We have but I gots like 1/16th of meat left on this 4” disc so she be ready to work.
I just don’t know if I wanna go 14.5 or 16.1 on the length
Short, Really Short 308
I love the idea. But if your can says only 14.5"+ from 308, I would pin and weld a muzzle device to get you to 16" and build it as a rifle with whatever stock/chassis you wanted. Or if you want to get a new can, get one with a shorter or no barrel length restrictions and go wild. 10" - 12"...
www.snipershide.com
You can go really short like @SkyScrapin.
is AX stock on AT frowned upon in this micro community, or whatevs? Post pics if you have one please.
That’s known as the AT LE. Great set up. Thumb hole is a vibe though
Hitting my range tonight with the AT
Couple 100 yard 3 shot groups. About 3/8”
Then plates at 280, 400 and 553 yards. Zero misses in a decent wind.
308 win
178 ELDX
Couple 100 yard 3 shot groups. About 3/8”
Then plates at 280, 400 and 553 yards. Zero misses in a decent wind.
308 win
178 ELDX
Last edited:
Huh. That’s pretty interesting. Here’s a couple links on that gun:
Maverick 41 .338 Lapua Mag Rifle Package
Maverick 41 Rifle Package | Only at EuroOptic.com!
They don’t have “SF” in the serial, however. No idea what that means.
That's an interesting rifle. Importer was AINA Mingus, TX and it looks like an MC on an AT chassis. This seems to date from around 2010.
AINA Mingus
AINA Mingus
Attachments
Last edited:
It was a awsm action in a ax chassis. Pretty cool rifleHuh. That’s pretty interesting. Here’s a couple links on that gun:
Maverick 41 .338 Lapua Mag Rifle Package
Maverick 41 Rifle Package | Only at EuroOptic.com!www.eurooptic.com
They don’t have “SF” in the serial, however. No idea what that means.
Nice paint! But that grip is giving off serious “banana in the tailpipe” vibes
Some folks must be spending -$20,000,000 to get this shit down to $255…
New Proof .308 Barrel stretched out to 900yds
Hit the range today and shot some more boringly accurate groups. Love this damn thing.
Anybody have pictures of an AT with Razor Gen 2? I'm looking at an NX8 4-32, Razor II and T6Xi 5-30 still. One of these days I'll make a decision.
Anybody have pictures of an AT with Razor Gen 2? I'm looking at an NX8 4-32, Razor II and T6Xi 5-30 still. One of these days I'll make a decision.
Skip the razor G2 and get the t6 530
A little AI VS SAKO competition today. My bestest AXSA ES, how did that color go again @Krob95 ?
High winds and 200 yards.
The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.
High winds and 200 yards.
The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.
How’re you liking the pmii 5-25 vs Tangent 5-25? Since you own both scopes. I’m deciding on a pmii 5-25. Or just get another Tangent for my next AI.
ES? You mean the best and most highly accurate color to grace our lifetimes? I will forever regret selling mine
It wasn't a prefit. Custom job done by JR Firearms in the UK.
I've got an injured hand at the moment so controlling the rear bag has quite uncomfortable.. was still sub MOA at 900yds but nothing to shout about.
At 100yds it was .2 -.3 MOA groups all day... prior to my injury...
Don't wear wedding rings folks.. that's all I'll say as the rest is quite graphic
Comparing the s&b to tt (5x25), I'd take the TT for sure. But with the s&b 6x36 I was using yesterday on the TRG, I'd probably pick that over the TT 5x25. My old eyes need some higher magnification
Ah, degloving? I have not the pleasure of experiencing that.It wasn't a prefit. Custom job done by JR Firearms in the UK.
I've got an injured hand at the moment so controlling the rear bag has quite uncomfortable.. was still sub MOA at 900yds but nothing to shout about.
At 100yds it was .2 -.3 MOA groups all day... prior to my injury...
Don't wear wedding rings folks.. that's all I'll say as the rest is quite graphic
I wish you a speedy recovery.
Yes indeed. Fortunately they saved my finger on the night and just needed everything stitching back together.
3 weeks later the wound has healed but still swollen like a balloon.. so trying to get back out shooting but after about 5 minutes of adjusting a bag with just my forefinger and thumb it was getting a bit sore
Thanks..Comparing the s&b to tt (5x25), I'd take the TT for sure. But with the s&b 6x36 I was using yesterday on the TRG, I'd probably pick that over the TT 5x25. My old eyes need some higher magnification
does it need to be 90 degrees? because this grip on an AR is the GOAT of grips and should be excellent on that chassis also.
ERGO FLAT TOP TACTICAL DELUXE GRIP – SUREGRIP® - ERGO Grips
The palm filling Tactical Deluxe Grip with aggressive texture. The top has been made flat so it will fit onto chassis system stocks that take AR-15 type grips. Although this grip will fit on an AR-15 type rifle the back of the grip does not lay flush with the back of the receiver (check out the...
www.ergogrips.net
id run it long before you grip that actually looks acute.
If you don’t need the AI-specific ones, these worked for my legacy R700 AICS (and I suspect would work on the other thumbhole variants of factory AI guns but not sure): https://a.co/d/9xuRrBl
I sympathize. If you give up, these are nice. Not as cool, but nice:
Upgrade in cheek piece for Accuracy International Stocks
I know I saw somewhere, a pad to put on the cheek piece to make it more "tacky" than the stock one. Anyone know what I am thinking of? Thanks in advance.
www.snipershide.com
If you want the 25mm long non-AI ones I have and you’re in North America, dm me your address and I’ll send you them for free. They’re a little too long for my tastes (see link) but they’ll tide you over.
Accuracy International - Cheekpiece Thumbscrew (Single) - 20333
Genuine Accuracy International Cheekpiece Thumbscrews. Price shown is per screw. * Please note these no longer include AI logo. ** Not suitable for new AT-X.
www.sportingservices.co.uk
These are available too. I've ordered from them several times and no issues.Accuracy International - Cheekpiece Thumbscrew (Single) - 20333
Genuine Accuracy International Cheekpiece Thumbscrews. Price shown is per screw. * Please note these no longer include AI logo. ** Not suitable for new AT-X.
Sporting Services - Cheekpiece Thumbscrews (Pair)
Accuracy International compatible Cheekpiece Thumbscrews. Price shown is for a pair. * Not suitable for AT-X.
www.sportingservices.co.uk
The new Vision Grip is supposedly very good from speaking to a couple of the Vision Pro team.
I plan on taking mine apart if i can find directions because the rear left screw was loosish and i never touched it before. I saw my proof barrel a tiny amount tilted to the left torqued to spec and went over all the bolts, that is when i found out one of the action screws was not torqued. It needs deep cleaning so i plan on taking it apart.
That Remington is about as soy as that bed spread.... #notanAI
Last edited:
Beat me to it. Was about to post a Caitlin Jenner photo...
I think they do a pretty good job of adjusting themselves when you least want them to...
.*has not happened to me*
**yet**
I was dm’ing Husky but here it is apart somewhat:
Remove barrel (not mandatory, makes it easier if you have a long handguard/nv bridge)
Remove rear chassis bolt.
Remove front chassis bolt
Remove the bolt behind the mag release
Remove the (whatever you call the hinge/sling thingy)
Rail/chassis comes off
Remove 2 trigger screws
Then remove the 4 action screws the action comes off
Remove barrel (not mandatory, makes it easier if you have a long handguard/nv bridge)
Remove rear chassis bolt.
Remove front chassis bolt
Remove the bolt behind the mag release
Remove the (whatever you call the hinge/sling thingy)
Rail/chassis comes off
Remove 2 trigger screws
Then remove the 4 action screws the action comes off
Attachments
Last edited:
I just took mine apart and torqued it. The rear screws almost felt like they were glued in. Damn near gave up I was afraid to strip them. Torqued the action screws to 35 inch lbs per the manual
The screw behind the mag latch is just for the mag latch. Didn’t have to be removed to remove the action.
Also the sling stud/catch for the folder thing…ya you can remove or install that anytime. Doesn’t connect anything internal. Just that catch itself. It’s really easy to strip the head on….ask how I know
In my defense it definitely was not in there at 8 in lbs 
