We are not as retarded. Most of us are not paying over 1500 for a bipod or 1000 bucks for a 300 dollar rail. I could go on, but the Knights and H&K people are a different breed of retards.
-
Having trouble using the site?
Contact support
So basic general question here. How long do you reckon that the AT will be available now that it has been discontinued. My brother wants one now but wanted to wait until after tax season. I told him that I don’t think he has that long.
I did say "most". I have my reservations about the SR25s and most of the overpriced large frame ARs from Knights, HK, ect. It's not worth it since most of them are lucky to be a consistent 1 MOA gun and good luck trying to be very reliable suppressed.
Okay, UPDATE on Shot Show.
Talked to a rep and told me the following:
AT/AW parts will still be sold indefinitely for now. He told me that the ATLE will still be in production and they have no plans to remove it. Therefore, AT/AW parts will still be manufactured and sold. AT/AW’s will not be sold commercially anymore (obviously from their email) but the parts will be.
Second, he couldn’t give me a reason why they left the firing pin out of the XC but said the bolt lift and feel will be similar to the AXSR action. Said the XC is just a smaller AXSR action. So it’s a totally different bolt and firing pin configuration than the ATX, therefore parts will not be interchangeable.
Further he said the XC is replacing the AXSA for LE which will be discontinued. Also said the XC LE will have a shorter hand guard to accommodate the 16” barrel that the commercial will not be offered in.
Lastly, said they will be coming out with a new “Sniper Gray” color for the ATLE that will only be available for LE. I asked if sniper gray would be available for any commercial firearms and he said they do not have any plans of it for commercial. Said they want to keep that color for LE.
Hope this helps
Talked to a rep and told me the following:
AT/AW parts will still be sold indefinitely for now. He told me that the ATLE will still be in production and they have no plans to remove it. Therefore, AT/AW parts will still be manufactured and sold. AT/AW’s will not be sold commercially anymore (obviously from their email) but the parts will be.
Second, he couldn’t give me a reason why they left the firing pin out of the XC but said the bolt lift and feel will be similar to the AXSR action. Said the XC is just a smaller AXSR action. So it’s a totally different bolt and firing pin configuration than the ATX, therefore parts will not be interchangeable.
Further he said the XC is replacing the AXSA for LE which will be discontinued. Also said the XC LE will have a shorter hand guard to accommodate the 16” barrel that the commercial will not be offered in.
Lastly, said they will be coming out with a new “Sniper Gray” color for the ATLE that will only be available for LE. I asked if sniper gray would be available for any commercial firearms and he said they do not have any plans of it for commercial. Said they want to keep that color for LE.
Hope this helps
I really want to know why companies come out with LE/Mil only models. I mean, we tax payers are paying for it already, we should be able to buy them too. 
I’m sure if someone just has to have a “Sniper Gay” colored AT-XC or AT-X a reasonably competent cerakote artist can get you hooked up.
Not sure why anyone would deviate from God’s chosen color of Sage Green, but some people just have to be heathens I guess.
Not sure why anyone would deviate from God’s chosen color of Sage Green, but some people just have to be heathens I guess.
AI makes elite sand
Every AI guy: “omg what a homo color”
AI makes “sniper gray” and only sells to mil and LE
AI guys when the same rifle hits the px
Every AI guy: “omg what a homo color”
AI makes “sniper gray” and only sells to mil and LE
AI guys when the same rifle hits the px
Pretty sure selling an “LE” AI to a civilian is a super felony
Yeah it’s a joke. Same joke as putting an AX buttstock on an AT or painting the action on an atx makes it law enforcement only
Gonna need to see your papers
LE AI’s have tech that turns bullets into bad-guy heat-seekers, making 90° turns, hiding in beds & waiting to strike (bullets “going to sleep”), delivering toxins, mixing drinks, buying donuts…
We shouldn’t even be talking about this on an open forum!
We shouldn’t even be talking about this on an open forum!
I hear the LE models dont need as much time for the bullets to go to sleep
So they’re more accurate inside 100
AX buttstock $1100 smh
Cheaper than a felony and a couple years in Federal Pound You in The Ass Prison for straw purchasing an AT-LE from your cop buddy
Cheaper than a felony and a couple years in Federal Pound You in The Ass Prison for straw purchasing an AT-LE from your cop buddy
I still think one of the best AI on here was husky’s AXMC with thumbhole. That was bad ass
How if your buddy doesn't fill out the 4473.....
Just cuz your le buddy bought it and had it shipped to his dealer then changed his mind to buy it then your dealer bought it from him then you buy it from the dealer and do the 4473
.. What law was broken...????
Not that I would know
Lol, all my AI's have been bought with the snipers hide px discount.
So they say they are still making parts for the current ATs
Yet parts have been unobtanium for a long time now
Intersting sales strategy
Yet parts have been unobtanium for a long time now
Intersting sales strategy
I saw the post above about the sales rep's quote on that - "indefinitely, for now."
*****
I would bet $5 that the new LE only "sniper gray" will look a lot like elite sand...but since we're talking AI money, that would be $450.
Parts for AI rifles have always been unobtainable within a reasonable timeframe even for brand new current production rifles... Anyone who has owned an AI for longer than a month or ever tried to order a spare part should know this by now, lol. It's been a running joke for 15+ years that your backordered part will arrive "eventually" with no timeframe provided.
I remember waiting 6+ months just for different colored skins for my AT when the AT was less than a year old from the initial release, and 8+ months for different colored plastics and the longer 16" hand guard for my AX when the AX was still the newest and best model in the lineup.
If you think that's bad try ordering spare parts they normally don't like to sell to the consumer like firing pins, firing pin springs, safety levers, etc. No, I don't want to send the entire rifle in for a warranty repair, I just want spare parts for my inventory and can change it myself if needed.
It's an abusive relationship when it comes to anything AI, they hit me because they love me, lol...
My AT was my grail rifle
I wanted that sucker for years and I finally had the coin and MH had a used one with everything I wanted
So I got it
Yeah I’m griping about parts and I’ll just suck it up and get them
Will I sell this rifle? Hell no. It’s ugly, it’s heavy, but it runs no matter the abuse I throw at it
And it’s a 308 so haters unite
Don’t say things you can’t take back!
Yup...try being LH and getting parts.
Part is available via backorder...LMAO. I'm sure that in 4-5 years, I may see a LH AXMC 300 WM bolt body
Nah, the AI models for LE are optimized for shooting dogs. At least the models for Federal contracts.
Had to make a stop to check out Mile High when I was going through Denver in August for the Guardian match at Cameo.
Cashing out got asked if I was LE, had to sadly sigh and say no or the AXMC-LE behind you would be going home with me…….
.
Cashing out got asked if I was LE, had to sadly sigh and say no or the AXMC-LE behind you would be going home with me…….
.
The whole LE specific bolt gun is fucking retarded.
Same thing for the different models of the same damn switch barrel action.
ASR vs AXSR… ATLE vs AT… AXMCLE vs AXMC… ATXC vs ATX… ATXC Mil vs ATXC…
Same thing for the different models of the same damn switch barrel action.
ASR vs AXSR… ATLE vs AT… AXMCLE vs AXMC… ATXC vs ATX… ATXC Mil vs ATXC…
Yes, but people will still line up to purchase one. They will gladly fork out an exorbitant amount for an item that has almost non-existent factory support, or connection/empathy for their consumer base.
Yet the staus symbol of ownership will overcome many, who follow up their "I just got porked in the ass by AI" with "but it's an AI, so it felt smoother." As an AI owner myself, I am starting to master the prison rape victim walk, all the while telling others to GBPSE.
Will not sell a 16" AT in 308 but will let us go ahead and buy a 338LM ASR. Someone make it make sense! But that is par for the course in the firearms industry.
Ive never needed parts but scott has always been extremely helpful with any questions that ive had and has probably talked to me on the phone more than i deserve. My experience is that the customer service is quite good
HK is way way way worse. They go out of their way to make their "civilian" guns and their military/LE guns not even compatible with one another.
Another thing that I often think about is we should be happy civilians get any rifles at all from them to purchase. I kind of doubt civilian sales is whats keeping the lights on there
There is probably some parts that should not take as long to get as they do but we have to remember theyre a small business and military/ le would come first. Just my opinion but if they can only produce so many parts so fast id rather the guys on the front line get them first. These are just toys for us civilians. If you dont like that about AI then buy something else, but it wont be as good
There is probably some parts that should not take as long to get as they do but we have to remember theyre a small business and military/ le would come first. Just my opinion but if they can only produce so many parts so fast id rather the guys on the front line get them first. These are just toys for us civilians. If you dont like that about AI then buy something else, but it wont be as good
Glad I picked up my SR-15 years ago when Brownells had them for right at $2K with mil/le/veteran discount. They’re totally overpriced now though.
If they didn't have le/Gov contacts the price would likely be much lower and more civs would own them making up for the loss. When
.gov is willing to pay nearly anything because it's taxpayer money you jack up the price to make good money. There is really NO reason these AI rifles should cost this much when you compare it to other custom chassis builds. A bit more robust, yes but not nearly 3k+ more. It's .gov pricing.
Similar threads
