PLEASE SIR! can I have somore? .. dang that's a beautiful sight.
Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
I have just short of a case and a half of SK-PM, and about the same for CCI-SV, along with some other "flavors". I really need a couple cases of Blazers; that's our (my) preferred RFC ammo for both rifle and pistol. Used to get Blazers for $18/brick and CCI-SV for $24/brick.
Can't stop putting these together: TacSol receiver, Kidd trigger, Beyer barrel, Enoch Deep Six chassis, SB 1913A3 folding brace, Surefire Ryder 22 suppressor.
Last edited:
If i had property then I would have probably shot all of the 22 ammo that I have within a short time of getting the integral put on.
Nice Owl Fairy Lamp collection. We have the same ones...and 300 others. Became an obsession searching through antique stores!
TY, My wife and I used to antique a lot. then the economy went tits up and we went to saving every penny. Except for ammo.
Just checked the price. I was a able to stop immediately. Nice looking pistol tho...
Wow. I bought 3 cases of Center X from the testing center last year. I just did inventory and I can’t believe I only have a couple brick of each left. So Monday I’m shipping one out to Mesa. I’m in the queue for Marengo, but Luke left for greener pastures and all appointments have been suspended. Also now you can only buy one case at a time. I’m going to have to slow down.
Just mounted the Bergara B14r in the XLR industries Element 4.0 chassis. Mounted on top is the Vortex strike Eagle 5-25 with XLR rings. Had to put some tape on the back of the mag to keep it from rocking. Seems to be feeding well. Going to test this weekend.
Yep mine also would feed first 5 rds reliably then jam every round after that. 100% reliable after installing tape to hold it in place
That’s where I applied the tape. I used electrical tape. What tape did you use? Has it been durable? The magwell on the XLR seems to be bigger than the MPA. Didn’t have any real front to back play with that chassis. But I love the Element chassis. It’s really light weight which is what I was going for.Yep mine also would feed first 5 rds reliably then jam every round after that. 100% reliable after installing tape to hold it in place
That’s just regular scotch tape and don’t see it lasting long. Just wanted to know if building up that area would remedy the issue and it does. When I get a chance I’m gonna use a thin layer of epoxy for durability and file it down and fit it to the magazine well.
Finally a morning I can go shooting as a neighbor is watching my wife ( early stages of dementia, it sucks) and the weather is cool and very damp I would expect the range to be muddy. Oh well another day but at least a picture of my toy.
Right is a Ruger 10/22 customized by Volquarson. The middle a Vudoo repeater with a Nightforce scope and the left a single shot with a Kales scope. Both the bolt guns have Jewel triggers. The 10/22 is set up for offhand at steel targets . All three fun to shoot and brings smiles to this old guys face. Enjoy the eye candy
Right is a Ruger 10/22 customized by Volquarson. The middle a Vudoo repeater with a Nightforce scope and the left a single shot with a Kales scope. Both the bolt guns have Jewel triggers. The 10/22 is set up for offhand at steel targets . All three fun to shoot and brings smiles to this old guys face. Enjoy the eye candy
Attachments
Very nice, bet they shoot as good as they look, LH actions are a big plus.
All the best with your wife, I've been down that road with parents, what you are going through must be 100x more difficult.
Glad that you can get a little time for yourself, hope the weather is better next time.
Dan
All the best with your wife, I've been down that road with parents, what you are going through must be 100x more difficult.
Glad that you can get a little time for yourself, hope the weather is better next time.
Dan
That is a sweet setup! I love my Arken scopes, and I love my DA Mask HD. I've been interested in building a B14R Steel in a chassis, but I like that stock. Do you have any pics of the sides of the grip's palmswell? I'm curious to know how fat it is? Is it like an HS Precision, or smaller like a Browning A-Bolt II? Been a long time since I handled a McMillan stock...So I can't remember.
Kidd 10/22 in PDC Custom chassis, 16.5” ultralight weight barrel with 2 stage trigger. Athlon Cronus scope.
Vudoo V22 in MPA Hybrid chassis. 22” MTU contour barrel. Two stage trigger tech diamond. Athlon cronus.
Vudoo V22 in MPA Hybrid chassis. 22” MTU contour barrel. Two stage trigger tech diamond. Athlon cronus.
Attachments
That's what it looks like to me also. With a build like that a heavy bull barrel might have been a better option. Don't get me wrong, the ULW barrels are nice.
Da' Shaft
This is a 3 lb weight to help balance those light weight rifles when you need it. It mounts on an arca rail so you can slide where you need it.
www.nedvedprecisionshooting.com
You got it - it is Da Shaft! I have another 1.5 pounds that can bolt onto it, but I find the 3 pounds works incredibly well.
This gun is primarily shot by my 13 year old daughter in NRL22 competitions. I have a bull barrel already for it, but she manages quite well with the ULW barrel. I was at the range earlier this week doing some practice, checking to see what the balance point was for it and the Vudoo, so that is why it is on there.
This gun is primarily shot by my 13 year old daughter in NRL22 competitions. I have a bull barrel already for it, but she manages quite well with the ULW barrel. I was at the range earlier this week doing some practice, checking to see what the balance point was for it and the Vudoo, so that is why it is on there.
anyone tricked out a M&P22/tippman/hammerli ? i have a vudoo that matches my centerfire but wanting semi auto platform that resembles my mk12 or a recce build WITH the accuracy we expect from our comp bolt guns (with in reason)
not looking for science just the pics
not looking for science just the pics
Nothing really to do as far as "tricking out" a Tippmann...unless you want to replace the trigger, or put a different stock or grip on. The trigger in mine is way better (stock) than any AR stock trigger. Accuracy out of the Tippmann is remarkable.
I put a scope on, a Magpul M-Lok bipod/sling stud, and a Magpul (MAG529) socket for the buffer tube plate. None of that made it more accurate, just personal preference.
ETA: I wouldn't put it up against my Vudoo, they aren't in the same zip code.
oh i agree on the zipcode thing. i did see the M&P has a volqartsen barrel as 16 and was going to run handguards up to the threads and put my 9mm can (fullsize/user servicable / looks) on the front. not sure how much i would want to shoot .22 thru actual AEM5 or i would just do the CMMG? adaptor
I didn't know M&P were running VQ barrels. I went with the Tippmann because I didn't like the M&P Poly/glass upper and lower. Tippmann is aluminum upper and lower, like a normal AR.
This gun is primarily shot by my 13 year old daughter in NRL22 competitions. She doesn’t want the weight.
And honestly, having a weighted chassis versus have a weight that can be added or removed in seconds - I would pick the removable weight all day. Some times I throw it on the MPA or my Bergara. Most times it just rides in the gear box to the range. I have never run out of rail to not be able to run it with a bipod and/or a bag.
Last edited:
Lol. I had over 20k rds of 22 and sold all but about 4K rds. Got away from shooting 22. It was boring. Kept my SR22 only for the kids to shoot now and then. Well. I’m back into 22 shooting precision. I enjoy it a lot. I’m not regretting selling my 22. It was junk 22 that I wouldn’t be shooting out of my PRS rifle anyway. But now I’m stocking up on PRS ammo. And yes, I need more. Lol.
RimX with 26” Benchmark MTU prefit from TS Customs/Primal Rights.
Is your rifle resting on the Tripod or do you have it clamped in? My ball head won't fit with the side rails on.
I put the FX No-Limit rings on the Anschutz and got her zeroed in at 50 yards today. There was an occasional gust of wind. That's my best excuse and I'm sticking to it.
The No-Limit rings are meant for an air rifle but can be used on a rimfire as the recoil is negligible. Like I said I got the rifle zeroed at 50 yards but the rings are adjustable for elevation. This gives me an adjustment of over 25 MILs with my scope. If I add the extra 10 MILs of holdover the reticle gives me I can get out to about 525 yards.
Go ahead and laugh. I can dream; can't I?
Before the No-Limit rings, I had a 20 MOA rail and a set of Burris signature rings which gave me 60 MOA or about 17,8 MILs of elevation built into the optics set up. The No-Limit rings is a much simpler solution.
The No-Limit rings are meant for an air rifle but can be used on a rimfire as the recoil is negligible. Like I said I got the rifle zeroed at 50 yards but the rings are adjustable for elevation. This gives me an adjustment of over 25 MILs with my scope. If I add the extra 10 MILs of holdover the reticle gives me I can get out to about 525 yards.
Go ahead and laugh. I can dream; can't I?
Before the No-Limit rings, I had a 20 MOA rail and a set of Burris signature rings which gave me 60 MOA or about 17,8 MILs of elevation built into the optics set up. The No-Limit rings is a much simpler solution.
30mm Dovetail FX No Limit Adjustable Scope Mount | Pyramyd AIR
FX No Limit scope rings are just the thing for long-range shots. Vertically adjustable, they allow for a 4-meter shift at 100 meters. Get them at Pyramyd Air.
www.pyramydair.com
FX No Limit 30mm Weaver Scope Rings | Pyramyd AIR
Dial in your accuracy at longer ranges with the help of FX Airguns' No Limit Scope Rings. Learn more at PyramydAir.com.
www.pyramydair.com
Did another round of upgrades on the Tikka. Added an arca rail, 419 adapter, atlas cal bipod, got ride of the strike eagle in Leupold rings for a Cronus BTR in ARC rings.
I’ll zero it in the morning and see what I think about the scope.
I’ll zero it in the morning and see what I think about the scope.
Attachments
Last edited:
You like that one better than the anarchy outdoors handle? I had their original straight on like 2 years ago. Then l tried this AA one and really like it.
If you’re referring to mine, I have damn near Vudoo/rim-x money in it without the accuracy
.It’s a great shooting rifle, but if I’d known how far down the rabbit hole I was going, I would have just started with a Vudoo.
The barrel was the biggest waste of all (lw barrel). The factory barrel would stay in the .4’s with center x and Eley team and occasionally dip me down into in .2’s. The LW barrel shots a wider variety about the same but it didn’t tighten up with premium ammo at all really, just looks better.
Last edited:
Savage MKII FV-SR
Boyd's Pro Varmint Stock
Athlon Talos 4-16X40 Scope MIL Dot Reticle
Vortex 1" Pro Scope Rings (Med)
Diversified Innovative Products (DIP) MKII Tactical Trigger Guard/ Bottom Metal "E" Receiver "Deluxe Kit" For Wood Stocks
Diversified Innovative Products (DIP) FV-SR Muzzle Control Compensator
Harris 1A2-BRM Bipod 6-9 Inch
Armageddon Gear Squishy Rear Bag
Rattle Can Camo Paint job
Boyd's Pro Varmint Stock
Athlon Talos 4-16X40 Scope MIL Dot Reticle
Vortex 1" Pro Scope Rings (Med)
Diversified Innovative Products (DIP) MKII Tactical Trigger Guard/ Bottom Metal "E" Receiver "Deluxe Kit" For Wood Stocks
Diversified Innovative Products (DIP) FV-SR Muzzle Control Compensator
Harris 1A2-BRM Bipod 6-9 Inch
Armageddon Gear Squishy Rear Bag
Rattle Can Camo Paint job
Last edited:
I can't speak to the Anarchy Outdoors handle as I've never used it. But, the Sterk is incredible and was one of those "why did't I do this sooner" mods. I didn't really think I wanted or needed one. But I got to the point of running out of items to buy and hang off my T1X and there it was, just waiting for me to buy it and install it. Man, was I impressed.
Similar threads
