Patriot Valley Arms, I believe?Who is pva
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Post any issues in the thread below or reach out directly to support!
View thread Contact supportPatriot Valley Arms, I believe?Who is pva
Who is pva
Unfortunately, that's me bombing that (and most of) the stages.
Yes I took the dremel to the underside of the diving board. It was a learning experience as my first dremel project but it worksDid you shave down the reptilia diving board to fit the GII razor objective bell?![]()
... but I knew better than to try and follow it up.
Amazing rifle, where did you get that very nice barrel decal ?
Good effortView attachment 8452598View attachment 8452597
The rust is. Thick. $75 308 barrel was doing well till the 5th shot.
Didn’t you just “upgrade” from NF ATACR to a ZCO like a month or two ago?View attachment 8453710
My AXSR’s participation trophy for taking second at a pistol match. And by participation, I mean participating in being home during the UPS delivery guy’s visit after getting home from the match. Time to see what all the hubbub is about.
I didDidn’t you just “upgrade” from NF ATACR to a ZCO like a month or two ago?
Nothing against it. Was trying to sell it to buy and try the SB636 with the TR2ID, but a guy on here offered this as a 1:1 trade so I said sure.Anything against the ZCO, or you just wanted to compare?
Yeah, just wow!Zco and Tt is even trade?
Interesting. Why? I only have the 7-35 ATACR, several SB 5-25s, and the new SB 6-36 to compare. And because this is a picture thread, AXMC 300NM with the SB 6-36 TR2ID (one of the first with the new reticle).I prefer the zco
Looks like you didn’t make any compromises… not even zero of them.
No paint=low social credit
Gen3XR FineWhat reticle you go with?
It’s ok, I’m going to buy the spray paint with my Star Card. Guaranteed social credit boost. It’s got the points cards crave!No paint=low social credit
Just wasn’t a fan of the reticle in the TT.Interesting. Why? I only have the 7-35 ATACR, several SB 5-25s, and the new SB 6-36 to compare. And because this is a picture thread, AXMC 300NM with the SB 6-36 TR2ID (one of the first with the new reticle). View attachment 8453997
What are your thoughts on the TR2ID? I plan to have my 6-36 swapped to that reticle eventually.Interesting. Why? I only have the 7-35 ATACR, several SB 5-25s, and the new SB 6-36 to compare. And because this is a picture thread, AXMC 300NM with the SB 6-36 TR2ID (one of the first with the new reticle). View attachment 8453997
So far I like it, but I’ve only had one session with it at distance. It’s a good “sparse” tree reticle. I just shoot ELR at my own range, no comps. I only need the tree for when I run out of Elevation on the turret and need to hold over AND hold some wind. I have a Tremor 3, but it is sooo busy it is hard to spot misses. I also have a Mil-XT which I like a lot. This is very similar. I don’t know how it would be for comps, but for me I think it’s perfect. (WAAAY better than the P5FL with not enough info, and the GR2ID that looked even busier than the Tremor3 to me).What are your thoughts on the TR2ID? I plan to have my 6-36 swapped to that reticle eventually.
How many S&Bs will Dr Strangeglove buy this year?What are your thoughts on the TR2ID? I plan to have my 6-36 swapped to that reticle eventually.
Comp shooters , if you switch to upgraded followers. Keep an old mag around. Can only fit 10 in the new style. 11 in the ole style helps on the 12 round stages.
Give it a year, Magpul will release 50rd AICS and 100rd AXSR/MC drums#magchangesarehard
#justruna100rddrum
By went down do you mean it wouldn’t reset? Wouldn’t fire? Was firing without pulling the trigger? Was first or second sear out of adjustment? Working fine after hosing it out with some liquid?View attachment 8455548
Well…it went 4,287rds in AZ meth dust before it went down. I should have not been an asshole and just flushed it each time I tore it down rather than just hitting it with a brush. Popped the spare in and got back to work.
#SparePartsSavedTheDayThePawPatrolWay
#DontNeglectYourTriggersNeeds
#MissingButLookingCoolIsBetterThanMissingAndLookinLikeATool
As in it wouldn’t recock the firing pin when closing the bolt. Nothing was adjusted on the trigger so it still sits adjusted as it came. Going to buy some brake cleaner and compressed air but it worked for a few cycles after a light fluid flush but then it stopped again. I’m not worried, just going to give it a good cleaning and blow out tonight.By went down do you mean it wouldn’t reset? Wouldn’t fire? Was firing without pulling the trigger? Was first or second sear out of adjustment? Working fine after hosing it out with some liquid?
As in it wouldn’t recock the firing pin when closing the bolt. Nothing was adjusted on the trigger so it still sits adjusted as it came. Going to buy some brake cleaner and compressed air but it worked for a few cycles after a light fluid flush but then it stopped again. I’m not worried, just going to give it a good cleaning and blow out tonight.
Meet the Barrett Mk22, brought to you by AI's un-neccessary trigger-fiddling experiments.Lighter fluid, brake cleaner etc all work fine. Seen a couple that had to be opened up completely...
Give me a 3 pos safety and an og trigger everytime baby
Didn't realize you were at that match, it was a fun one despite the target failures.Comp shooters , if you switch to upgraded followers. Keep an old mag around. Can only fit 10 in the new style. 11 in the ole style helps on the 12 round stages.View attachment 8455470View attachment 8455474
Good. I've found it sad that the AT has been sitting in the closet untouched...Almost time to get a ZCO on my AT-X, and put old glory back on the AT. Never thought I’d have one AI let alone 2.
View attachment 8455629
Yes. Target indicators on the bars would have been nice also. I was mostly punishing berms but was nice to get to a matchDidn't realize you were at that match, it was a fun one despite the target failures.
What reticle is that?
Almost time to get a ZCO on my AT-X, and put old glory back on the AT. Never thought I’d have one AI let alone 2.
View attachment 8455629
Beautiful set you have!!Almost time to get a ZCO on my AT-X, and put old glory back on the AT. Never thought I’d have one AI let alone 2.
View attachment 8455629
Brah i seent you and your mag changes at the gas gun Match#magchangesarehard
#justruna100rddrum