The AR15 Picture Thread

[Trigger Monkey]

I’ve had good results with the AAC 77gr precision ammo.

It was pretty meh in those two rifles today, at 100 it was .90" in the Mock 12 and 1.08" in the SPRecce, not great not terrible. It was stupid slow though, 2485 in the Mock 12 and 2400 in the SPRecce, I was kinda hoping for some more velocity out of it and the ES and SD's were not awe inspiring either.

 

[Sigmanx]

It was pretty meh in those two rifles today, at 100 it was .90" in the Mock 12 and 1.08" in the SPRecce, not great not terrible. It was stupid slow though, 2485 in the Mock 12 and 2400 in the SPRecce, I was kinda hoping for some more velocity out of it and the ES and SD's were not awe inspiring either.

I did this at 200 yards in mine. The 5th round above was all me as I had to makes a slight adjustment and accidentally sent it. The middle hole of the 3 is 2 rounds. Haven’t checked velocity in it though and I may do that next time as these looked a little low compared to where they should be.

 

[Bcamos]

I’m just pretending to be a photographer.

 

[Parabellum6]

This has been my favorite rifle for several years now. Absolute workhorse of a gun and more than capable enough.

KAC SR15 Mod 2 14.5
SOCOM 2
M300 Turbo
Good ol' Harris in a Badger LPHM
RRS Arca mount
Geissele 1.5 Mount
1MOA RMR in a 45 Degree Reptilia Mount
MK6 3-18 Tremor3
CTR with Larue RISR

 

[WI2017]

Finally got around to purchasing a LA-5 UHP to finish the 416 clone.

HK-416 Upper
STS Lower
Geissele 416 Handguard
HK-416 OTB BCG
Geissele 416 Trigger
Brownells 14.5” Barrel/Gas Block
Surefire RC2 SOCOM
Leupold CQBSS
LA-5C

 

[Trigger Monkey]

 

[Tex68w]

This old girl has been around in one form or another since 2011. She's hefty at 10.5lbs without a mag but still has a place in my quiver. Currently sits with a little bit of old and a little bit of new. 13.9" barrel courtesy of D. Wilson.

 

[03RN]

Same rifle but with new suppressor. Sounds like a 22lr

 

[nikonNUT]

Bit the bullet and decided to give the 22ARC a try for a new yote and hog gun. Got in on an APF group buy at the LGS and grabbed APF DMR 2.0. Being me I had to go with a weird ass color, Blood Orange! Added a few bits that the factory parts lacked like a TT Diamond 2-stage, Radian Talon (The factory abomination is 90 degree and two inches long.) , and a DFCO Kung Fu grip and took it for it's first spin last weekend. Quite the shooter and the adjustable gas block they "forgot" to install arrived today so tomorrow is tuning and a little more tweaking on the zero.

 

[Bcamos]

Little photo sesh with the 14.5

350yds off the tank trap with a little bit of wind was no problem for my wife.

 

[FrozenMinnesotan]

Got my 20" yesterday. Shoots decent with 73gr eldm and adi 69gr smk. Looking forward to testing more ammo. 400 yards with win x193 was stupid easy.

 

[VargmatII]

Started on a new test today, the Element Optics HYPR-7, zeroed and ready for more.

Coming on www.skytteguiden.com eventually (Swedish)

 

[nikonNUT]

Took a buncha spares and a cheapie rifle and built a spare/loaner after dark critter gitter...

 

[NaciremaToirtap]

Here's another 16" 6mmARC built on a V seven receiver set with Proof carbon fiber 16" barrel, JP FMOS bolt carrier group, TriggerTech Diamond trigger (set to 1.75 LB), BCM MK 2 recoil system, and just about every titanium parts V seven makes. Just 6 LB 3 OZ - and capable of 1000 yard hits.

View attachment 8625132View attachment 8625134View attachment 8625135View attachment 8625136View attachment 8625137View attachment 8625138

V7 is so awesome. Love their stuff

 

[charnicus]

 

[Necessary 3vil]

 

[Obi-WanKannoli]

Really pleased with how this 11.5 do-all is evolving. Thinking about having the barrel dimpled and swapping the can out for a B&T Print XH to drop weight out of the front end.

 

[Tex68w]

Latest version of the 14.5" 6 ARC. I hope this will be the last optic swap for a while. Currently torn between the Magpul MOE SL-S stock pictured below or going back to the B5 Collapsible Precision Stock.

 

[Bcamos]

Really pleased with how this 11.5 do-all is evolving. Thinking about having the barrel dimpled and swapping the can out for a B&T Print XH to drop weight out of the front end.

View attachment 8647084

I still need to see some more detailed information to see if there's any merit to this or not (though it does make sense), but I've been reading that dimpling barrels that have already been finished can dramatically weaken them. I know fluting has been a thing for a long time but I'd venture to guess that it's been on barrels with a much lower demand than a short AR. I think they look fantastic so I hope that's not the case as I've heavily considered it for my 14.5" rifle.

 

[eyekahn]

16"

 

[Stickman]