Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!
Join the contest SubscribeInteresting. I own a small service company and have similar. I'm never gonna look at it the same way now. Are you considering insulation? We have a product in marine industry called Soundown that I've used.Barring any major setbacks, it'll be completed in about a month.
It started off as a work van with all the metal bins and roof racks installed.
45 minutes after arriving home with it, it was empty except for the floor mat.
Next morning, it looked like this.
View attachment 8439258
As you can see, it didn't take long to start applying the kill mat for sound deadening. I did decide to add a lot more after this pic was taken.
The walls have the kil mat, a layer of adhesive foil backed foam and any place with large air gaps has rock wool. In addition to the above, the roof has 2" foam board sandwiched between it and the tongue & groove ceiling.Interesting. I own a small service company and have similar. I'm never gonna look at it the same way now. Are you considering insulation? We have a product in marine industry called Soundown that I've used.
The walls have the kil mat, a layer of adhesive foil backed foam and any place with large air gaps has rock wool. In addition to the above, the roof has 2" foam board sandwiched between it and the tongue & groove ceiling.
The area above the cab has the kil mat and adhesive foam. It will get stuffed with rock wool before final trim.
Floor has kil mat, foam adhesive and 1" foam board between the furring strips. 1/2" ply on top of that.
To say it's insulated, might be an understatement.
An older photo showing some of the insulation and the test location for the fridge.
View attachment 8439283
The benches/bed/table setup.
And the hair factory.
Final insulation and trim work still left to do before installing the last section of ceilingView attachment 8439284
We used boat decking foam so Cherry could roam around without slipping. And, her sloppy drinking doesn't hurt it. The cabinets will cover the edge of the horizontal foam.
View attachment 8439285
Still need to do some paint touch up over the staples/caulking. Apparently, my finger was dirty when I blended it in.
The little hole in the foam you see is a finger hole to access the clothing drawer.
I drink Irish tea so will bring my own appreciate the hot water thoughI only make tea for my woman.
She prefers strong, black coffee.
If she leaves some tea in the cupboard, you can have some.
Leave your water out in the sun, it will get hot enoughI drink Irish tea so will bring my own appreciate the hot water though
Leave your water out in the sun, it will get hot enough![]()
Assuming this is off hours for the beer would Bushmill's do I can hold that.We are talking about tea on a Gun forum? Hold my beer…..![]()
We are talking about tea on a Gun forum? Hold my beer…..![]()
As long as it has a good dose of caffeine, then it would be acceptable.
No caffeine?
No bueno...![]()
super hot and gnatsAnyone going to Arena this weekend for the Deep South ELR match?
more gnats
woman have secret powers which make men suffer moreThey just fly a little slower.
I fucking hate those bastards.
Rebecca and I can be sitting outside and they will literally attack me, especially my ears.
The just leave her alone.
WTF? Why me?
Irish…They just fly a little slower.
I fucking hate those bastards.
Rebecca and I can be sitting outside and they will literally attack me, especially my ears.
The just leave her alone.
WTF? Why me?
As long as it is Black BushAssuming this is off hours for the beer would Bushmill's do I can hold that.
Throw up a list and if there's stuff people need, you'll sell it.To all reloaders, I ended up with some powders I grabbed when things were tighter than they are now, and are sitting in climate controlled area.
If anyone is/has been searching for something specific ; PM me and I can bring with me if I have.
JAT
Trying to avoid that. Don’t need to sell. Just throwing it out there as a friendly jester to this group.Throw up a list and if there's stuff people need, you'll sell it.
Ill trade us869 for 'almost' any powder or primers.
Not sure I would call 2300 yards elr.
But its good for people to try a distance they have shot before .
the right corner is actually 2300meters
Not sure I understand. I thought 1 to 2 miles was ELR and over two miles is considered....? (this is a test)Not sure I would call 2300 yards elr.
But its good for people to try a distance they have shot before .
Most elr matches now days are 3200 plus some as far as 4300 plus.Not sure I understand. I thought 1 to 2 miles was ELR and over two miles is considered....? (this is a test)