-
Having trouble using the site?
Contact support
Vortex Razor HD Gen III 6-36x56
- Thread starter jb1000br
- Start date
Interesting. I thought if you had the lock removed the turrets stayed in the down condition.
Still waiting on Alpha Munitions to get my .25 caliber reamer pilot in stock (waiting on the manufacturing company) so they can ship my .25CM reamer to @CarbonSix so they can finish my barrel and ship it to me... Then I can finally go shoot my EO Exclusive Black Edition G3...
That’s what I thought would be the end result but that’s not the case. I only did it to one scope and while it works, I decided to just use “O” rings to hold the turrets up to prevent them from locking
Not going to lie, I'm liking the black. It has me reconsidering an LRP S3 as my next purchase. How is the eyebox on yours at 36x? I know that it is going to be tighter than 20-25x, but is it so tight that you just about have to be prone or off a bench?
Bought a black version from EuroOptic in November and I'll finally get to try it out soon. I got it mainly for a Vudoo I've had sitting in my safe for years but haven't actually shot yet due to life getting in the way. Finally hand-picked a perfect trigger for it at the Huber factory front so now I can put it all together when I get home next weekend.
My LRP S3, or my RG3 6-36x56? I haven't had the chance to shoot the Razor G3 yet, so can't really comment on the glass or reticle or anything like that. Just playing with it inside the house and getting my chassis cheek weld setup. But after getting it dialed-in, I haven't noticed it to be too picky. But I also haven't really been up to the max mag and tried to look at anything inside of a 15x15 room. LOL
Now, if you're talking about the Zeiss... I also have an LRP S3 6-36x56 ZF-MRi (MRAD). It's on my modded-up 700 5R Milspec .260 Rem. I really love that scope. The glass is amazing for the price, and the turrets are nice, the zero-stop is solid, all the adjustments are smooth as glass, and the eye box (to me) is very forgiving considering how high the magnifaciton range goes...Even at 36x.
The ONLY gripe I have about the LRP S3 is how thick the reticle is. Now, for up close (inside of 500 yards) it's fine. But once you really start looking at things past that distance, its thickness gets more pronounced, and it becomes very noticeable how much of the target starts getting covered up. Which is why a lot of guys are loving them for NRL22, because you don't shoot past 500 yards, so, the reticle is perfectly fine.
That said, some folks love the reticle, and say it's not too thick, and some say it could be slimmed-down some... I'm in the "scale it down about 3/4 the thickness it currently is, and it would be flawless", but that's just my personal opinion. Other than my opinion on the reticle, it's a flawless scope, and I highly recommend it.
Supposedly that was only a G2 problem, and was fixed before the G3 was released. At least, that's what I was told...
I've gotten 2 more gen3 razors in the last 4 months, a black and bronze, both have great turrets. Way better than my first pair of gen3 razors. They have been sent in for upgrades tho.
Last edited:
That's my experience as well. First two had gummy turrets; one was returned to Vortex and came back with awesome turret feel. The most recent (arrived 11/23) had awesome turrets right out of the box.
I'll send the remaining gummy one in soon, now that the holidays are over (and before the 2024 SHOT Show).
Can you describe the "gummy" turrets? Like, sticky or stiff, or mushy & very light click feel and sound?
Mushy "flump" sound from hash to hash. No clack clack clack. Like soft farts as you dialed.
Huh, those mushy turrets seem way better than the fixed ones. I hate how stiff the new ones are. I shouldn't have to death grip the thing to dial. My LHT is a little soft, I can dial it with one finger, but I'd almost prefer that over both of my "fixed" gen3's.
Agree with both points. I have ran into those that like mushy and those that like the clack. User preference and requirement for the set up.
I was just watching that thinking the same thing... Like damn, my Kahles turrets are SUPER smooth and aren't super loud, and it doesn't bother me. My ATACR F1 turrets are smooth, semi-loud, but tactile as well.
I guess my EuroOptic black G3 is definitely a "fixed" newest version. It's got loud clunky clicks and the lock/unlock is kind of janky and requires you to kind of wiggle it to lock & unlock and make sure it's seated all the way up and down...
Sadly, and this is going to piss some folks off, but I think my Strike Eagle has smoother turrets, and it locks and unlocks WAY better than my RG3... I don't understand how the locking mech is so janky and shitty on the G3, when they were able to make the illumination lock/unlock SO smooth, like it's riding on fluid-bearings...
Literally like gen-2 turrets injected with ice-cold grease. Think of how some varieties of lubricating or preservative grease or heavy oil stiffen up in the cold. It's like that. Stiff mushy feel with "muted" clicks.
The feel/sound of the turrets on the "repaired" scope and the new scope are quite reminiscent of gen-2 turrets.
As has been noted, individual preferences vary. I like the loud "clacky" turrets and my arthritic septuagenarian digits have no problem manipulating them. By comparison, my ZCO turrets are easier to turn and have less "edgy" clicks. To me, choosing would be like choosing between two flavors of ice cream. I like them both.
I vastly prefer SE turrets to the G3. I think the new turrets are a response to customer demands and we’re in the minority.
I personally feel the locking elevation is totally unnecessary, as we're dialing it all the time. However, the locking windage was a solid choice.
From my experience they get to it the day they get it, or the next, and get it out the door the same business day, back to you.
I just got a second one last week and the elevation knob was crap, sent back in before I even used it. The windage knob was perfect.
My first one from a few months ago had a perfect elevation knob but meh windage, didn't send it in since I don't dial wind.
Sample of two, but I'd say it just depends on your luck.
You guys are wild. Strike Eagle turrets being better than the G3 ahah.
A thread should be started to note/discuss what members replicate audibly as turret noises.....
Kinda like this guy (he’s stereo-focused). Kinda.
Watch till the end lol (it’s short).
After seeing the comments in this thread today- I can't imagine the service requests Vortex must see : 
The turrets I can dial where I want, as fast as possible are better. I don’t care what sound they make or how they feel. Dialing is an inconvenience. Make it suck less. I’m not larping as a safe cracker.
I'm finally getting back home from a long work trip and will be looking to try out my 6-36 soon. The only question I have is has anyone run into a wandering zero issue with theirs? I don't put 100% faith in the droptesting stuff but from that test it actually passed the drop tests but had a wandering zero which I thought was odd.
I've not had an issue with that in the 4 rifles I have em on. Just make sure your zero lock screws are good and snug. Guys that have wandering zero, I often wonder if they have parallax completely dialed out. It dont make much a difference 400y and out(other than image/reticle focus) but it can definitely affect poi drift at shorter distance.
Hi all,
This week I will be mounting the Razor HD gen III 6-36x56 on a Spuhr SP-4002c, my rifle is a Sako TRG 22 A1 (just for your information).
The Spuhr Mount is an ISMS mount where you can level the scope in the mount using the so called levelling wedge.
Unfortunately the wedge doesn't work since the parallax turret and the windage turret are bigger than the flat surface of the scope needed for the levelling.
Can anyone advise on you solved this issue ?
Thx & kind regards,
Bart
This week I will be mounting the Razor HD gen III 6-36x56 on a Spuhr SP-4002c, my rifle is a Sako TRG 22 A1 (just for your information).
The Spuhr Mount is an ISMS mount where you can level the scope in the mount using the so called levelling wedge.
Unfortunately the wedge doesn't work since the parallax turret and the windage turret are bigger than the flat surface of the scope needed for the levelling.
Can anyone advise on you solved this issue ?
Thx & kind regards,
Bart
Vivacious Stallion
Public Health Authority for the Shadow Gov
Supporter
Full Member
Minuteman
Supporter
If you line up the texture slots on the parallax turret the wedge will barely fit through on the 2 Gen 3s I have in Spuhr mounts.
Not all scopes have reticles that are level with the scope body. I'd forget the wedge and level your scope using a plumb-bob or known vertically level line (door jamb or something (throw a level on it and check it first)). With a spuhr, I'd snug up the mount to the rifle and then level the rifle using the level incorporated into the spuhr. Then use a plumb-line to level the scope inside the mount so that your vertical reticle line is level with the plumb-line.
Goal is for the spuhr bubble to show level while at the same time your vertical reticle line is parallel to the plumb-line. Now torque ring caps.
If you are using a different level in addition to the spuhr, install that level last, again while the spuhr level and reticle/plumb line both show level.
I mount with feeler gauges on the flat of the erector housing. But when I set my bubble level I use a laser level and the scope reticle.
Leveling the reticle is paramount. I like to have a good level reference on the Pic rail, then with the rifle/rail leveled, I level the reticle to a laser. Then install whatever bubble on the system you want, to have a reference to where you have a leveled rifle/reticle. Doing this is playing within the tolerances of the levels, but it's worked for me on all my systems.
Self-leveling laser levels used to be pricey (and if you need a work-grade one like a Bosch or DeWalt they still are) but one can get a cheap one for mounting scopes for ~$20.
Amazon.com
www.amazon.com
Ordered a black one from EuroOptic bad got it in and fiddled with it for about an hour before just calling Vortex up. The parallax was jacked up, explained to the gal on the phone what was going on and they had a new one shipped my way the next day with a return label in the box so I could send the missed up one back. That was on Thursday, had the new one by Monday
What were the symptoms? I have a black one from Euro as well, and to get clear reticle/image at 300y, I have to have parallax near max or at max depending on magnification. None my 3 bronze ones are like that.
