Hello !
wo can tell me the correct torque specs for the tac A1 or knows where I can find them...?
thnxs
Chris
wo can tell me the correct torque specs for the tac A1 or knows where I can find them...?
thnxs
Chris
62 inch pounds is factory spec for metal trigger guards
This is the PDF manual.
It's close to the end around Pg. 114 or so....
Last edited:
Thanks´s.
It is M05 camo pattern, Finnish military pattern.
It is cerakoted my Ceramet in Finland.
Did some base coats with several colora to change the background from black and have tonal variations. The did some sponge on top of that. Finally a very light diffuse spray of green to knock the sponged colors back and some sponged highlights on top of that. Lots of layers. Still need to clear coat.
The Bungee Sling
<p>The Bungee Sling designed after years of research and field development done exclusively at Rifles Only. Input from competitive shooters, snipers from law enforcement and military, and shooting instructors has led to an innovative design that accommoda
www.riflesonly.com
HopticUSA
www.hopticusa.com
KRG Whiskey X-Ray and Bravo | hoptic
KRG Saddle BlanketsFits: Whiskey 3 or X-Ray and BravoThe Bravo edition has a shape and cut that is compatible with many other Stocks and Chassis!1/8" Polethylene Padded Cheek Rest AppliqueLaser cut for a perfict form fit.Each Purchase includes two Saddle Blankets$14.99
www.hopticusa.com
You could make your own for $3 or less. Go to the hobby store and purchase the stick on padding in the thickness you want. Trace, cut, stick... done.
Amazon.com: Black Self-Stick Adhesive 10" x 10" EVA High Density Foam Sheets (5 Pack) 3mm by Strong Back Crafts- for Canoe & Kayak Seats & Traction Pads, Dog Traction for Cars, Scrapbooking: Arts, Crafts & Sewing
Shop Strong Back Crafts at the Amazon Arts, Crafts & Sewing store. Free Shipping on eligible items. Save on everyday low prices.
www.amazon.com
My two Tikkas:
7mm Rem Mag, pillar bedded with a ss recoil lug (I know there's no recoil pad in that picture, it has one now) topped with a vortex viper HS-T
6.5 CM in a KRG Bravo, topped with a Viper PS-T gen ii and a highland canyon brake
I love these Tikkas! As long as I do my part, they shoot so well.
7mm Rem Mag, pillar bedded with a ss recoil lug (I know there's no recoil pad in that picture, it has one now) topped with a vortex viper HS-T
6.5 CM in a KRG Bravo, topped with a Viper PS-T gen ii and a highland canyon brake
I love these Tikkas! As long as I do my part, they shoot so well.
My KRG bravo just came in the mail today.. I'm waiting on a yodave trigger spring, do I need to remove the whole action again to install the spring? No idea when the spring will be here and I'm anxious to mount this new chassis up
Yes. You most likely won't be able to install the spring with it inside the action.
Thanks, dont know how long it'll be before I get the spring but I agree.. it's going in the new chassis tonight lolYeah, you'll have to remove the action from the chassis to replace the spring, but it's really easy to do, so I wouldn't wait to put it in there just because of that, if it were me
DO remember to tighter that trigger back to action with enough force, and when you do change the trigger, do check that safety does work and do the safety test, cock the action and do a small dropping test.
Bounce the buttbad to the floor with small amount of power and check that the trigger is not fired.
If it does do so, you must tighten the trigger tension.
I would recon you to look this video, since you do not know that you are doing.
Thanks much, definitely going to check this video out!
No problem, just want to keep you in safe road.
If your Tikka is new, remember that it does not have warranty after that trigger spring change.
But so i did too, straight i got my new Tikka, i started modified it
Thanks for the help guys, got the bravo all mounted up. Thinking about doing a aluminium trigger guard and mag release.. Just trying to find a damn atlas cal for sale here.. and I'll be set for a while.
What "AICS" type magazine (not CTR) are you using with your Tikka 223 in a KRG Bravo stock? I just put mine together and with a MDT plastic 223 mag - the mag does not fit tight enough. Before I start adjusting the Bravo forearm or trigger guard - wanted to get feedback.
This is in 6.5 creedmoor with ctr mag if this was in reference to my picture
Tikka T3X Varmint- 6.5 Creedmoor
Oregon Mountain Rifle Co. Factory Carbon Barrel upgrade/bolt fluting/Cerakote
Leupold Mark 5 HD 3.6-18 TMR
Hawkins Precision 35mm low rings
Spuhr 20 MOA rail
Mesa Precision Altitude stock
RedSnake Tactical DBM
Sterk Titanium bolt handle/shroud
Tier One Tactical Bipod
Area 419 bipod rail
Elay Precision trigger spring
Oregon Mountain Rifle Co. Factory Carbon Barrel upgrade/bolt fluting/Cerakote
Leupold Mark 5 HD 3.6-18 TMR
Hawkins Precision 35mm low rings
Spuhr 20 MOA rail
Mesa Precision Altitude stock
RedSnake Tactical DBM
Sterk Titanium bolt handle/shroud
Tier One Tactical Bipod
Area 419 bipod rail
Elay Precision trigger spring
Spoke with KRG and the MDT 223 mag is good to go. I will adjust the stock
It’s getting so close. Bartlein barrel due in a few weeks.
Nice setup! I’m running the superlite and a SWFA 3-9 hd for the coming season. Can’t wait
Really wanted the superlite but the Locked and Loaded SS Lite deal was too good to pass up. At some point I’ll get a carbon barrel on there.
Last edited:
Nice build! How do you like that stock? I looked into them for my tikkas but ended up going with Iota and JCS
Gave stock painting another shot on my 7mm mag, I really like this sponge painting!
I’m happy with the stock. I went with Mesa Precision because it was one of the lighter weight options (mine was dead-on 29 oz), and I like the size of the grip. It’s made by AG Composites and then inletted and finished by Mesa, so I was confident that it would be a solid product given AG’s good reputation. Initial impressions did not disappoint.
Pulled my 16.5” 260 CTR from EH1A into TAC chassis. Haven’t shot it yet in current configuration, but so far I love it. May carakote it down the road.
DMR II-i in Nightforce 20 moa mount
Similar threads
