Thanks! Just reached them on Instagram....they say the website should be back up Wednesday.As far as I know, this is how I see their stuff now. Didn’t know their website was down.
Next Shot Precision (@nextshotprecision) • Instagram photos and videos
3,970 Followers, 2,833 Following, 216 Posts - See Instagram photos and videos from Next Shot Precision (@nextshotprecision)www.instagram.com
-
Having trouble using the site?
Contact support
I have one of these bolt bodiesI hesitate to post this as I don’t want to set you into buyer’s remorse convulsions, but…
Tikka T3 Bolt Body — PRPrecision - tikka bottom metal
Couple Tikka’s single action length with the increase in pre-fit and factory take-off barrels on the market today, aftermarket bolt bodies have been the final missing link to full, switch barrel capability on the Tikka platform. My T3 bolt bodies are CNC machined from 4340 and Nitrided for excellenwww.prprecisionrifles.com
As the below link suggests, Unknown Munitions might be making them soon as well, with BAT Machine as the OEM.
Tikka Bolts
This might be a stupid question but why hasn't someone come out with aftermarket Tikka bolts? Either ones you can change the bolt face on or just full bolt replacements? I'm gearing up to a do a new build and I'd really like to try a Tikka. I'd like to set one up for 6mm but with the ability...rokslide.com
But I get it if you can get other components way cheaper. It adds up.
Works great
Paul is a great gunsmith as well. Done a number of projects for me now and is always high quality work.
T3 superlight in 7-08 and a MPI stock is only 4 oz heavier than my Barrett Fieldcraft in 6.5 Creedmoor with the same scope.
hmmmmm
hmmmmm
Last edited:
I know a lot of people really want light rifles, but I don’t. Give me a 15 lb rifle and accessories and I am happy. Less recoil, less recoil effect, better accuracy, dependability. But that’s why there are options to exercise, it takes all kinds to make the world go round. I won’t be hiking hundreds of miles into the wild, so a little weight on my shoulder won’t hurt a thing. I would rather save the weight in my pack than with my rifle.
maybe if walking 20 yards from a truck to a box blind but on a backcoountry or spot n stalk hunt no way in hell am i carrying an extra 6 lbs in my rifle. you just gotta practice more if you can't shoot a 9 lb rifle at hunting distances.
I can. I can also carry an extra 6 lbs for 20 or 30 miles without much of a problem. I am also 70. If you are much younger and can’t handle 6 lbs well, dayum.
I can easily pare 6 lbs from a pack. I think I said something about that earlier. Taking a pack implies more than 20 yds lol.
But hey. As I said, it’s all about personal choices. I expressed my preferences. 6 lbs is nothing. I much prefer the behavior of my rifle with the 6 than without. That’s my reason. I recognized in my previous post that many prefer a lighter rifle. Is my choice, for me, wrong? No.
I never said yours was wrong for you. As far as I meant, I didn’t imply yours was wrong for you either.
*shrugs*
Hahahahahaha so funny!
I appreciate your concern for my health and well being. Hahaha
This is my pack as I prepare for a trip next month into the Appalachians in NC. Thankfully, I can take my time and have no time constraints. 6 lbs is next to nothing lol. Not my first rodeo bubba. I am guessing you have never carried 80 lbs of gear day in day out. So, yeah, maybe for you 6 lbs is intimidating.
Last edited:
So, how ‘bout that Tikka T3, huh guys…?
I love mine. I pier bedded it and added weight to the forend and I am very happy with the stability and balance. Handles and shoots like a dream and it will likely be my last rifle. I added a cheek riser as my most recent improvement.
Superb for a lot of uses. I just wish I had known of Tikkas much earlier.
The way things are going it may be an asshat removal device in the future LOL
I have a couple of teen grand boys whom I plan to leave my knife collection and guns to. I just hope they appreciate them as I have the memories I have of my grand parents.
6lbs in a 80lbs pack is 7.5% of its total weight.
Or, in a 74lbs pack, adding 6lbs to 80lbs is adding 8.1% more weight.
Gets worse as the packout gets lighter, of course.
Adding 6lbs to a 40lbs pack adds 15% more pounds (46lbs total). Heck, some entire mountain rifles are around 6lbs.
You sound like a tough guy. When I was 29, I remember getting beat by a few 70+ yr olds in a 32 mile xc ski race.
You must be one of those bastards lol.
It may not matter much to you, but realize to mere mortals the above percentages are significant.
Age will catch up to all of us (if we don’t die first).
Whelp, the closer you get, the closer you are. Last year was going to be my last major camping trip. I think I can handle one more. Hell, I got more than 6 lbs of fat on me. If you weigh 200 and you carry 50 in a pack and Rifle, 6 lbs is 2.4% of the total weight. In calculus one way to describe it is “as X approaches zero” lol
6 lbs is only a problem if you dwell on it, otherwise it’s the 50 lbs that the problem LOL
I don’t know about a tough guy, but I am a nut. I am a shell of the former me, and I think that is who I compete with.
I really love spending time out in the woods, alone. That is what really matters.
Last edited:
Yeah, but the problem with that calc is the 50lbs pack can’t carry itself. It just laughs the whole way at the other 200lbs haha
So, with a lighter gun one could’ve had a 44lbs pack, but with that heavier rifle one carries an extra 13.6%.
But hey, I get wanting to use the rifle you’re comfy with. That might make the difference between bagging something or not.
Totally agree. I’m in my mid-fifties, and I hope I’ll still be as active as you are when I get up there.
Heck, I’ll probably be dead by then
Aaannd here’s a (problematic-light-strikes) Tikka Super Varmint in .223 for the thread! Shortly going back to Tikka for the second time!
I died when I was 62. Didn’t think I would see 65. Feel better now than I did at 61. You just never know.Yeah, but the problem with that calc is the 50lbs pack can’t carry itself. It just laughs the whole way at the other 200lbs haha
So, with a lighter gun one could’ve had a 44lbs pack, but with that heavier rifle one carries an extra 13.6%.
But hey, I get wanting to use the rifle you’re comfy with. That might make the difference between bagging something or not.
Totally agree. I’m in my mid-fifties, and I hope I’ll still be as active as you are when I get up there.
Heck, I’ll probably be dead by then
I liked the 50# laughing at the 200# LOL love it!
I maintain that not focusing on the 6 makes it all a bit lighter lol focus on the woods! Sit frequently and enjoy!
I also carry a handgun but that, too, is non-negotiable
It’s spiritual. Or can be. It is for me. It is worth everything. I guess that is why I return, even though I didn’t think I would.
That sucks! I have the same model in .308. Mine shoots beautifully. With 155gr Scenars every load I tested printed <1MOA. The good loads prints half that.
Witt Machine makes a custom clamp on muzzle brake that I’m hoping will tame my lightweight 7mm Mag.
https://wittmachine.net/
https://wittmachine.net/
Sorry for the Tikka related question but...
I understand that a Tikka 'LA' has the different bolt stop allowing more travel and no spacers in the magazines.
I also understand there are atleast 5 different length magazines (spacers) (223=?, 308=2.82, 270wsm =2.9, 6.5PRC = 3.074, 300WM =3.34). Maybe there are more.
Now my question are there also 5 or more different bolt stops? Or do the 270WSM magazines and PRC magazines run the short bolt stop?
I understand that a Tikka 'LA' has the different bolt stop allowing more travel and no spacers in the magazines.
I also understand there are atleast 5 different length magazines (spacers) (223=?, 308=2.82, 270wsm =2.9, 6.5PRC = 3.074, 300WM =3.34). Maybe there are more.
Now my question are there also 5 or more different bolt stops? Or do the 270WSM magazines and PRC magazines run the short bolt stop?
Shot the 7Mag off the bench with the witt brake. Easily 30 - 40% reduction in recoil. Now more like my lightweight 308, which is great.
10 shots to confirm POI, shoulder still works, so there is that. Rifle doesn’t jump around under recoil any more either.
Loud, but I wear ear pro when I hunt anyway (in the ear noise cancelling).
10 shots to confirm POI, shoulder still works, so there is that. Rifle doesn’t jump around under recoil any more either.
Loud, but I wear ear pro when I hunt anyway (in the ear noise cancelling).
Thanks for the update on the brake. I am going to grab one of those. I like the looks and the design is similar to ones I have used before
i've only seen short and long bolt stops.
wsm should be short bolt stop, prc should be long bolt stop.
check out the various receivers here and they say bolt face, internal mag length, and bolt stop length
Tikka Actions -
Tikka Actions. Many variations available. Stainless steel & chromoly blued. Readily available, find your Tikka T3x action at J&A Outdoors Today!
jaoutdoors.com
Last edited:
Ok found it:
Tikka Bolt Stop Adjustable | HVHA
Our adjustable Tikka Bolt Stops fit both the Tikka T3 and Tikka T3x, our Bolt Stops allow loading of cartridges with long Case overall lengths
highvelocityhuntingaustralia.com.au
I think the lite stop in 308 or 6.5 bolt face is either ctr or long. I'm guessing more ctr. That post was meant to show there aren't 5.
Should likely have been labeled long as magnum length, ctr as normal, short as 223.
My 6.5 creed t3x lite
SV .243
@ 100yds
Learning to reload
@ 100yds
Learning to reload
Last edited:
This is what I get for being on straight nights for 2 months. Looking at it with a rested mind, makes far more sense as it is.
I am struggling with this decision myself.(Do I get the Origin that Rem700 compatible and allows for swappable bolt faces or do I get a prefab like a Tikka T3X) I am completely new to bolt action rifles (never shot one before) By default I always like things that are custom built because normally you can get higher quality parts and sometimes cheaper on par with prefab. But at the same time If it is not necessary to go full custom like that starting out then I am open to other options. I have been struggling with this decision for almost a week now haha. I am down a rabbit hole doing countless hours of research and comparing everything. What all do you use your Tikka for? Have you been able to get it sub MOA?
Tikka's are great factory rifles, I really like mine, but I won't pretend they are the same as a custom. Depends what you want to do and how much you want to spend? Mine will shoot very small groups with Lapua brass, VV powder, Federal primers and Berger bullets YMMV, easily sub MOA.
The two Tikka’s I own have been 5-shot sub-MOA out of the box with good factory ammo.
I own/have owned a couple AI’s, an older R700 varmint, four CZ 527, two Bergara Premiers, and a pre-64 Mod 70.
The Tikka’s bolt throw is easily as smooth and effortless as any of those, and maybe has even less friction. It’s eerie.
Paragraph thoughts edited after rereading: Tikka’s bolt lift is a little heavier than my Bergara Premiers (not the cheaper B14!) or my slightly worked over R700. But, it’s still pretty darn nice…and bolt close is very low effort. The AI is way heavier open & close (I don’t mind).
Now, the lift not like what I’ve heard a Lone Peak or similar is like (near effortless) but that 70° bolt throw has got me hooked. Buy a Sterk bolt handle and it feels like an AI!
You can buy prefits for both an origin and Tikka. You can buy Tikka compatible bolts now.
KRG is reworking their excellently-reviewed two-stage Midas trigger. People say that the Tikka trigger design is less prone to fouling than the R700 pattern…I have no opinion. Changing a Tikka trigger is screw-out, screw in affair (no R700 punch pins). Single stage Tikka triggers become awesome with a $10 spring.
The bolt stop pin can fail on a Tikka, I guess.
As mainly a small caliber guy (223/204) I’ve found the Tikka CTR mags totally rock compared to AICS. Much shorter and I don’t have to mod them for 204 optimization. I’ve heard 6br feeds from Tikka mags no problem (can’t remember if that’s reg mags, CTR, or both).
Tikka/Beretta’s CS can be spotty, I read. They sure don’t push the platform on us as much as they should.
The Tikka action is a little lighter and more svelte than the R700, is that matters one way or the other. I like it.
If you want a Tikka CTR KRG Whiskey 3 chassis, buy a Bravo CTR chassis and then buy their TRG rear-end (in their TRG section only, oddly). The Bravo is such a great chassis.
Full disclosure: I’ve had issues with one of my Tikka’s having light strikes, but I buy many of my guns at my LGS and they are having their local Tikka rep step in and solve it. But I’ve had problems with guns from other brands too.
I’m still stunned that the Finns out out such a gun at the price they do. It’s amazing.
W3 cheekpiece on a CTR Bravo.
I think you need to feel the rifles first, ideally.
Last edited:
Agreed. I was shooting my TAC A1 today and the action does surprise me with how smooth it is(about 1000 rounds through it). The Sterk bolt handle is a must, a nice easy upgrade. Nice looking gun in the Bravo
Calling it my cheap TRG22 haha.Agreed. I was shooting my TAC A1 today and the action does surprise me with how smooth it is(about 1000 rounds through it). The Sterk bolt handle is a must, a nice easy upgrade. Nice looking gun in the Bravo
I also have the similar-ish Anarchy bolt handle/round knob for it and cannot believe how much more I prefer the Sterk! @cannoncrossfire is a genius.
Sadly, today I must attend a darn high school graduation. No shooting for me
I was getting a TRG vibeCalling it my cheap TRG22 haha.
I also have the similar-ish Anarchy bolt handle/round knob for it and cannot believe how much more I prefer the Sterk! @cannoncrossfire is a genius.
Sadly, today I must attend a darn high school graduation. No shooting for me
We had a competition, won the team trophy the rest of the team were running customs in more competitive cartridges than .308 so I was doing my best not to drop points in the wind!
I took a regular spring purchased on Amazon (part of a selection of sizes) and subbed for the original spring. I had to try out several before finding the one I liked, but it’s perfect. Very very light trigger pull. The 100 springs or how many it was cost less than $10. I ended up using one that was lighter and a bit longer.
I have customed the heck out of my t3x and absolutely love it. It is a 1/2 moa rifle and my standards are tough. I don’t discount any shots, I don’t accept some groups and not others. I am confident I can shoot 100 rounds and still be 1/2 moa.
Love Tikka!!! Arr arr arr! LoL
With a tikka you can start shooting immediately and then upgrade as needed.
I had a complete rifle for $836 and it was shoot able the entire way. Immediately added a rail so I could mount a scope (I bought a used razor 2 in anticipation) but I could've used my Leopold mark ar 3-9 mismatched pos scope. Added a Caldwell sling stud to pic adapter so I could add my atlas cal.
How it started
How it is now (except for titanium ball now) .
Cost is currently $6274. If you have the full amount available right away, or have other existing parts or chassis, it might be better to go other directions. I have nothing inheritable that is r700 or anything else that pushed me that way. No inclinations to clone or otherwise. Besides lefty is hard enough anyway as it is.
I had a complete rifle for $836 and it was shoot able the entire way. Immediately added a rail so I could mount a scope (I bought a used razor 2 in anticipation) but I could've used my Leopold mark ar 3-9 mismatched pos scope. Added a Caldwell sling stud to pic adapter so I could add my atlas cal.
How it started
How it is now (except for titanium ball now) .
Cost is currently $6274. If you have the full amount available right away, or have other existing parts or chassis, it might be better to go other directions. I have nothing inheritable that is r700 or anything else that pushed me that way. No inclinations to clone or otherwise. Besides lefty is hard enough anyway as it is.
Last edited:
Here's my Grandpa's Axe of a T3
T3 Action , was a .223
IBI Barrel
6x45 ( 6mm 223 )
Waters Magazine to allow loading long .
Alloy bottom Metal
Super Varmint Stock
Meopta 2 - 10 Scope
Shoot's 85 gn Sierra hpbt at 2865 fps
T3 Action , was a .223
IBI Barrel
6x45 ( 6mm 223 )
Waters Magazine to allow loading long .
Alloy bottom Metal
Super Varmint Stock
Meopta 2 - 10 Scope
Shoot's 85 gn Sierra hpbt at 2865 fps
Can say this; no stranger will touch the rifle with that dog on guard.
Not sure if this has been reported yet but Waters Rifleman are producing magazines for the T3X that work with 6BR. Not cheap but a nice option.
Right now I just need to get my feet wet and learn the fundamentals of shooting. I've never owned/shot a bolt action rifle before. That being said If I can find something I can grow with and not have to replace to keep advancing that would be ideal. I also like the ability to change bolt faces with the Origin and it being based on the R700 it seems more aftermarket parts are available for it. I am open to buying a Tikka though if I can find one for a decent enough price.
How likely are you going to actually change a bolt face? If you are planning on doing that it might be better to go ai axmc or something along those lines.
Read this post. I try to keep it updated.
Tikka buying guide T3 thread #3268
Page 66. https://www.snipershide.com/shooting/threads/tikka-t3-thread.6252615/post-7301418
I pretty much said all I have to say about it in the first post I made. There is nothing I would buy an Origin over a Tikka for.
You get a complete rifle for the cost of an Origin action, and there's a great chance the factory tikka barrel will shoot sub moa with match grade factory ammo.
If you are chasing ALL THE accuracy, a custom barrel on a tikka will behave no different than a custom barrel on an Origin (or any other aftermarket action for that matter)
