So this is not something I would do so asking for a friend. Say you have one of those Hoz and Shield cold bore caps for your RimX because it is supposed to keep the magic in. Then say your friend accidentally didn’t remove before flight and it went flying down range. I mean I know there is a hole in it for these sorts of things but could any damage happen to the barrel or action specifically? Please excuse damage to feelings and pride…. For my friend. Thank you.
Shooting off Cold Bore Cap
- Thread starter TubbyT223
- Start date
Won’t hurt anything.
FWIW, I have my bore cap tethered to my magazine plug with one of those key ratcheting tethers. A piece of Velcro on the side of the chassis and one in the tether keeps things in place. I took the ring off, and used a zip tie with some electrical tape to hold the core cap in place. Nearly impossible to forget to remove the bore cap.
KEY-BAK Ratch-It Retractable... https://www.amazon.com/dp/B073R5SMSV?ref=ppx_pop_mob_ap_share
FWIW, I have my bore cap tethered to my magazine plug with one of those key ratcheting tethers. A piece of Velcro on the side of the chassis and one in the tether keeps things in place. I took the ring off, and used a zip tie with some electrical tape to hold the core cap in place. Nearly impossible to forget to remove the bore cap.
KEY-BAK Ratch-It Retractable... https://www.amazon.com/dp/B073R5SMSV?ref=ppx_pop_mob_ap_share
Similar threads
Precision Rifle Gear
Tango Innovations FIRE4000 WMLRF Initial Impressions
