built 2 V-22s for my daughter's to shoot with me. Unfortunately they never have time to go...
Heck with rifles like that, I would shoot with you!
I am available for adoption!
Beautiful brace of Vudoo's, sir!
CZ455 in a tungsten PDC G5LE chassis. NF NX8 4-32 F1, SiCo sparrow, Atlas PSR, and a Badger Unimount.
CZ 457 VPT and VPT MTR. Both are set up for ARA Factory class for now. Both have BScar 3oz. single stage triggers and Sinclair F class bipods.
Dang, 3oz trigger, can you feel it when it breaks? A buddy has a center fire with a 2oz trigger, when you think your finger touches it, it goes bang.
At first it feels that way. You can touch them, but it only takes a minimal amount of pull to break the shot. Actually for what I’m using them for I wouldn’t mind them being a little lighter.
Empirically speaking it does. Testing show's an aggregate gain of roughly 1/8th to 1/4-inch improvement in overall group size. And a significantly reduction in offhand POA / POI dispersion. But hey your just here for the troll I guess. NICE !
It is simply the standard BXR-01 steel with a KIDD two stage swapped for the Bergara trigger unit. Nothing else changed. The BXR is a bit tighter tolerance than the standard 10/22. Run one against a stock 10/22 if you get the chance and you can easily tell. They feel smoother more "snik", "sink" than clack, clack. The OME trigger wasn't bad at all. Just I like nice things. And a KIDD is a nice trigger for sure.
I'm sure Steve Foster and TODD at Wiland can set you up with all the machining CAD / machining metrics you need to satisfy your obvious bias. Anyone at first glance would characterize your first comment as trollist, truly if it was just, you being you then you can understand my retort.
We have 5 full Kidd ULW rifles, 4 for Rimfire Challenge (one for me, each daughter and son-in-law) and the other one is my "Squirrel Gun"...there's a picture of the squirrel gun at the top of the previous page. I also have another Kidd trigger in my Ruger 10/22 Target with the 20" stainless "spiral" barrel. They are great triggers!
Fantastic ! ,..... scarry thought! imagine a world without .22lr or 10/22 platform. I'd be sad.
Hi, my name is Cowpokey and I'm a .22lr addict. I have somewhere north of 30 of them right now.
I'm getting there! Only have three but really think a Norrel trigger pack is next... for reasons!
When people settle down and stop "conspiracy chasing" and think honestly about how much rimfire they shoot. Add it up and think about the larger ever increasing market size that needs to be feed. They start to see the reality and stop conjecture. Last weekend me , my wife and daughter together shot in excess of 2k rounds Fri/Sat. that's just one weekend getting away. And conservatively let's say 40 weekends a year. That's 80K. That's a lot and then everyone else thats a rimfire shooter on the planet lumped in. NO WONDER we have a shortage. Not because of evil poli-social gremlins...
Funny! I have north of 14,000 rounds of .22lr on hand...need a couple more cases though. Burn though a lot of rounds doing rimfire challenge, especially if more than one of the kids go with me.Hell even I have more than 30 rounds off 22 ammo.
I miss pre-covid days.. I'm down to 1.5 cases now and limited to only like 1 case a quarter.
Similar threads
