Show your new for 2014 AR!

Wes, your looks so familiar ;-)...

You make Unbeatable 5.56 builds IMO! I will post my 2014. Mama bought from you for me later! It is now mated with your lower and a tan ACS stock. (Upper with mk4 rail noveske 14.5 and mams.)
 
MSTN build: 14.5 noveske n4, mams brake, super match BCG with DB ionbond, vltor upper, vltor lower, vltor a5 with heavy buffer Magpul CTR stock, magpul grip, geissele sd3g trigger, Magpul sling, aimpoint t1 2 Moa with Alamo 4 star mount.

I likely missed something in the specs. It's all from memory.

Thanks for a great build Wes. Honorable mention to my awesome wife for this as a gift.
image.jpg
image.jpg
 

Attachments

  • image.jpg
    image.jpg
    1.5 MB · Views: 63
Last edited:


LMT MWS 16 CL

have a Anderson lower built up that's waiting on a 14.5 barrel and KAC RAS for a M4 clone that may hold me over until I get a tax stamp for a 10.5 and do a MK18 clone
 
i recently got an H&K MR 762. Initially had a Leupold Mk 6 1-6X (as shown in photo) but switched to a Vortex Viper PST FFP 4-16X50 scope.


Also added this fun gun 22lr clone of the STG 44 the GSG STG 44 and an LWRC LWRC M6A2 SPR


 
Last edited:
Sorry it's just a phone pic. Finished today, total frankenbuild.

Upper:
BCM blem
Seekins SP3R 15"
18" Black Hole rifle gas
Geissele SGB
Templar MC-E
Rainier BCG Micro Slick coated by MARS
Fortis Hammer

Lower:
Old DTI stripped lower I had laying around
Vltor A5 I had laying around w/ new B5 SOPMOD
Mega trigger I had laying around
BAD-ASS
Noveske endplate
The rest of the lower parts are pretty much crap I found in a drawer.

Scope is a cheap take-off from something else, I'll replace it with something a little better when I see how it shoots.
 

Attachments

  • pew pew machine.jpg
    pew pew machine.jpg
    652.5 KB · Views: 46
Last edited:
Not quite done yet, waiting on a bolt, trigger group and stock, but it's coming along well so far.

Mega ambi lower
Mega keymod carbine length upper
Larue A-PEG
Magpul AFG
Noveske 8.2" BO

Still waiting on:
LWRC UICW Ultra compact stock
Geissele SD-C trigger
Noveske KX-3 (until I can get a suppressor)
NiBO Bolt
Magpul MBUS
Aimpoint T1
Mega Billet CH




Anddddd.....here she is nearly complete. I opted for the LWRC UCIW stock over the NEA CCS, price and availability were a big factor. I'm pretty happy with my choice...cheekweld is pretty good, and probably much better than the NEA unit. It's a quality piece and I would recommend it. Now I'm just waiting on a CH and an RMR that's inbound. I'm going to see how well I like the RMR, and if I don't like it I'll look for a T-1.

 
Last edited:
I finished assembly of this yesterday - Wilson Combat Tactical 16" Fluted 1-9 Twist upper along with a WC Lower with
a WC TTU 3G trigger. Complete with Magpul ODG Furniture. Been thinking of the "right" glass as a next. Took me almost a
year to wait for all the parts etc. on this. I may have to toss some old iron sites on it and go see how it runs.

12289683953_544f42a9dd_z.jpg
 
props on the HK, that's a cool rig Sam.

Thanks for the compliment. Here is a target of the first 15 shots at 100 yards. The center target was my 100 yard zero target. The first 5 shoot group is on the right. The first 4 shots went into just 0ver 0.5 moa. I dropped the last shot. Buck fever I suppose. The last group on the left the 5 shoots went into just over 0.5 moa. I have 5 other 308 semi's and none come close to the HK. The only complaint I have is it could use a better trigger. If it keeps shooting like this I will put a Geissele trigger in but it cost over $400 so I will just see if I can get use to the trigger.
 

Attachments

  • IMG_0158.jpg
    IMG_0158.jpg
    1.4 MB · Views: 43
Just finished last week. Still haven't put a round through it.

I've been collecting pieces for a while. I registered the pistol lower about 6 years ago and it's been sitting in my safe since. Picked up a RRA 2 stage a couple years ago, etc... Saw a picture of the SB 15 and that put the rush on the project. Bought the KAK buffer tube to properly space the "arm brace". Found the AA 7.5" pistons on sale about 6 weeks ago and ordered one up. Here is the finished pistol...

 
That is a BADASS AR you got there sir! If you don't mind can you share the weight of that setup? Also, where did you find the Sale on that AA Piston Upper? I am thinking of the same build in the future too, would love some Range Reports on the accuracy and reliablility of that setup! Thanks a lot!

HOG.

Just finished last week. Still haven't put a round through it.

I've been collecting pieces for a while. I registered the pistol lower about 6 years ago and it's been sitting in my safe since. Picked up a RRA 2 stage a couple years ago, etc... Saw a picture of the SB 15 and that put the rush on the project. Bought the KAK buffer tube to properly space the "arm brace". Found the AA 7.5" pistons on sale about 6 weeks ago and ordered one up. Here is the finished pistol...

 
Spartan Precision Rifles AR-10 in 308, Larue 20 MOA mount, Bushnell 3.5-21 ERS HDMR H-59, JEC level and target location device. I asked Marc to add the folding stock to the build which he was game for. The only thing I am waiting on is the new PSR Atlas bipod from Kasey, so in the mean time I have a Harris on it. I'll take it out to zero here soon but I am confident that I will be happy with it's performance as the workmanship and attention to detail is superb. Build details are as follows:

Spartan Precision Rifles | AR308


DPMS pattern

Specs:
-SI Defense matched receiver set
-Magpul PRS (Precision Rifle Stock)
-Geiselle Hi-Speed DMR trigger
-Umbrella Corporation grip
-Badger Tac Latch
-Ambidexturous Safety
-Centurion Arms CMR 14″ hand guard
-Kreiger 22″ barrel with 11.25 twist chambered in .308 Winchester
-One 20rd Magpul Pmag


2rqhdao.jpg


t8pyrb.jpg


2r3io1t.jpg


2nght1s.jpg
 
Dpms lower, White oak a2 upper with pinned rear sight, Shilen barrel, Stallings microsight, JP front sight adj gas block, .052 front post, hogue aluminum grip, Yhm quad rail, Geissele natl match trigger, JP buffer.

Need to add weights to it, otherwise its match ready.

 
IMG_3439.JPG


IMG_3440.JPG


Custom Noveske 16" 1x8 three groove stainless barrel with KAC intermediate length gas system and Syrac adjustable gas block, Ionbond Diamondblack ("D/B") coated, with polished & contoured feed ramps, plus Surefire Legacy FA556AR suppressor. LMT proof round tested, MP-inspected bolt, fitted at 1.4646", Young MFG National Match full auto forged, then centerless ground, then hard chromed full auto bolt carrier with LMT internals, with everything Ionbond Diamondblack coated down to the gas rings. Vltor MUR, MSTN-marked, with forward assist. PRI Gas Buster charging handle. Geissele Mk 4 forend. New Nightforce 2.5-10x42 NXS with Zero-Stop, MOAR reticle, ED glass, side focus, red & green illumination, etc., in Larue mount. Aimpoint T-1 in 45 degree offset Larue mount. Vltor A5 lower with A1 buffer, Geissele NM trigger, plus SPR grip and Magpul STR stock. Larue modified Harris bipod.
 
IMG_3443.JPG


IMG_3444.JPG


IMG_3432.JPG


Noveske 8.2" SS .300 BLK barrel with polished & contoured feed ramps, with Troy Claymore on the muzzle. LMT proof round tested, MP-inspected bolt, fitted at 1.4666", plus LMT internals, all D/B coated. NEA Compact Carbine stock kit with proprietary bolt carrier. Larue Stealth upper receiver (no longer in production). PRI Gas Buster charging handle. KAC URX forend. Aimpoint T-1 in Larue mount.

The lower is a personal SBR (ten years old) with Geissele SSA trigger and SPR grip.
 
Last edited:
MSTN build: 14.5 noveske n4, mams brake, super match BCG with DB ionbond, vltor upper, vltor lower, vltor a5 with heavy buffer Magpul CTR stock, magpul grip, geissele sd3g trigger, Magpul sling, aimpoint t1 2 Moa with Alamo 4 star mount.

I likely missed something in the specs. It's all from memory.

Thanks for a great build Wes. Honorable mention to my awesome wife for this as a gift.
View attachment 28195
View attachment 28197

YOU are one lucky man!
 
How do you like that NEA stock

Sent from my GT-P5210 using Tapatalk

Can't really say yet. It arrived just after lunch, and I excitedly added it to my own 8.2" .300 BLK V-SBR. I have not had the opportunity to shoot the weapon so reconfigured.

It's compact, that's for sure, and extremely well made, as it should be for the cost. The shooting position is nowhere near as comfortable as a good M4 stock, but that's the price one pays for such compactness. I have to say I just like the way it looks.
 
Picked up one of the Colt LE6920s with the factory FDE upper and lower, stripped off all the magpul goodies and added my flavor of Vltor, MOE+, and a Geissele Mk2 rail. Found the aimpoint FDE covers online too for the aimpoint Pro, thing shoots as nice as it looks!
edit - thats all the factory oil on it... I took it out of the box and modded it up.
 

Attachments

  • IMG_1378-1.JPG
    IMG_1378-1.JPG
    1.2 MB · Views: 40
Last edited:
I think I'm going to swap out the grip for a standard A2, and still need to get it dialed in, but here's the latest latest for 2014.

DPMS heavy wall low pro / side charging upper
Krieger 26" 1:7.7 223 wylde
Milspec bolt carrier, headspaced bolt
WOA handguard & hand stop
PNW Rear sight w/ Gehmann 510 iris
Stallings Rightsight w/ 2.9-4.9 iris & .5 lens
Geissele HS Match trigger
WOA LH stock

Upper built by Lee Wells.

e9ck.png
 
Just finished this one last night.

Parts list:
Noveske Gen 2 billet lower
Vltor Mur/Noveske billet upper
LMT full auto bolt and bolt carrier
Daniel Defense LPK
Geiselle SD-E flat trigger
BAD-ASS Ambi safety setup
Seekins billet mag release
Noveske SS 14.5" barrel 1:7 twist
Noveske NSR 13.5" keymod rail/handgaurd
Magpul STR stock
Magpul MOE grip
LMT extension tube
Spikes ST-T2 buffer
Tubb flat wire buffer spring

I have a Vortex PST 1-4 optic and a ADM mount I still have to put on it today, as well as some KAC micro BUIS.

62FF92E8-7015-4FFA-991B-7EA1BE2DEF6A.png

51AE85A5-2295-4BE5-9AE8-FEA888978283.png

AC260FA7-177D-4817-9935-562FC838FF7F.png

B7AF4366-3925-4DDB-82DE-204F0FE66580.png

FAB72072-D7A5-47CD-A9EC-19D40A2BB867_1.png
 
Been piecing this together since mid last year. Got it finished in January. Was going to go with forged receivers but Dad got me the Seekins billet upper for Christmas so i just had to put it on a billet Seekins lower.


• Upper
o Seekins billet receiver
o Gem State Armory bolt carrier group
o AXTS Raptor charging handle
o Rainer Arms Ultramatch barrel .223 Wylde chamber 10.5” 1:8
o Head Down Provectus 9” rail hand guard (clearance from Primary Arms with i could find a 15" for another build)
o Seekins adjustable gas block (probably change to a YHM clamp on eventually)
o Stainless carbine length gas tube
o Levang compensator
o Magpul MBUS flip up sights
o Magpul XTM hand stop piece
• Lower
o Seekins SP223 billet receiver
o Carbine buffer tube milled down
o Molded rubber buffer tube cover (1” I.D. exercise equipment handle off ebay)
o Noveske QD end plate
o ALG defense combat trigger & hammer
o DPMS take down pins
o DPMS detents & springs
o KNS .155” nonrotational trigger & hammer pins
o Seekins enhanced bolt catch
o Magpul K2 grip
 
BCM lower with Geissele Super Tricon trigger, BCM B5 SOPMOD Bravo stock, BCM Mod 2 grip, VLTOR A5 RE kit/Sprinco chrome silicon green coded buffer spring, IWC QD receiver end plate. BCM Standard 14.5" Mid Length (ENHANCED Light Weight-*FLUTED*) Upper Receiver Group w/ BCM KMR 13" Handguard, latest generation LMT enhanced BC with BCM bolt and NiB-X Bolt Cam Pin. Raptor ambi CH , Magpul Pro rear sight, DD latest gen serrated face front sight, KAC MAMS, Surefire X300 ULTRA with Unity Tactical mount/guard, Magpul RSA sling mount, waiting on the BCM FDE keymod rail covers. Aimpoint T-1 on a GDI QD mount. Custom BFG Vickers FDE padded sling with a Magpul MS1 sling slider assembly, a Magpul Paraclip on the front and a MS1™ MS3-QD™ Adapter on the rear, for a single point option. I prefer to use the stocks right side QD mount. The triggers pull weight and break are just perfect and I actually prefer the BCM stocks cheek weld over my IMOD's. A Cerakote finish something like this from http://redcreektactical.com/images/314_RCT_Light_Tactical_3.jpg might be in its future. Even with the add-ons, it is still a very lightweight and well balanced carbine.

 
Last edited:
Palmeto State upper and lower , 1-7 twist 16"
Noveske Switchblock
Melonited FA bolt group
Custom brake
12" once one piece quad rail
Mission First Tactical Minimalist stock
UCWRG Grip 23 pistol grip (love this thing)
Vortex Strikefire Optic (very impressed for the money)
Trusty Surefire 951 light with updated Cree LED lamp

I put this together for my dad who has had the AR itch for a while , he is still in the air about what BUIS he wants.
 

Attachments

  • PSA1.jpg
    PSA1.jpg
    620.3 KB · Views: 41
  • PSA2.jpg
    PSA2.jpg
    584.3 KB · Views: 41
eseny6up.jpg

Lone Wolf Dist lower
5" 9mm upper waiting for the tax stamp for an AAC Suppressor


ypuzeves.jpg

Smith lower
Noveske 8.2" upper in 300 Blk
Waiting for a tax stamp for a Templar Ark30. Holding me over is a Thunderbeast 30BA
 
- 16 Inch Larue Tactical OBR with match barrel 7.62
- Magpul CTR Mil-Spec Stock
- Night Force 3.5-15 x 50 F1 NXS MLR2.0
- SPUHR: 30mm Cantilever Mount 6MIL/20.6MOA - 1.46"
- Leupold Deltapoint 7.5 moa
- Extended Bolt Release v2 .308
- Accu-Shot Mono Pod with LaRue Tactical POD (Prone Optimization Device)
- Harris Bipod BRM-S and LT706 QD Swivel Mount Combo
- Vtac Sling (Viking Tactics)
- 762-SDN-6 Fast-attach 7.62mm silencer with 51T Flash Hiderimage.jpgimage.jpg
 
.308 showed up :)

AD4F317B-9190-41F6-B10C-014FE1697A91.jpg


Built on a Remington R25 Reciever set.

Bartlein barrel, 1-10 twist, M110 contour. 20", threaded 5/8x24 with thread protector
JP .936 adjustable gas block
Magpul PRS
Ergo deluxe grip
CMC trigger
Omega free float fore end
2 20rnd mags
Burnt Bronze cerakote
Chambered for 175 smk
Bravo company Gunfighter charging handle.

Also finished my 300 blk build

A480D1DD-BD32-4E07-AE9D-E37DE891E427.jpg


Cmmg 8.5" complete upper
Black Rain billet lower
Magpul/noveske ambi 60 deg safety
Troy cqb grip
KAK sb25 buffer tube
Sig Forearm Brace
 
Alright-She is completed!
Spikes Upper/Lower
AXTS Raptor CH
Magpul UBR, MOE +, trigger guard, BAD lever, BAD ASS Safety
Timney 3lb Skeletonized trigger
KNS Pins
SAA NiBX BCG
SLR Rifleworks 15" Solo Keymod Rail
Wilson Arms 18" stainless barrel (bead blasted)
Seekins Adjustable Gas Block (ordering a SLR)
SWR SpecWar suppressor (in jail)/mount
Harris Bipod/Larue Mount
Primary Arms 1-6 ACSS scope. (Waiting on a Larue mount)



 
Here is my new toy.

Upper:

Aero Precision upper
18" DPMS Mk 12 barrel
Midwest Industries free-float tube
YHM flip up front sight/gas block
YHM flash hider
Badger tac latch

Lower:

Aero Precision/Surplus Arms lower
Timney trigger
DPMS LPK
Mag-Pul ACS stock

Topped off with the Primary Arms 4-14X44 FFP scope. I have named this rifle the "Poor Man's Mk12". So far it shoots both the 50gr VMAX and the 69gr SMK very well. It really likes IMR 4895 with both bullets.
 

Attachments

  • photo2.JPG
    photo2.JPG
    119.3 KB · Views: 34
  • MK 12 Group 2-24-14.jpg
    MK 12 Group 2-24-14.jpg
    126.4 KB · Views: 33
7.62 Larue Tactical PredatOBR

This is my new 14.5" tOBR wearing a field grade barrel. I did a barrel/handguard swap with another guy and went from my 16" FG rifle and ended up with a 14.5. The match barrel will be a 16.1" once it's delivered so I will have both barrel lengths!
 

Attachments

  • image.jpg
    image.jpg
    845.6 KB · Views: 39
- Complete Novekse 18" SPR upper w/ Nsr 13.5in rail
- PWS FSC556 muzzle brake
- Seekens Precision lower
- Seekins Precision bolt catch, mag release and trigger guard
- Core 15 lpk
- Geiselle SSA-E trigger
- Magpul fixed carbine stock
- Magpul Miad 1.1 grip
- Vortex Viper pst 2.5-10x32 scope
- American Defense MFG. Recon x scope mount
- Harris 6-9 HBRMS bipod
 
<a href="http://s269.photobucket.com/user/cwa11is_2008/media/2014-03-04%2006.19.21_zpsg3dbqxly.jpg.html" target="_blank"><img src="http://i269.photobucket.com/albums/jj43/cwa11is_2008/2014-03-04%2006.19.21_zpsg3dbqxly.jpg" border="0" alt=" photo 2014-03-04 06.19.21_zpsg3dbqxly.jpg"/></a>

<a href="http://s269.photobucket.com/user/cwa11is_2008/media/2014-03-04%2006.23.04_zpsljrreosh.jpg.html" target="_blank"><img src="http://i269.photobucket.com/albums/jj43/cwa11is_2008/2014-03-04%2006.23.04_zpsljrreosh.jpg" border="0" alt=" photo 2014-03-04 06.23.04_zpsljrreosh.jpg"/></a>

Maten ambi upper and lower set

Fulton Armory bcg

Fulton Armoury 18.5" rifle length gas tube 1x10 barrel

SWS E1 15" handgaurd

JP brake

Geissle SSA trigger

MOE stock

MBUS PRO sights

BCM Gunfighter charging handle

Hogue grip/w battery holder

I still need glass. Thinking about an IOR Hide version.
 
image (1).jpg

Built off of a Black Rain Ordnance FALLOUT-10 receiver set, my new 308 AR. I have a magpul PRS 7.62 stock on the back, a MOE+ grip and a DPMS 308 LPK for now on the lower. The upper includes a VLTOR BCM gunfighter mod 3 charging handle, a DPMS 308 bolt carrier, a JP enterprises enhanced stainless bolt, JP cryogenic super match 18" stainless steel barrel with their small type compensator on the front. The gas system is mid length with a JP adjustable gas block and the handguard is a Troy alpha TRX extreme with a full coating of squid grips. Finally, I have a Harris bipod underneath. Hell of a build, and it was super fun to put together. Upgrades are going to include a scope (looking at vortex viper), a cmctriggers flat bow 3.5, the JP rifle length silent capture buffer, and an ambi safety selector