Geissele mounts in 34mm are excellent. For longer scopes , They're excellent. And come in 20moa...
what height would useful? I have AR height mounts already. or would I need lower?..
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Geissele mounts in 34mm are excellent. For longer scopes , They're excellent. And come in 20moa...
what height would useful? I have AR height mounts already. or would I need lower?..
Geissele mounts in 34mm are excellent. For longer scopes , They're excellent. And come in 20moa...
Do you really want a cantilever mount on a bolt action (too far forward) or doesn't it matter on a T3x A1 chassis? I've been seeing regular rings and mounts on then. I thought cantilever mounts were more for ARs.
Yes, mine came with a brake. It comes with one QD mount for the rail but there are two in the rear of the stock. It comes with 2 mags plus one thru the promo.I just watched the Mountain Tactical Video unboxing and he shows it comes with TRG-22 muzzle break and QD sling mounts as well as coupon for third magazine. can anyone confirm this?..
so including this maybe muzzle brake and QD mounts (CTR only has only 1 sling mount on foreend and no QD sockets at all), 3 magazines (CTR has one) , 2-stage trigger, and folding chassis with M-LOK rail, the difference in price is close to becoming a wash.
the only issue I'm finding is the 0 MOA rail, which will require a 1-piece scope mount. correct?..
I think everyone is buying their rifles in 6.5 lolI am very surprised that I don't see any posts (at least close to the top) on this rifle... I am considering buying this rifle in 6.5 CM... I haven't found any negatives on this rifle... Seems to be a step ahead of the RPR.. Comments on any experiences good and bad on this platform most appreciated.
I am very surprised that I don't see any posts (at least close to the top) on this rifle... I am considering buying this rifle in 6.5 CM... I haven't found any negatives on this rifle... Seems to be a step ahead of the RPR.. Comments on any experiences good and bad on this platform most appreciated.
Conaso, what measurement are you looking for? I can pull my son's TAC A1 out of the safe & take a measurement for you if I have the right tool to measure it with.Try this website. But TAC A1 info/response is sparse. I've asked for a measurement several times on three websites and not gotten a satisfactory response. Must be me.?
http://www.tikkashooters.com/public_html/index.php
@ra2bach I called Beretta today with that very question. The short version: you’re screwed. I even called Grab a gun and they don’t have the serial # bc the gun ships from a warehouse.
Conaso, what measurement are you looking for? I can pull my son's TAC A1 out of the safe & take a measurement for you if I have the right tool to measure it with.
R4B
It's about 1.25" according to my calipers but I'm eyeballing because I have an optic mounted. When I measure center of my optic to center of bore I get 2.5" with a 1.3" tall mount.Thank you. I'm waiting for the left-hand version to come out so I can't measure it myself.
I would like to know the height from the center of the boreline to the top of the rail. That info, with my scope-mount height, 1.5", will give me the scope height for my ballistics program, e.g., ? + 1.5" = 2.5" scope height.
It's about 1.25" according to my calipers but I'm eyeballing because I have an optic mounted. When I measure center of my optic to center of bore I get 2.5" with a 1.3" tall mount.
Thank you. I'm waiting for the left-hand version to come out so I can't measure it myself.
I would like to know the height from the center of the boreline to the top of the rail. That info, with my scope-mount height, 1.5", will give me the scope height for my ballistics program, e.g., ? + 1.5" = 2.5" scope height.
Conaso,
Bore centerline to the top of the rail measures as 1.225".
well holy hell...
I FINALLY got THE DUDE from Beretta/Tikka on the phone and learned they are extending the Free Mag Promo another year and are updating the website today to reflect that.
evidently, there has been good response to this (over 1000 claims) and I added my input that it was specifically this promotion that swayed me to the TAC A1 and away from Bergara Pro. the guy sounded like he REALLY appreciated that bit of feedback...
anyway, Tikka T3x 24" barrelled action with 2-stage trigger, in a folding chassis (even if Low-Light thinks it's kinda Low-End), TRG22 muzzle brake, AND 3 10rd mags for $1500 was too hard to pass up for this child...
I ordered mine today as well and yep they did update the website with 2019 as the deadline now.
I tried to pass this deal up especially since right now you can buy the Ruger Precision rifle in 6mm Creedmoor for only $799!
However, I really wanted the Tikka more so that’s the way I went.
anyway, Tikka T3x 24" barrelled action with 2-stage trigger, in a folding chassis (even if Low-Light thinks it's kinda Low-End), TRG22 muzzle brake, AND 3 10rd mags for $1500 was too hard to pass up for this child...
And shipping, etc.?
After factoring in the crappy WA state sales tax that all WA FFLs have to collect and a $30 transfer fee, even at $1499 it sadly comes out $100 more out of pocket than buying from Cabela's with discount gift cards.
After factoring in the crappy WA state sales tax that all WA FFLs have to collect and a $30 transfer fee, even at $1499 it sadly comes out $100 more out of pocket than buying from Cabela's with discount gift cards.
my Cabelas gift cards are for ammo and other things on sale...
Sure thing. Sell the chassis to pay for the stockCan the barreled action of the tac a1 be removed and placed in a Manners stock? Been thinking about doing this.
Can the barreled action of the tac a1 be removed and placed in a Manners stock? Been thinking about doing this.
I picked mine up today. Arrived at my FFL yesterday. Thanks to Euro Optics for fast shipping. I ordered it Wednesday.
Got home. Cleaned the bore with a bore snake. Mounted my DMR 2 with high Mark 4 rings until I can get a 20 moa one piece mount.
Need to order dies. Bought 2 boxes of Hornady Black went out in the backyard to sight in and shoot. Ran 10 rounds down the barrel. Very soft recoil and shot really well.
I am happy with my purchase.
Curious though if everyone uses the TRG brake? Or go with something else.
wait, you already own the tac A1? you don't like the chassis? that's a lot of money to spend for a barrelled action. if it were me, I'd sell the Tac A1 and get a CTR on whatever flavor you like blued or stainless...
wanna sell the mags?..
Has anyone taken the factory rail off their TAC A1 and installed a 20 moa rail? Looking for a specific example. I ran across the Mountain Tactical warning as well and that has me concerned.[/QU
I swapped the Top Rail, should not have done it. The T3 Nightforce 20moa rail that i ordered looks like it fits fine but it doesn't leverage enough against the hand guard. There is a bend/sag on the hand guard where it meets the railnow. I need to put the factory 0 moa rail back on and order a 20moa scope mount.
BUT the rife is fantastic,
I kinda like the traditional look of rifles but it is just something I'm thinking about. Only stock I found available is the Manners T6A. If I found a T2A or T4A I'd do it in an instant.
I like traditional look too but I meant that you'd probably be money ahead if you sold the Tac A1, then bought a CTR and the Manners stock. that should get you just about even.
wanna sell your Tikka mags?..
My tikka mags should work with the manners stock right?
Just an update on optic mounting solutions for this rifle since it has a 0 moa rail.
I ordered the Badger Ordnance 20 moa unimount in the 1.3” height. There is about 1/16” clearance between a DMR 2 and the pic rail on the hand guard.
No room for caps. Sending back and getting the ultra high version which is 1.5” which based on my calculations should provide a total of 3/16” clearance. Hope this helps.
Just an update on optic mounting solutions for this rifle since it has a 0 moa rail.
I ordered the Badger Ordnance 20 moa unimount in the 1.3” height. There is about 1/16” clearance between a DMR 2 and the pic rail on the hand guard.
No room for caps. Sending back and getting the ultra high version which is 1.5” which based on my calculations should provide a total of 3/16” clearance. Hope this helps.
34mm tube, 50mm objective
I got the new mount in yesterday from EuroOptics and the 1.5” Ultra high fit correctly. Enough height to put scope caps on.