-
Having trouble using the site?
Contact support
What did you do in the reloading room today?
- Thread starter Kisssofdeath
- Start date
I keep it pretty organized...
I'm not a tinkerer loader...
I have a full shop to play on firearms that's just cleaning and loading really
What a deal had 6 ft of reloading bench, added 14 ft wow, wait for it, subtract 14 ft of gun working bench.
By my expert calculations and having been awarded my GED long ago I belive that I'm close to 6 ft again.
Loaded some and processed more 308
New barrel needed new reciver old one had too much play, too damp and cold to paint so will run it for now.
That damn c-clip on the dust cover gets harder to put on each year.
By my expert calculations and having been awarded my GED long ago I belive that I'm close to 6 ft again.
Loaded some and processed more 308
New barrel needed new reciver old one had too much play, too damp and cold to paint so will run it for now.
That damn c-clip on the dust cover gets harder to put on each year.
My powder order shipped so I’m gonna reload some 260 and 7 saum in a bit.
I really need to load some 223 as well.
I really need to load some 223 as well.
- Nov 3, 2010
- 9,877
- 20,904
22 Nosler on new brass for a hopeful range trip this week if the weather plays nice
Dropped powder and seated 142 SMK’s for the 260 this afternoon.
All done.
150 260 and 100 7 saum.
150 260 and 100 7 saum.
- Nov 3, 2010
- 9,877
- 20,904
Yessir. I have multiple presses mounted to aluminum plate that mate with T track. The rest are stowed in another space when not being used.
Measured my base to ogive for all my 6.5mm bullets for my Tikka Tac A1... this gal has a long/deep throat (giggity) . .080" longer to the lands than my Proof barreled RPR.
I’m not sure if this was meant to be tongue in cheek humor, but if not, you’re doing it wrong.
- Nov 3, 2010
- 9,877
- 20,904
I like that. Makes more sense than having multiple presses mounted and eating up bench space. Looks like I need to go back to the drawing board!
I have to agree. Is that comparator not supposed to go down on a bullet that is loaded to the lands? I mean, I get the way you are doing it, but it doesn't give you "ogive to the lands" measurement. When tips are mechanically uniformed, what you're doing will work to give you a seating depth, but still won't tell you exactly where the ogive touches the lands.
Last edited:
I was measuring OAL like that. Obviously I did things the correct way by putting the ogive into the comparator to get the BTO measurement.
Friend has been wanting to find a decent stock for his passed dad's first rifle....a Winchester Model 1902.
Found a stock on Ebay a week or so ago. Ordered it up and have been Tung/Linseed oiling the crap out of it.
Worked on putting it together today......
Sucks the little escutcheon that lines the take down screw hole broke while disassembling the old stock.
Fortunately found a guy that sells them online. replacement ordered.
Found a stock on Ebay a week or so ago. Ordered it up and have been Tung/Linseed oiling the crap out of it.
Worked on putting it together today......
Sucks the little escutcheon that lines the take down screw hole broke while disassembling the old stock.
Fortunately found a guy that sells them online. replacement ordered.
My helpers and I finished the 4k round 9mm loading marathon.
Life is hard!
The smiles are real though, seeing the end of 4k is cause for celebration.
Past couple of days I’ve glued rhinestones on my daughter’s tap competition outfit and loaded 200 rounds of 6.5 Grendel.
- Nov 3, 2010
- 9,877
- 20,904
Started to work(update)on the reloading bench a little finally. Not sure the exact direction yet but that’s half the fun I guess. Today I will build the frame for the back wall and may finish laying the tile. I have 5 new LED fixtures to hang throughout the house so may not get to this today.
Stuck about seven cases .223 in the die. ? WTF?!?!?!
Cleaned the die, lubed the cases beyond where they should be. Cleaned out the top of the ram to make sure the holder is floating. And, backed off the die until cases just fit comfortably in my AR. Stuck the next F’n case!
That’s what I did last night. I think I need a new die.?
Cleaned the die, lubed the cases beyond where they should be. Cleaned out the top of the ram to make sure the holder is floating. And, backed off the die until cases just fit comfortably in my AR. Stuck the next F’n case!
That’s what I did last night. I think I need a new die.?
Processed some 300 blackout and found a new home for what will be my ar vise
Didnt want to drill I to that black walnut...
Didnt want to drill I to that black walnut...
Hope you didn't get any of those rhinestones glued to your precision rifle, the ribbing could be unbearable!
9mm 115 grain today. 700 in total between these two lots.
That reminds me I gotta do up a ladder/OCW for my 30-40 Krag Jorgensen. I think I'll do 180 round nose with a lighter powder load of either IMR 4064, IMR 4895, or IMR 4320.
Never really been a 9mm guy but I picked a few up over the last couple years.....
Smith and Wesson 952
Smith and Wesson Model 39
Nazi High Power
And my job may go 9mm
Got a tool head and dies recently, plan on using W231 for powder.
What's a good grain projectile for plain old range use?
Is 115 where I want to be?
I’ve never noticed much difference between the 147 and 115’s (unless you’re running +P pressure). For cheap 9mm range fodder, just use whatever bullets you can find cheap over a middle of the load book charge. I use Xtreme Bullets 115gr plated over (if I recall correctly) 4.0gr of Bullseye. Nice light recoil but dependable/stout enough I don’t have issues with FTFeed/FTEject’s.
- Nov 3, 2010
- 9,877
- 20,904
There’s very few pistols I actually want anymore but a 952 is one I’ still desire.
pmc posted up pics and group shots of it on a thread over in Vintage. Might have to go back a year-ish? Anyhow, it's a nice piece.
I thought it was a 52-2 when I saw it on the counter of my local shop.
I learned something new similar to how I learned a 52-2 is not a long slide Model 39 when I saw the 52-2 in the counter of my local shop.
The 952 is a -1 with grip safety. I learned I was smart to immediately say "Ill take it" when I did.
Its not as accurate as the 52-2 but its plenty accurate.
I haven't been shooting much pistol these days but like to be able to go into the ammo supply when I desire and have plenty on hand.
If my job switches from .45 to 9mm Ill start shooting 9mm regularly.
Usually I buy FMJs from Precision Delta. Bit more expensive paying for jackets but at the rate I shoot not going to make me poor.
I want to try to use W231 same as I use for my .45. It pours great in a Dillon.
Kind of surprised by some of the loads being used. In my .45 I think I use 5.3 grains under a 230 FMJ. Reliable function but not beating my pistols. These 9mm loads seem to pack in the powder.
I load .38 Special with use in my 52-2 in mind. I use 148 grain HBWC and they are ridiculously light, I think 2.9 grains or so of W231. These still shoot plenty good in my .38 revolvers too.
I got the trifecta 39, 52, 952.
The feel in the hand is just about perfect.
I was hoping the 39 would be an occasional carry gun but my abilities with Double/Single action operation is so degraded from only shooting SA and Striker fired I don't feel comfortable with it.
I use 115's for all my range fodder because they're usually the cheapest.
Berry's plated, Xtreme plated, or whatever Rocky Mountain Reloading has on special or really anything that's about 6 to 8 cents a piece.
I'm using Winchester Auto Comp right now at 5.3 with those pictures FMJ's. It's a max +p load according to the Sierra Manual. It really hammers out of my CZ's and glock. I couldn't use this load with the plated bullets because it's not recommended to push plated bullets over 1100-1200fps. I'm jumping the bullet maybe .010" in my CZ because they're really short throated compared to the glock, and anything else for that matter.
Win 231 is a great all-around powder and it doesn't take much to get a good mid-range load that cycles effectively for practice. 4.5-5 grains under a 115 and you should be in business.
Ive got so much W231 and Hodgdon equivalent on hand it will be awhile before I need more with my anemic loads.
WST any cleaner than 231?
I think it is.
it’s very soft shooting and meters like water.
less smoky with lead bullets than bullseye.
That was my one complaint with 231. Dirty pig. Never used WST, but I do know Auto Comp is cleaner than 231
