Search results

Search the forum Search Articles
  1. B

    28 Nosler Load Data

    180 Berger VLD hunting 78.5 grains Retumbo CCI250 Nosler brass COAL 3.61 .040 jump 3080 fps I am shooting a McGowen Remage 26” barrel, 1 in 8 twist, on a Rem 700. 1/4 MOA to 1000 yards.
  2. B

    300WM loads using H1000 and 215 Berger Hybrids

    I am at mag length on a BDL, 3.68”. I am jumping .040. If your accuracy is good at 75 and you are at least at 2850, it will be a hammer. You have to remember high BC bullets carry velocity at longer distances. I don’t trust my drop measurements until I get past 800 and shoot at least two...
  3. B

    300WM loads using H1000 and 215 Berger Hybrids

    I am shooting 77.5 h1000, cci250 primers behind 215 Bergers in Norma cases in a Remington Stainless m700 Long Range. Half MOA or better to 1000 yards. Slight flattening but no ejector mark. So far I am on the fifth loading on the same brass. I only get 2850 in mine even at 77.5. Hammered an...
  4. B

    Loads for .260 /.243/ 6.5x47/6.5 Creedmoor

    Berger 130 vld with 44.5grains of h4350 and CCI 200 on my 260 REM AAC barrel gets me 1/2 moa or less at 3009fps. This was on Remington cases, I have gotten better groups on my Lapua cases, but forgot got my chronograph that day.
  5. B

    260 Rem Load Recipeies

    I am shooting the same set up. 260 Rem,130 Berger VLD with 44.5 grains of H4350 and CCI200 primers. I am getting 2957 fps average and .5" or less groups when I am on. I can push mine to 45 grains with slight ejector marks, but backed it off. I have yet to pay with the jump and it is set to...
  6. B

    AR-30 customizations

    Re: AR-30 customizations There is a video for the APA adapter, but it looks like the length of pull with the PRS or a A2 stock would be extremely long. A laid an A2 stock up to my AR30 and it looks like it will be about 2.5 to 3 inches longer with an adapter I am guessing that adds about...
  7. B

    AR-30 customizations

    Re: AR-30 customizations Armalite came through with a stock adapter. Anyone buy one yet? AR30 stock adapter
  8. B

    338 Lapua Powder

    Re: 338 Lapua Powder I am using 91 grains of RL25 behind 300 SMK's with cci250 primers. I have been getting good results and no pressure signs under 45 degrees F. I don't know what will show in higher temps yet due to we are still having winter here in Wyoming. I would like to push mine a...
  9. B

    Loads for .260 /.243/ 6.5x47/6.5 Creedmoor

    Re: Loads for .260 Rob, You may have stated this somewhere else in this post but what rifle and length of barrel are you using for your results of the 6.5 Creedmoor?
Top Bottom
Back
Home
Forums
Merch
Alerts