Beautiful set you have!!
Trying to decide currently if I’m going to multicam my ATX (elite sand currently) or trade it out for another AT/thumbhole
Wasn't me bruh I got lots of hair....also wouldn't be caught dead running a NF or Leupold everyone knows this .....
Last edited:
Wish I realized you were there and using a Minox spotter, would love to get to look through it sometime!
Is there anyone near Idaho Falls that would let me cycle their AXSR a few times and maybe try a barrel swap? I am trying to break down my reasons for not owning one. 
I keep finding peace at shooting a lot more since Mom got diaged with bad C last month. I shoot almost every other day to clear my head. Lately been thinking about a new scope; maybe the 6-36 S&B with the new reticle. Then i forget. Waiting for my new barrel to come in this Friday. Then i will retire this one.
A new range to me with grass even! First time there, gave the AXSA ES a spin. Just 4 benches, I'd have brought a shooting mat had I known it's primarily a prone range.
Can't you just lay down and shoot on the grass without a mat?
Can you shoot more than 200yds at this range?
200 yards is the max that was available to me. Not sure what else they might have there longer.
Yeah I could have just laid down, but wasn't really dressed for grass/dirt. I figured they had good benches. Live and learn.
Always take your mat. Even if planning to shoot off a bench, the mat placed on top of the bench makes things nicer all around.
Lol, the sandpit gotcha, welcome to the club. Glad you had your backup. I've just started zippo fluid drenching mine from the top after a sandy/windy match.
You’re a 308 AI shooter!! We’re better than that. We look for the dirtiest, muddiest, lowest water seepage spot to lay in. It’s who we are, it’s what we do
6.5 guys bring their blanky and throw pillow!
In stock at time of posting
Short action SFP 308 bolt complete
www.eurooptic.com
Short action SFP 308 bolt complete
Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL
Accuracy International Bolt Assembly Complete 308 Win including bolt/shroud assembly with 1.6mm firing pin. MPN 26547BL | Only at EuroOptic.com!
I think they were sold out within an hour of @hafejd30 reposting it on this thread.Short action SFP 308 bolt, is now out of stock.
I started a dedicated thread about them in this forum about an hour before the post in this thread. They sold out in basically 2 hours but I think they only had 4 of them available.
This one time, at band camp, I put on face pant and went streaking through the quad. Despite being the fastest out of all of my invisible friends (and girlfriends who live in Canada but can’t afford to move to the US just yet), I still wasn’t fast enough to make my dad proud. That’s why I spend money on things like this:
::shake weight not pictured::
::shake weight not pictured::
I have at the range but not at a match yet or side to side with the others (I don’t have them anymore). I like all three but I think the TT wins it out for me. But honestly not for anything other than that tool less zero feature. It’s tits. For me and my eyes, the ATACR and ZCO looked at brush and stuff (on the same power) at distance in the desert the same. The TT is just so easy to quickly float if you’re swapping calibers. Plan was to also try the SB636 but man I don’t think I’m going to pass this on. As for the turret “feel” (gay) they’re nice but I don’t see what the internet beats off too about their feel. They click, as they should. They feel nice but so do the ZCO 10Mil NLE turrets….and I liked the ATACR turret feel too. Glass seems to split hairs at this level, which is nice but honestly it’s clear and does really well in 105F mirage.
All in all I like the TT but I have a hard time saying I’d pay that high of cost out of pocket over an ATACR735. …plus the reticles are gay and Mil-XT and MPCT2X are at the top of my preferred reticles. …but I like the Gen3XR Fine a lot more than I thought I would. Although I hear the PST Gen 2 is the bee’s knees and maybe I should get that instead?
Looks like she’s the one to be painted this winter.
Thanks. I have the SB 6-36 with the new TR2ID, and ATACRs with Mil-XT (4-20) and Tremor 3(7-35), plus some SB 5-25s with H2CMR reticles. I shoot ELR, but just for fun, and I like the H2CMR a lot until I run out of Elevation and have to hold both Elevation and Wind, then I’m just guessing. I really like the Mil-XT but need more mag than just 4-20. I like the 7-35 ATACR just fine, but the Tremor3 is TOO busy. The SB 6-36 TR2ID is just about perfect for me so far, but if I thought the TT was noticeably better optically, and the Gen3 XR is not too fine, I wouldn’t be opposed to trying one. I haven’t looked hard at the ZCO 8-40, but I don’t think it has anything on the SB 6-36 from what I’ve seen so far.
i just closed my eyes, taped the lenses and autistically sprayed those with rustoleum. Feels good now
Sometimes I wonder if my old sage green AX is still here. Sold it to a guy in these forums summer of 2019.
Did AI change the location of the serial # on the receivers? I just saw this on a GunBroker ad for an AT and I really, really dislike it if so. I know it shouldn't matter but it's just not right. The receiver is also a matte black which looks weird to me.
They did that because the AT-X chassis sits so high that it would cover where the original SN was.Did AI change the location of the serial # on the receivers? I just saw this on a GunBroker ad for an AT and I really, really dislike it if so. I know it shouldn't matter but it's just not right. The receiver is also a matte black which looks weird to me.
That's the singular way they deviated from Sam's original design of the chassis. 
Last edited:
It's still living a happy life, thanks for checking in on it. Currently has a 6 Dasher barrel on it. Had it out recently on a multi day hunting trip and it blew up about 300 ground squirrels. 55gr Nosler BTLFs at 3850 are spectacular on the little buggers. Got a couple of coyotes with it too.
I wish I could remember who I sold my AE Mk3 (my first AI purchase) and 2x ATs to, but those old PX threads and PMs were victims of the Scout transition.
AT back off unemployment for the night
| AI AXSR Weight | 0.308 | 6.5 CM | 6.5 PRC | 300 NM |
| AXSR Chassis | 138.3 | 138.3 | 138.3 | 138.3 |
| Barrel | 51.84 | 80.64 | 58.7 | 103.52 |
| NF 7-35 | 39.3 | 39.3 | 39.3 | 39.3 |
| Badger COMM | 8.6 | 8.6 | 8.6 | 8.6 |
| Badger CLIF | 1.8 | 1.8 | 1.8 | |
| Badger level | 0.63 | 0.63 | 0.63 | 0.63 |
| Bipods | 14.4 | 27.6 | 14.4 | 14.4 |
| Thunderbeast | 20.6 | 10 | 9.7 | 20.6 |
| Impact 4000 | 16 | 16 | 16 | |
| Modtac | 8 | 4 | 8 | |
| Forend Weight | 12.8 | 12.8 | ||
| Sunshade | 2.3 | 2.3 | 2.3 | |
| Ounces | 301.678 | 341.97 | 269.63 | 366.25 |
| Loaded mag | 17.8 | 16.8 | 13.7 | 22.8 |
| Pounds | 18.88 | 21.37 | 16.85 | 22.89 |
I bought a LWTS LR here March 2023 for 6500. Those radioactive pvs30s were $3000 a while back iirc
Turn your screen lighting up
I can see perfectly fine here
Lots more at night! Unfortunately these particular tags are only valid during normal daylight hours. So half hour after sunset
Another match down and a Win in the Mil/LEO Division 
Here's the Skills Stage video.. cost me a top 10 finish not cleaning this
new Proof Barrel has made a world of difference 
Here's the Skills Stage video.. cost me a top 10 finish not cleaning this
new Proof Barrel has made a world of difference
Tell everyone in your squad that it is your first match.
Take your time, have fun, learn a lot.
-Stan
