Show your new for 2014 AR!

Finally got my stamp and all my parts together to get this puppy rigged up.

Here are the parts:

Daniel Defense factory lower with factory parts and an MOE stock
DD upper
DD Lite rail II 7"
Noveske 8.2" 300 blackout lo pro barrel
Silencerco Saker 7.62 Trifecta flash hider
WMD full auto nib-x bcg
BCM Mod 4 charging handle
Larue index clips
Aimpoint H-1 4 moa in Larue tall mount
Mapgul AFG forward grip

I'll have the suppressor for it at some point, it'll be a Silencerco 7.62 Saker

It all went together pretty easy. The upper and lower fit is nice and tight. Overall I'm pretty pleased with it.







 
Sold my first bushmaster i got on a trade deal to build my first one.... here she is. Shes an absolute tac driver.

LAR Ops-4 Ambi Upper
Seekins SP223 Gen2 Billet lower
Timney Single Stage Match Trigger
KNS Gen 2 Antiroll trigger pins
Hogue Grip
Palmetto lower parts kit
A2 Tube and buffer
PRS Stock
Seekins SP3R 15" handguard
Shilen 24" 1:9 Match barrel w/ bolt .204
Double Star low profile gas block
Yankee Hill gas tube
Seekins mag button
Seeking 5 slot rail section x2
Lower wedge
Lancer L5 20rnd Mags

Vortex Viper PST 6-24x50 FFP
AD recon 20moa mount
DD 1' offset mount
Burris Fastfire ii
Atlas Bipod
Atlas Monopod





 
  • Like
Reactions: AMGtuned
The Wolf Cub, Just finished building it a couple of weeks ago
WolfCub009_zps9458ded5.jpg


It's still evolving
 
Awesome looking rifle! How does it shoot?

I'd be bragging if I told you! Noveske Rifle Work's 1x8 three groove barrels are the most accurate they make. This barrel was made for the 77 SMK!

What's even better is how "shootable" a rifle like this can be. It has just enough weight and magnification to do well prone or off the bench. But, you can really get into some surprisingly compromised positions and still get good POA/POI results. Slap an Aimpoint T-1 on it in a Larue 45 degree mount and you can hose close-up targets like a madman, too.
 
A couple of new .300 BLK SBRs built to the customer's specifications:

IMG_3907.JPG


Pair of 14.5" Noveske N4 barreled blasters with TIG P&W muzzle devices (Giving you a 16+" barrel length) sporting KMR forends:

IMG_3909.JPG


Same idea but with Geissele KeyMod equipped Mk 4 forends:

IMG_3805.JPG


I even have a similar upper with one of the earlier, now discontinued Geissele Mk 4 handguards in their "sand" color left:

IMG_3253.JPG
 
As a mechanic I come across scrap metal on a daily basis. I give it all away to my guys on my team so they can make extra money. Well I decided to keep it and see how long it would take to piece meal an AR together.

3.5 months!!

Used 14.5" barrel was free from a good buddy.
Phase 5 upper $80
PSA stripped lower $50
PSA BCG $80
blackhawk LPK from a buddy for $25
MOE stock with tube buffer spring from a buddy for $30
I had some bushmaster M4 hand guards, Worked over GI trigger with JP springs, charging handle and a RRA carry handle from years ago.
 

Attachments

  • IMG_0770.JPG
    IMG_0770.JPG
    285.7 KB · Views: 44
So much awesomeness rolled into one post!

a couple of new .300 blk sbrs built to the customer's specifications:

img_3907.jpg


pair of 14.5" noveske n4 barreled blasters with tig p&w muzzle devices (giving you a 16+" barrel length) sporting kmr forends:

img_3909.jpg


same idea but with geissele keymod equipped mk 4 forends:

img_3805.jpg


i even have a similar upper with one of the earlier, now discontinued geissele mk 4 handguards in their "sand" color left:

img_3253.jpg
 
wow . alot of nice builds here . mines pretty boring until you pull the trigger . 50 cal beowulf with mag-pul furniture , pepper pot muzzle brake and mtd recoil pad.
 
Colt LE 6920 M4 lower
Geisele SSA-E Trigger
Bushnell AR/223 scope 4.5-18x40mm
Caldwell swivel bipod
WOA 18" varmint Fluted upper 1 in 7" twist
556/223
Custom Turret System (turret labels)

Target is 5 shots at 100 yards. and others as small as 3/8".
 

Attachments

  • WOA BARREL END .JPG
    WOA BARREL END .JPG
    557.2 KB · Views: 42
  • custom turrets .jpg
    custom turrets .jpg
    27.6 KB · Views: 45
  • 5 shots 65 gr.7:16%22  .JPG
    5 shots 65 gr.7:16%22 .JPG
    78.3 KB · Views: 37
  • new upper .JPG
    new upper .JPG
    260.1 KB · Views: 47
Last edited:
IMG_3912.JPG


Noveske SS barrel, D/B coated
MSTN BCG, D/B coated
PRI Gas Buster
Vltor MUR, MSTN-marked
DD MK 18 RIS II
SF MB556

Designed to be shot suppressed all the time. That's why a brake is used, to serve as a first blast baffle and increase suppressor life. There's an SLR adjustable gas block lurking under the forend.
 
Just about got the build for my eight year old done. Just waiting on the rear sight. Once she gets good with irons, I'll find a decent 3-9 scope for deer hunting.



My brother engraved their names on the lowers with his CNC mill for all 4 of my daughters. This one will go right along with the pink one her 11yo sis has. Now just need two more uppers for when the next two get old enough.
 
Not the greatest pics but here goes.

Bravo company usa upper
Spikes tactical lower
Daniel defense bcg
Daniel defense lower parts kit
Raptor charging handle
bravo company usa 11.5" barrel + bcm lo pro gas block
phantom flash hider
midwest industries 10.5" ssk keymod rail
phase 5 hex 2 buffer tube
h2 buffer
magpul moe k2 grip
sig sb15 brace

I still have to put some backup sights and it's getting an eotech xps-2 opmod from my other rifle


 
YHM Upper, Lower and 1/2" Riser
RRA LPK with RRA 2 Stage Trigger (breaks like a thin glass rod)
WOA 16" 1:7 Match Wylde with Rainier Stainless gas block and DPMS mid length gas tube
BCM BCG
Troy 13" Alpha Rail
YHM QD Flash Suppressor
MagPul UBR, BUIS
Ergo Grip
Harris Bipod
Weaver Grand Slam 3 x 10 Mil/Mil 1/10th MR
Burris X-Treme Rings

10.7lbs bipod, attached, optics mounted and a full magazine inserted ready to fire...

Rust-O-Leum Camouflage rattle can with Sea Sponge with two coats of clear matte
Going to the range tomorrow...

45146d1407025827-show-your-new-2014-ar-dmr1small.jpg
 

Attachments

  • St JAMES small.jpg
    St JAMES small.jpg
    289.9 KB · Views: 38
  • DMR1small.jpg
    DMR1small.jpg
    530.2 KB · Views: 38
  • DMR3small.jpg
    DMR3small.jpg
    512 KB · Views: 36
Last edited:
And another 2014'er...this ones a Pistol...

Spikes Upper and Punisher Lower
YHM Diamond 9" FF
YHM QD Flash Suppressor
8.5" SS Barrel
Simplistic Shooting Solutions Blast Shield, (screws right onto the YHM QD Flash Suppressor)
Ergo Grip
Mil Spec receiver extention
Thordsen CAA Adapter
SpringCo Springs
RRA LPK
BCM BCG
CAA Saddle
MagPul BUIS
SureFire 951 with tape switch and ARMS 22 mount
AimPoint Comp ML2 and QRP Mount


ITS A PISTOL TOO...legal to carry in car or truck LOADED, heads at 100 and torsos at 200 are child's play...building a duplicate upper in 300BLK in OD will have OD mags, 556 is FDE with FDE mags. pretty sure it'll be legal to hunt deer with too...


45154d1407026301-show-your-new-2014-ar-pdw-finish-4.jpg


45153d1407026278-show-your-new-2014-ar-pdw-finish-1.jpg
 

Attachments

  • PDW FINISH 1.jpg
    PDW FINISH 1.jpg
    130.1 KB · Views: 39
  • PDW FINISH 4.jpg
    PDW FINISH 4.jpg
    162.3 KB · Views: 51
  • PDW FINISH 6.jpg
    PDW FINISH 6.jpg
    177 KB · Views: 40
Last edited:
29d9rvc.jpg


Just got her done last night. Rock river arms upper/lower
Geissele ssa-e
Jp silent capture spring and enhanced bolt
Magpul stock and buis
Seekins 15" Mcsr v2
Ergo grip
 
IMG_4007.JPG


Noveske 14.5" N4 barrel, with feed ramps polished and contoured
Ionbond Diamondblack coated BCG, with LMT proof round tested, MP-inspected bolt, D/B coated down to the gas rings, fitted exactly in the middle of the headspace spectrum (1.4666") for best reliability with mil spec ammo
Vltor forged MUR with MSTN logo laser etched
Knight's URX 3.1 forend
Vltor/BCM Gunfighter charging handle
MSTN QC Brake pinned and welded to give a 16.1" barrel

All four going to the same guy! He probably shoots more 5.56mm rounds annually than anyone.
 
First Build

Here is my recently completed build, my first but not my last!









Wilson Combat matched receiver set
Wilson Combat internals, BCG, and barrel
Ergo Tactical Deluxe Grip
Ergo F93 Pro
Wilson Combat adjustable gas block
Midwest Industries 15" SSK Handguard
Noveske NSR panels
JP Enterprises tactical compensator
Hiperfire 24E Trigger
ADM Recon 30mm mount
Bushnell AR Optics 1-4x24 PCL
Magpul BUIS
 
Last edited:
Here is my recently completed build, my first but not my last!



Wilson Combat matched receiver set
Wilson Combat internals, BCG, and barrel
Ergo Tactical Deluxe Grip
Ergo F93 Pro
Wilson Combat adjustable gas block
Midwest Industries 15" SSK Handguard
Noveske NSR panels
JP Enterprises tactical compensator
Hiperfire 24E Trigger
ADM Recon 30mm mount
Bushnell AR Optics 1-4x24 PCL
Magpul BUIS

Great build!

What case is that?

Thanks!
 
Hello here is my new AR build for this year so far ......My version of the M16 A5


Upper is the Bravo Company 20 inch Gov profile , it has the BCM BCG and BCM large latch charging handle , It has the Billet Style lower from Noveske , Bad Ass Ambi safety , Geissele SSA-E trigger , Vltor Emod A5 stock and buffer kit , KAC Ras 5 Rail system , Nightforce FC3 1-4 optic with Bobro mount , Hogue grip, LaRue Fug , LaRue QD bipod mount with Harris bipod with pod lock . The light is the Surefire 952v Tan Cerakoted Black I will be putting the Surefire Socom Brake on it to use my Surefire Socom RC suppressor with it . I am also going to be going with the V Tactical OD 2 point sling and Ontario Knife OKC3S Marine Bayonet .


 
Here's my ar
223wylde stoner barrel
adams arms piston system
magpul stock
Fortis rail
gunfighter charging handle
Hogue grip
bad lever
Blackrain upper/lower billet
eotech/vortex mag
Gun is extremely accurate almost want to put a scope on it. Target was shot of the back of my truck bed with sand bag and some xm855 ammo at 100y
20140822_173620.jpg20140822_173654.jpg
 
<a href="http://s1290.photobucket.com/user/usnavy06/media/Rifles/ar_zps656a1610.jpg.html" target="_blank"><img src="http://i1290.photobucket.com/albums/b537/usnavy06/Rifles/ar_zps656a1610.jpg" border="0" alt="Colt AR photo ar_zps656a1610.jpg"/></a>

Nothing fancy, Started life as a Colt Match target Replaced the furniture with magpul put a troy 13" rail on it and the barrel is a 16" rainier arms ultra match. Mount is a American Defense recon