Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
Anschutz 1727F, CISM stock, NF ATCAR 7-35
Started with a lightweight Grey Birch La Chassis DLX for my KIDD Supergrade with 18inch lightweight fluted barrel. Swapped the barrel today to a 20inch SG heavy barrel. Comes in at 9.8lbs. I won't be lugging this in the woods for tree rats.
Swapped the NF out for the ZCO off my CF.
Just realized I haven't shared my little rimfire collection.
10/22:
Faxon Receiver (needs to be replaced because it's crap - probably going to get a Kidd)
Kidd 20" Bull Barrel
TandemKross V-Block
Kidd Bolt and Charging Handle
Ruger BX Trigger
MDT Oryx Chassis
MPA EVG Grip
XLR Bag Rider
Athlon Argos BTR 6-24x50
Burris XTR Rings
Accu-Tac FD-4 Bipod
Built this for fun as kind of a semi precision rimfire build. It shoots amazingly well with decent ammo and I might even try it out in some NRL matches.
CZ 457 Varmint MTR:
Area 419 30 MOA Scope Base
Area 419 Bolt Knob
Amazon Cheek Riser
Caldwell Cant Bipod
Bushnell Match Pro 6-24x50
Vortex Pro Low Rings
Pete's Pillars Re-Shaped Firing Pin
This is currently our NRL gun and have more upgrades coming for it. Trying to keep it in base class for a while. Will be adding the Area 419 Weight Tunable ARCA Rail with a Gray Ops CNC Bag/Barricade Stop and upgrading the Bipod.
AR22:
CMMG Bolt and 16.1" Barrel
BCM Foregrip
Holosun AEMS
Bore Buddy Reliability Kit
Assembled in a Stag Arms Upper and Handguard
Makes for some fun plinking with cheaper ammo and CQB training/practice
Vudoo 360:
Currently being built at Vudoo. Have the Three 60 action paired with a 24 inch 1.20 Straight Bartlein. Trigger Tech Diamond Single Stage and an MPA Matrix Pro or MDT ACC Chassis waiting (to see which I like better). This will be my NRL and PRS rifle.
10/22:
Faxon Receiver (needs to be replaced because it's crap - probably going to get a Kidd)
Kidd 20" Bull Barrel
TandemKross V-Block
Kidd Bolt and Charging Handle
Ruger BX Trigger
MDT Oryx Chassis
MPA EVG Grip
XLR Bag Rider
Athlon Argos BTR 6-24x50
Burris XTR Rings
Accu-Tac FD-4 Bipod
Built this for fun as kind of a semi precision rimfire build. It shoots amazingly well with decent ammo and I might even try it out in some NRL matches.
CZ 457 Varmint MTR:
Area 419 30 MOA Scope Base
Area 419 Bolt Knob
Amazon Cheek Riser
Caldwell Cant Bipod
Bushnell Match Pro 6-24x50
Vortex Pro Low Rings
Pete's Pillars Re-Shaped Firing Pin
This is currently our NRL gun and have more upgrades coming for it. Trying to keep it in base class for a while. Will be adding the Area 419 Weight Tunable ARCA Rail with a Gray Ops CNC Bag/Barricade Stop and upgrading the Bipod.
AR22:
CMMG Bolt and 16.1" Barrel
BCM Foregrip
Holosun AEMS
Bore Buddy Reliability Kit
Assembled in a Stag Arms Upper and Handguard
Makes for some fun plinking with cheaper ammo and CQB training/practice
Vudoo 360:
Currently being built at Vudoo. Have the Three 60 action paired with a 24 inch 1.20 Straight Bartlein. Trigger Tech Diamond Single Stage and an MPA Matrix Pro or MDT ACC Chassis waiting (to see which I like better). This will be my NRL and PRS rifle.
Last edited:
How does it shoot at 100yds? You built the rifle I have been wanting for the last year.
It shot ok, not as good as I expected ( of course it could not be my fault 
). I just was never as consistent as I expected it to be. I am in the process of changing it up again. New Bartlein 1”straight barrel, AI AT-X chassis, ZCO 527 mpct2x scope. Hopefully I January/ February I will get it out to the range to wring out the new build.
). I just was never as consistent as I expected it to be. I am in the process of changing it up again. New Bartlein 1”straight barrel, AI AT-X chassis, ZCO 527 mpct2x scope. Hopefully I January/ February I will get it out to the range to wring out the new build.
Just got back from the indoor range, took my Cooper Jackson Squirrel for some fun. 10 round group with Eley Club; a 25 shot "Tack Driving" game with CCI-SV...I have these targets for 25, 50 and 100 yards. Should have used Eley Club for the "tacks" the Cooper REALLY likes that ammo.
Vudoo 360 22” MTU
XLR Envy Pro
ZCO 5x27
TT Special two stage on the way
XLR Envy Pro
ZCO 5x27
TT Special two stage on the way
There are not a lot of 17HMR rifles in this thread so I figured I would post mine to encourage others to do the same. It is an accurate and super fun cartridge.
Took the Anschutz 1712 Silhouette to the indoor range after work. It doesn't like this Eley Club as much as my Cooper JSR, but still did ok. 25 yard ten round group and a "Tack Driving" target at the same distance.
See if these will work for you. One is for 50 and one for 25 yards
Took the Vudoo Three 60 to the indoor range today. Did an O.K. 10 round group with Lapua Long Range at 25 yards, just o.k. Did well with a good lot of SK Pistol Match on the Tack Driving target; 24/25.
25, 50 and 100 yard Tack Driving targets attached below.
25, 50 and 100 yard Tack Driving targets attached below.
Today was a trip to the indoor range with the Anschutz 1712AV. 25 yards for Tack Driving and flies; 50 feet for Fly Speck. Good times had by me. 3-9x scope definitely leaves me wanting moar powah!
Went to the indoor range with the Kimber 82B today, did some Tack Driving with my Son-in-Law...he beat me 24/25 to my 23/25.
Full KIDD Classic Slip Fit. Revolution Trailblazer stock in Brown Camo. Vortex Diamondback scope and rings.
Most recent photo of my ever changing Vudoo last weekend.
Last edited:
For some reason it didn’t load but it’s there now.But where are the pictures?
That looks sick. Is that a 1.2 Barrel from Vudoo (Bartlein or ACE) or a 1.25 from another barrel maker? Love the ACC Elite with the Baker wings
The barreled action was built by DI Precision and it is a 1.250 25” 1-13 twist a Mullerworks barrel with an EC Tuner V2.That looks sick. Is that a 1.2 Barrel from Vudoo (Bartlein or ACE) or a 1.25 from another barrel maker? Love the ACC Elite with the Baker wings
I designed a KYL Hostage target shooting game on another thread that might interest you and your son-in-law.
Free Printable To-Scale Targets
The attached target, rules and score sheet aren't necessarily to scale targets. If anyone is like me, they like the KYL targets. So I thought about combining the hostage target shooting game with KYL. The attachment has the target, the rules and a score sheet with pre-printed values to help...
www.snipershide.com
Here is the target but go to the thread to download the PDF file.
He’s running a Rim-X and those magazines are aluminum. I ran my Vudoo in a couple of Manners TCS’s with no issues running the factory Vudoo polymer magazines.
No you can’t run Rim-X magazines in a Vudoo. Yes both my Manners TCS’s had the mini-chassis bottom metal and worked fine with the Vudoo polymer magazines.
That stupid vendor told me that it would not fit good and I should wait till vudoo sells the new mags. I ended up buying a Jae stock rather than manners. I guess he wanted to keep the Manners for himself. Good news though I got the Jae for 1000 usd new from another person. Thanks for clarifying for me.
I said a couple of months ago that I had all the KIDD .22's I need. This came my way a couple of days ago, the price was right. Full KIDD Supergrade Premium including the KIDD modified Magpul X-22 stock and 2-stage trigger. I will NOT say this is my last .22.
Am I the first? Walked through LGS on Saturday found this, newer TALO edition. I needed a stock for the kid next door, had bought him a 10/22 target when he was 4. The SS model, with gray laminate stock, which I cut 2" off to fit the kid.
I wanted the stock back, and at 7 he has outgrown the chop job.
Not being an indigenous citizen giver, but I know the kid will trade even across for this spiderman issue. I may even try to do some scope trading at the same time, get the Leupold VX-III 1-5 power german reticle back in exchange for a dial turret, VX Patrol 1-4. Get him accustomed to not holding over.
Here we are getting setup one day for some steel ringing.
I wanted the stock back, and at 7 he has outgrown the chop job.
Not being an indigenous citizen giver, but I know the kid will trade even across for this spiderman issue. I may even try to do some scope trading at the same time, get the Leupold VX-III 1-5 power german reticle back in exchange for a dial turret, VX Patrol 1-4. Get him accustomed to not holding over.
Here we are getting setup one day for some steel ringing.
My new Rim-x build. 20" proof, MDT XRS, TriggerTech Diamond, Zeiss LRP S3 in ARC rings. I may look at getting my first suppressor for this. I have several boxes of ammo to try, just need to find the time now.
I put together a "Liberty Training Rifle" because I had some left over parts from my first 10/22.
The stock was a beat up pawn shop find, the receiver was a blem from S&P Outfitters, and the barrel came from Numrich.
The stock was a beat up pawn shop find, the receiver was a blem from S&P Outfitters, and the barrel came from Numrich.
Similar threads
