-
Having trouble using the site?
Contact support
Show your new for 2014 AR!
- Thread starter bcw1284
- Start date
DPMS SASS with some JP Rifle Swagger
Put together a nice steel plinker. I like the DPMS value, but added a different ERGO grip, JP Rifle FF foreend, chopped and recrowned barrel to 16" with Surefire muzzle break. It is what it is and works for me plinking steel out to 500 yards so far, not comparing to the upper end AR10's but Im happy with it.
Put together a nice steel plinker. I like the DPMS value, but added a different ERGO grip, JP Rifle FF foreend, chopped and recrowned barrel to 16" with Surefire muzzle break. It is what it is and works for me plinking steel out to 500 yards so far, not comparing to the upper end AR10's but Im happy with it.
Attachments
What do you think of the NEA stock? I've only heard one review and it wasn't good (poor machining, fit, and finish)
some good looking builds on here. Can't wait to get back from Afghanistan and start putting my Lr-308 together!
How's the Upper/Lower Fit and finish on yours? why the new trigger? I thought the factory 2 Stage Trigger was pretty Darn Good!
Well the upper is newly built. DD receiver, WOA 18" SPR rifle length, 1:7, Ranier Match lo pro gas block, Troy Alpha 13", DD BCG, Gunfighter medium CH. The lower is an LMT I already had, but I did install a Geissele DMR in it just for this upper build.
Last edited:
I updated the 7.62 to mimic my Noveske 5.56 (ergonomics). I was extremely surprised with weight reduction. 2014 is being kind to me so far.
BCM Keymod
BCM Charging Handle
BCM Mod 2 Grip
BCM Muzzle Brake
Rattle canned this one Aervoe Field Drab (coyote).
BCM Keymod
BCM Charging Handle
BCM Mod 2 Grip
BCM Muzzle Brake
Rattle canned this one Aervoe Field Drab (coyote).
.22 Plinker and 5.56 carbine
BCM lower with Geissele Super Tricon trigger, BCM B5 SOPMOD Bravo stock, BCM Mod 2 grip, VLTOR A5 RE kit/Sprinco chrome silicon green coded buffer spring, IWC QD receiver end plate. BCM Standard 14.5" Mid Length (ENHANCED Light Weight-*FLUTED*) Upper Receiver Group w/ BCM KMR 13" Handguard, latest generation LMT NP3 coated enhanced BC with BCM bolt and NiB-X Bolt Cam Pin. Raptor ambi CH, Magpul Pro rear sight, Colt small spool FP, Colt castle nut, DD latest gen serrated face front sight, KAC MAMS, Surefire X300 ULTRA with Unity Tactical mount/guard, Magpul RSA sling mount, waiting on the BCM FDE keymod rail covers. Aimpoint T-1 on a GDI QD mount. Custom BFG Vickers FDE padded sling with a Magpul MS1 sling slider assembly (super smooth adjustment with no creep), a Magpul Paraclip on the front (I can manipulate it easier/faster than a push button QD swivel when its cold out and with gloves on) and and a MS1™ MS3-QD™ Adapter on the rear, for a single point option. I prefer to use the stocks right side QD mount. The triggers pull weight and break is perfect and I actually prefer the BCM stocks slightly smaller shelf/cheek weld over the IMOD's when using a RDS. A Cerakote finish something like this from http://redcreektactical.com/images/314_RCT_Light_Tactical_3.jpg might be in its future. Even with the add-ons, it is still a very lightweight and well balanced carbine.
BCM lower with Geissele Super Tricon trigger, BCM B5 SOPMOD Bravo stock, BCM Mod 2 grip, VLTOR A5 RE kit/Sprinco chrome silicon green coded buffer spring, IWC QD receiver end plate. BCM Standard 14.5" Mid Length (ENHANCED Light Weight-*FLUTED*) Upper Receiver Group w/ BCM KMR 13" Handguard, latest generation LMT NP3 coated enhanced BC with BCM bolt and NiB-X Bolt Cam Pin. Raptor ambi CH, Magpul Pro rear sight, Colt small spool FP, Colt castle nut, DD latest gen serrated face front sight, KAC MAMS, Surefire X300 ULTRA with Unity Tactical mount/guard, Magpul RSA sling mount, waiting on the BCM FDE keymod rail covers. Aimpoint T-1 on a GDI QD mount. Custom BFG Vickers FDE padded sling with a Magpul MS1 sling slider assembly (super smooth adjustment with no creep), a Magpul Paraclip on the front (I can manipulate it easier/faster than a push button QD swivel when its cold out and with gloves on) and and a MS1™ MS3-QD™ Adapter on the rear, for a single point option. I prefer to use the stocks right side QD mount. The triggers pull weight and break is perfect and I actually prefer the BCM stocks slightly smaller shelf/cheek weld over the IMOD's when using a RDS. A Cerakote finish something like this from http://redcreektactical.com/images/314_RCT_Light_Tactical_3.jpg might be in its future. Even with the add-ons, it is still a very lightweight and well balanced carbine.
Last edited:
Finally got mine put together enough to put a few rounds down range....enough to adjust the gas block and such. Just waiting to get a some nice glass to put on top.
Mega billet upper/lower
RA Ultramatch 16"
JP enhanced bolt in a Kies Firearms NiB carrier
Seekins MCSR rail
Spikes enhanced LPK
MFT Battlelink stock
PWS enhanced buffer tube w/ Tubbs flatwire spring
Kies adjustable gas block
A friend just got 33 acres in central TX. Waiting to go down to help get the hog population under control.
Mega billet upper/lower
RA Ultramatch 16"
JP enhanced bolt in a Kies Firearms NiB carrier
Seekins MCSR rail
Spikes enhanced LPK
MFT Battlelink stock
PWS enhanced buffer tube w/ Tubbs flatwire spring
Kies adjustable gas block
A friend just got 33 acres in central TX. Waiting to go down to help get the hog population under control.
Attachments
Oldschool A2
I'm working my way backward to the basics….. a straight-up, nothing fancy, A-2. She ain't purdy, but she's fun on a Saturday night. I just built this one today on a Spikes Tactical Upper w/16" 1:7 twist barrel and mid-length gas system. I've got a matching Spikes lower in the works as soon as the LPK arrives. In the meantime I used the Double Star lower that I had sitting in my safe waiting on SBR approval. Soon as this damn weather warms up, I'll take it out and break it in.
I'm working my way backward to the basics….. a straight-up, nothing fancy, A-2. She ain't purdy, but she's fun on a Saturday night. I just built this one today on a Spikes Tactical Upper w/16" 1:7 twist barrel and mid-length gas system. I've got a matching Spikes lower in the works as soon as the LPK arrives. In the meantime I used the Double Star lower that I had sitting in my safe waiting on SBR approval. Soon as this damn weather warms up, I'll take it out and break it in.
I've been working on other platforms for my own stuff this year so far. But I have been putting together rifles for my four daughters. My oldest who is 11 has had her rifle for a couple years now and has already bagged a nice buck with it. It is the top one in the picture. I had my brother engrave their names in them with his VMC. They now are sitting as complete lowers waiting for me to scrounge the parts for the uppers.
My 264LBC/6.5 Grendel is finally DONE.
The picture does not include the Harris bipod and some camo form to wrap the scope and make it match the rifle, which are both now installed, but you get the idea. And the brake is timed now, pic was taken before it was shimmed and timed.
The Goodies:
Desert Digital Camo hydro-graphic printing throughout by my friends @ Galley Graphics
Rainier arms ultramatch upper
PSA Lower
Magpul PRS Stock in FDE
ERGO Palm-shelf grip in FDE
MOE Trigger guard in FDE
KNS anti-walk pins in FDE
Timney competition trigger
Midwest Extended Rifle length handguard in FDE
Midwest .936 low profile extended gas block
YHM melonited gas tube
BHW custom twist, stainless steel, polygonal rifled barrel, 24" heavy bull profile chambered in .264LBC
BHW hand fitted/paired MPI bolt to the barrel/extension/chamber
LMT Bolt carrier, pins
SAS muzzle brake for Arbiter TOMB suppressor
Nightforce ultralight 30mm 20MOA uni-mount
Vortex Viper PST 6-24x50 MIL-MIL FFP Scope
Midwest Bipod adapter
Harris 9-13 LMS Bipod (not pictured)
The picture does not include the Harris bipod and some camo form to wrap the scope and make it match the rifle, which are both now installed, but you get the idea. And the brake is timed now, pic was taken before it was shimmed and timed.
The Goodies:
Desert Digital Camo hydro-graphic printing throughout by my friends @ Galley Graphics
Rainier arms ultramatch upper
PSA Lower
Magpul PRS Stock in FDE
ERGO Palm-shelf grip in FDE
MOE Trigger guard in FDE
KNS anti-walk pins in FDE
Timney competition trigger
Midwest Extended Rifle length handguard in FDE
Midwest .936 low profile extended gas block
YHM melonited gas tube
BHW custom twist, stainless steel, polygonal rifled barrel, 24" heavy bull profile chambered in .264LBC
BHW hand fitted/paired MPI bolt to the barrel/extension/chamber
LMT Bolt carrier, pins
SAS muzzle brake for Arbiter TOMB suppressor
Nightforce ultralight 30mm 20MOA uni-mount
Vortex Viper PST 6-24x50 MIL-MIL FFP Scope
Midwest Bipod adapter
Harris 9-13 LMS Bipod (not pictured)
New custom Noveske SS with KAC length gas system and Syrac adjustable gas block hiding inside the new BCM KMR:
New custom Noveske SS with KAC length gas system and Syrac adjustable gas block hiding inside the new BCM KMR:
Like it. What do you have for scope caps?
This is my first AR, I got the lower back in 2013 but it got finished in 2014.
Seekins Precision billet receiver set. (registered SBR lower)
Spikes 7.5' barrel
Seekins MCSR rail
Noveske flaming pig
BCM charging handle
Battle Arms safety
Magpul stock and grip
and a few other add on's I am forgetting.
Seekins Precision billet receiver set. (registered SBR lower)
Spikes 7.5' barrel
Seekins MCSR rail
Noveske flaming pig
BCM charging handle
Battle Arms safety
Magpul stock and grip
and a few other add on's I am forgetting.
Last edited:
I have both (see above). I wanna say the BCM KMR is slightly narrower. I can attempt to measure them tonight.
Tack Driver
Here's a real tack driver... .271 MOA
And the group to prove it
just kidding
Here's a real tack driver... .271 MOA
And the group to prove it
just kidding
Last edited:
Noveske Stripped Upper and Lower, Noveske NSR15, Rainer Arms 18" UltraMatch .223 Wylde SPR barrel, Rainer Arms Match BCG, Rainer Arms Raptor Charging Handle, Geisele SSA, PWS FSC, BCM A1 Stock Kit, Troy BUIS, Seekins Precision Adjustable Gas Block, Spikes LPK, Aimpoint T1 (swapping out when my S&B arrives), ect.
Sent from my iPhone using Tapatalk
The rifle isn't new for 2014, but the Syrac gas block, Surefire flash hider, Alamo Four Star mount, Leupold Mark 6, and paint job are..
6.5 grendel 2 years in the making.
Detroit gun works receiver set
22" bartlein barrel
.936 pri adjustable low profile gas block
LBC national match bolt carrier
YHM rail
Magpul PRS
Geissele SSA-E
Burris P.E.P.R. mount
Night force 5.5-22x56 MOAR reticle
6.8 spc yhm
Detroit gun works receiver set
22" bartlein barrel
.936 pri adjustable low profile gas block
LBC national match bolt carrier
YHM rail
Magpul PRS
Geissele SSA-E
Burris P.E.P.R. mount
Night force 5.5-22x56 MOAR reticle
6.8 spc yhm
I was going to post this in the Sniper's Hide build thread but couldn't find it, so I guess this is just as good a place as any... Finally (almost) finished this build based on the matched receiver sets from JD Machine from a few years back! It will soon have a 2.5-10X on top.
JD Machine matched SH receiver set
Geissele SSA-E Trigger
CLE Douglas SPR 18" 1:8 Barrel Rifle length gas system
Seekins SP3R 15" Keymod handguard
Troy Folding Battlesights
Magpul ACS Stock
SPR Pistol Grip
Harris Bipod attatched via OdinWorks K-Pod bipod adapter
JD Machine matched SH receiver set
Geissele SSA-E Trigger
CLE Douglas SPR 18" 1:8 Barrel Rifle length gas system
Seekins SP3R 15" Keymod handguard
Troy Folding Battlesights
Magpul ACS Stock
SPR Pistol Grip
Harris Bipod attatched via OdinWorks K-Pod bipod adapter
Finished this a couple of months ago. PWS mod 1 lower
IMOD stock
SSA trigger
Ambi safety
BAD lever
BCM 14.5" upper
PWS FS556 brake
Troy delta rail cut down to fit the 14.5 barrel
Tango Down stubby qd grip
T1
Shoots great, nice and light too at 7lbs even.
Lancer Outlaw with some custom mods.
17" Krieger 1-7.7 twist
Syrac gas block
Seekins Brake
JP LMOS
Silent Captured Spring
Hyperfire 24C trigger
USO SRC 1-8 with custom 3-Gun reticle
Nightforce Ultralight Unimount
She's a shooter!
5 shots @ 100 yards, not bad for a 8x scope!
That is one sweet build you got there...wow!!
Show your new for 2014 AR!
My 3 gun AR
Noveske afghan barrel
13.5" nsr
Spikes receiver
Nickle boron "Fail zero bolt"
KAC lpr lower
Hands down best 14.5" setup ive ever touched. The afghan barrels cant be matched by anyone else's 14.5 barrels in my opinion.
Sent from my iPhone using Tapatalk
My 3 gun AR
Noveske afghan barrel
13.5" nsr
Spikes receiver
Nickle boron "Fail zero bolt"
KAC lpr lower
Hands down best 14.5" setup ive ever touched. The afghan barrels cant be matched by anyone else's 14.5 barrels in my opinion.
Sent from my iPhone using Tapatalk
Last edited:
Nothing as good as what you guys are posting, Colt with 16'' barrel. Knights rail and surefire light & an Aimpoint.
Hard to get good AR accessories hear. My bolt guns are better.
[/URL[URL=http://s1283.photobucket.com/user/Aceshigh338/media/03bd1fc0-c250-489d-a95c-60f706f55a10_zps7dc86582.jpg.html]
Hard to get good AR accessories hear. My bolt guns are better.
[/URL[URL=http://s1283.photobucket.com/user/Aceshigh338/media/03bd1fc0-c250-489d-a95c-60f706f55a10_zps7dc86582.jpg.html]
Just Finished this one up Yesterday after my Stamp arrived! 10.5" 6.8 SPC built from a mix of used and Blem parts. Just about everything on this rifle was bought used, or repurposed from annother build at one point in time. Eventually I want to shave the FSB and add a 9" rail but that will come as funds allow.
<a href="http://s237.photobucket.com/user/MPD142/media/68SBR_zpsd56de50b.jpg.html" target="_blank"><img src="http://i237.photobucket.com/albums/ff243/MPD142/68SBR_zpsd56de50b.jpg" border="0" alt=" photo 68SBR_zpsd56de50b.jpg"/></a>
This one I picked up about a month ago. Been wanting a .308 AR platform rifle for awhile now and I was starting to outgrow the 16" Noveske barreled 6.8 I built so this is the replacement. Still waiting on my scope to arrive.
<a href="http://s237.photobucket.com/user/MPD142/media/LMT%20LM8/LMTLM8_zpsf8f7b4eb.jpg.html" target="_blank"><img src="http://i237.photobucket.com/albums/ff243/MPD142/LMT%20LM8/LMTLM8_zpsf8f7b4eb.jpg" border="0" alt=" photo LMTLM8_zpsf8f7b4eb.jpg"/></a>
<a href="http://s237.photobucket.com/user/MPD142/media/68SBR_zpsd56de50b.jpg.html" target="_blank"><img src="http://i237.photobucket.com/albums/ff243/MPD142/68SBR_zpsd56de50b.jpg" border="0" alt=" photo 68SBR_zpsd56de50b.jpg"/></a>
This one I picked up about a month ago. Been wanting a .308 AR platform rifle for awhile now and I was starting to outgrow the 16" Noveske barreled 6.8 I built so this is the replacement. Still waiting on my scope to arrive.
<a href="http://s237.photobucket.com/user/MPD142/media/LMT%20LM8/LMTLM8_zpsf8f7b4eb.jpg.html" target="_blank"><img src="http://i237.photobucket.com/albums/ff243/MPD142/LMT%20LM8/LMTLM8_zpsf8f7b4eb.jpg" border="0" alt=" photo LMTLM8_zpsf8f7b4eb.jpg"/></a>
Thought this one made it in here....
Just finished at the begenning of this year:
MA-10 .308 by wareagle700, on Flickr
Atlas V8 on MA-10 .308 by wareagle700, on Flickr
DSC_7639 by wareagle700, on Flickr
Just finished at the begenning of this year:
MA-10 .308 by wareagle700, on FlickrAtlas V8 on MA-10 .308 by wareagle700, on FlickrDSC_7639 by wareagle700, on Flickr
iowahbars1 by Armed Ferret, on Flickr
Bought the lowers (OEF-15 on the FDE, Aero Ghost Gun on the Lothar-Walther) in Iowa, my home state, and then built them as MD-compliant "HBAR" profile full rifles so I could bring them back.
Here's the OEF-15 wearing my just-approved YHM Phantom 7.62:
IMG_1097 by Armed Ferret, on Flickr
Range day tomorrow to play with the can, and shoot some targets for Round 4 of the challenge.
(the OEF-15 is getting a PST 2.5-10 in a month or so; the strikefire/magnifier was to make it a shorter-range compliment to the 6-24 on the LW rifle)
-Mega Matched Upper/Lower
-Bartlein 1-7.7 medium contour chambered 5.56 NATO
-JP Enhanced Bolt
-JP Silent Capture
-Lancer 12.5" Handguard
-SLR Rifleworks Ti Gas Block
-AR Gold out of a Pretobr
-Magpul CTR/ MOE
-Surefire 7.62 Can
-Vortex Razor HD Gen II 1-6x24
-Larue SPR Mount
Build on a CMT receiver set, Mega 16" barrel, 14" Fortis Switch Rail, Bushnell DMR in a SPR-S mount. Now if the ATF would just hurry up with the paperwork for my 7.62RC.
