Accuracy International Picture Thread

IMG_9405.jpeg


Which one of you ?
 
Anything against the ZCO, or you just wanted to compare?
Nothing against it. Was trying to sell it to buy and try the SB636 with the TR2ID, but a guy on here offered this as a 1:1 trade so I said sure.

Just bouncing around scopes before picking one to live on the AXSR before I paint it.
 
Interesting. Why? I only have the 7-35 ATACR, several SB 5-25s, and the new SB 6-36 to compare. And because this is a picture thread, AXMC 300NM with the SB 6-36 TR2ID (one of the first with the new reticle). View attachment 8453997
What are your thoughts on the TR2ID? I plan to have my 6-36 swapped to that reticle eventually.
 
What are your thoughts on the TR2ID? I plan to have my 6-36 swapped to that reticle eventually.
So far I like it, but I’ve only had one session with it at distance. It’s a good “sparse” tree reticle. I just shoot ELR at my own range, no comps. I only need the tree for when I run out of Elevation on the turret and need to hold over AND hold some wind. I have a Tremor 3, but it is sooo busy it is hard to spot misses. I also have a Mil-XT which I like a lot. This is very similar. I don’t know how it would be for comps, but for me I think it’s perfect. (WAAAY better than the P5FL with not enough info, and the GR2ID that looked even busier than the Tremor3 to me).
 
Last edited:
  • Like
Reactions: TNVol
001754C6-C44A-40BD-ACB9-3B59BE7D3C15.jpeg

Well…it went 4,287rds in AZ meth dust before it went down. I should have not been an asshole and just flushed it each time I tore it down rather than just hitting it with a brush. Popped the spare in and got back to work.

#SparePartsSavedTheDayThePawPatrolWay
#DontNeglectYourTriggersNeeds
#MissingButLookingCoolIsBetterThanMissingAndLookinLikeATool
 
View attachment 8455548
Well…it went 4,287rds in AZ meth dust before it went down. I should have not been an asshole and just flushed it each time I tore it down rather than just hitting it with a brush. Popped the spare in and got back to work.

#SparePartsSavedTheDayThePawPatrolWay
#DontNeglectYourTriggersNeeds
#MissingButLookingCoolIsBetterThanMissingAndLookinLikeATool
By went down do you mean it wouldn’t reset? Wouldn’t fire? Was firing without pulling the trigger? Was first or second sear out of adjustment? Working fine after hosing it out with some liquid?
 
By went down do you mean it wouldn’t reset? Wouldn’t fire? Was firing without pulling the trigger? Was first or second sear out of adjustment? Working fine after hosing it out with some liquid?
As in it wouldn’t recock the firing pin when closing the bolt. Nothing was adjusted on the trigger so it still sits adjusted as it came. Going to buy some brake cleaner and compressed air but it worked for a few cycles after a light fluid flush but then it stopped again. I’m not worried, just going to give it a good cleaning and blow out tonight.
 
  • Like
Reactions: HKSniper11B
As in it wouldn’t recock the firing pin when closing the bolt. Nothing was adjusted on the trigger so it still sits adjusted as it came. Going to buy some brake cleaner and compressed air but it worked for a few cycles after a light fluid flush but then it stopped again. I’m not worried, just going to give it a good cleaning and blow out tonight.

Lighter fluid, brake cleaner etc all work fine. Seen a couple that had to be opened up completely...

Give me a 3 pos safety and an og trigger everytime baby
 
Didn't realize you were at that match, it was a fun one despite the target failures.

What reticle is that?
Yes. Target indicators on the bars would have been nice also. I was mostly punishing berms but was nice to get to a match

MR2. In my spotter. Ffp. I like it to measure targets / misses and “pre shoot” stages
DD877506-C82F-4E7B-BAB5-39D61328B6BF.jpeg

DD877506-C82F-4E7B-BAB5-39D61328B6BF.jpeg

And in case anyone didn’t look close and thought we were shooting full size ipsc lol.

886822A2-CFBF-448D-A3B0-58FE44DBA303.png
 
Last edited: