Not a great picture but this a rifle that the guys at APA built. Sentinel stock, Badger Ordnance M2008 action, Bartlein barrel, Huber two stage trigger. I hope to get one made by Terry himself soon.
KMW thread
- Thread starter Scotch_egg
- Start date
Remove it from the stock, flip it upside down, insert 3/16” bit into the pillars and unscrew slightly, adjust, tighten.
Hey Eric.
#1: Loosen the crossbolt tensioning the clamp body.
#2: The bottom of each column/leg will have a 3/16" hex drive machined into the bottom.
#3: Remove the cheek rest assembly, and break lose BOTH columns. This will release the tension on the backplate and allow lateral movement.
Once you have the cheek rest adjusted L/R, tighten both columns to lock down your preferred position.
#3A: Most of the stocks hosting KMW LoggerHead hardware have two small holes drilled into the bottom of the stock opposite the cheek rest.
You should be able to access the columns through those two 1/4" holes without removing the cheek rest from the stock (after relaxing the
clamp body.)
*Some of the MCS stocks are not inletted with these two holes.
Keeping an eye out for a SA Sentinel to bring over to Aus. Id buy a new one, but goddamn the AUD is rough atm!
TIL, but to be fair I have one Sentinel and have been through several MCS and Foundation.
Great stock. First custom stock i ever ordered. actually funny story. these stocks being so dam popular, i got one on the hide about 11-12 years ago for a great price after waiting form months for a used one. after i got it someone messaged me and offered me more than a new one costs they just didnt want to wait. so i sold it and got this baby in my favorite color. boom-shakalaka.
Similar threads
