Accuracy International Picture Thread

[MOUNTIC]

Who does custom cerakote on plastic? After getting an AW, I think it would be worthwhile getting the AT green to match the old AI green.

If going Flecktarn or other custom camo, @Short-bus is the man. Aka. Custom Gun Coatings.

That pic Rio just posted looks good. Looks like his guy has good ability to match.

 

[Doctorwho1138]

Let me track down 2 sets of skins and I will definitely give this a go and be in touch with both of these vendors.

 

[Huskydriver]

Our guy can likely match up the color. Here's the matching he did with a barreled action. If interested, send an email to us at

[email protected] with what you have and what you're looking to match and we'll have him take a look.


View attachment 8374180

Get that POS Remington out this AI thread....

 

[TheBigCountry]

Our guy can likely match up the color. Here's the matching he did with a barreled action. If interested, send an email to us at

[email protected] with what you have and what you're looking to match and we'll have him take a look.


View attachment 8374180

Not an AI Dave

 

[M8541Reaper]

Going to top the AXSR with a ZCO527.

I wanted to get the S&B 6-36 for it but I heard the ocular is too big for the camera.

Anyone here running a trigger cam on their ZCO topped AI? You like it?

Elite Lunar Sand for tax…

 

[FUNCTIONAL]

IF anyone wants old AI green grip and front panels and trade for their new green I'll give up my og green AT skin pieces.

 

[M8541Reaper]

Chipping away carbon and lowering the bolt lift. #DIYProTip #WhenInDoubtDremelOut

 

[Huskydriver]

View attachment 8374424
Chipping away carbon and lowering the bolt lift. #DIYProTip #WhenInDoubtDremelOut

Finally got that trigger failure in the axsr eh,? Lololol

 

[M8541Reaper]

Finally got that trigger failure in the axsr eh,? Lololol

 

[Huskydriver]

View attachment 8374435

 

[MK20]

IF anyone wants old AI green grip and front panels and trade for their new green I'll give up my og green AT skin pieces.

I do. I'll message you.

 

[TheBigCountry]

View attachment 8374436

 

[PlinkIt]

Who does custom cerakote on plastic? After getting an AW, I think it would be worthwhile getting the AT green to match the old AI green.

Pretty much any cerakote applicator...
If it can take being in your car in the dead of summer it can take the 170 degrees needed to set the H series

Guys are doing custom video game controllers & computer keyboards

If it can take 170 you can put h series on it

grip and mag for example I did in the same h series just to learn more about plastic vs aluminum finishing

 

[Starbridge]

You axsr/at/atx dudes and dudettes using anti seize when swapping barrels?

I’ve hand tightened and expect I could get it off with a wrench if I needed to.

Since we aren’t torquing them down I figured it isn’t needed but curious what you guys are doing.

 

[Doctorwho1138]

You axsr/at/atx dudes and dudettes using anti seize when swapping barrels?

I’ve hand tightened and expect I could get it off with a wrench if I needed to.

Since we aren’t torquing them down I figured it isn’t needed but curious what you guys are doing.

I don’t. Never have had any issues with pulling a barrel off.

 

[TheBigCountry]

You axsr/at/atx dudes and dudettes using anti seize when swapping barrels?

I’ve hand tightened and expect I could get it off with a wrench if I needed to.

Since we aren’t torquing them down I figured it isn’t needed but curious what you guys are doing.

I do

A small dab of nickel anti seize and away I go

And I snap torque the barrel on

 

[TheOfficeT-Rex]

Nickle anti-seize for me. I'd just use grease if I didn't already have the anti seize.

 

[TylerN]

I never used anything more than a small drop of oil on the threads. Since the barrels aren't being torqued on I don't think there's a realistic chance of seizing.

 

[Brym427]

You axsr/at/atx dudes and dudettes using anti seize when swapping barrels?

I’ve hand tightened and expect I could get it off with a wrench if I needed to.

Since we aren’t torquing them down I figured it isn’t needed but curious what you guys are doing.

No and ive never needed a wrench either

 

[Nik H]

You axsr/at/atx dudes and dudettes using anti seize when swapping barrels?

I’ve hand tightened and expect I could get it off with a wrench if I needed to.

Since we aren’t torquing them down I figured it isn’t needed but curious what you guys are doing.

I've never used anti-seize on any of my AI rifles just a little oil

 

[CHEYTAC]

nickel on barrel threads and mating surface of TB Suppressor

 

[800mZero]

You axsr/at/atx dudes and dudettes using anti seize when swapping barrels?

I’ve hand tightened and expect I could get it off with a wrench if I needed to.

Since we aren’t torquing them down I figured it isn’t needed but curious what you guys are doing.

Oil, good hard hand tighten..torque take down screw to spec. Never had one seize or ever be an issue removing.

 

[TheBigCountry]

Oil, like this, works the best

 

[diggler1833]

I use 1 drop of CLP and snap-tight my barrel on.

I'm also guilty of swapping barrels every couple hundred rounds to clean thoroughly. I'm not going to lie, the QC feature has me spoiled in that regard.

 

[M8541Reaper]

When I deep clean AKA rip it complete apart, I’ll put a drop on the threads. I hand tighten and then give a little “boop” with a wrench. Never had an issue with anything locking up.

 

[xxflyingturtlexx]

I used to play this PC game called Arma a bunch, and with the right mods enabled it has fairly realistic ballistics. To get accurate hits with all the realism mods enabled you have to use real world equipment like Kestrels and range finders in realistic ways ... e.g. you have to hold your Kestrel into the wind to get accurate readings and the wind shifts with terrain and ever changing weather. You can even catch trace in your optic under the right circumstances and you have breath control, wobble and all that to deal with as well. With a little bit of tinkering in the mission editor you can turn it into a fun little wind call trainer for a variety of reticles and with the right mods you can even run an AI AXMC in .308, .338LM or .300WM ... figured y'all might get a chuckle out of this.

View attachment 8371445
View attachment 8371446
View attachment 8371447

I played it a ton. Nowadays mostly Squad; and The Finals for fast pace

 

[M8541Reaper]

Out of curiosity whose AXSR has the most rounds on it?

But to answer your question… 3,158 since getting it in Dec 2022.

EDIT: I’m an idiot and put 2023 and not 2022 that’s what I get for posting before 6am while chugging PWO.

 

[Hennig]

What the heck do you do that gives you the time to burn 260 rounds a week!?

 

[M8541Reaper]

What the heck do you do that gives you the time to burn 260 rounds a week!?

I compete with it every month and then hit the range at least once a week if I can.

Desert all around with spots to shoot within 30-45 mins or a 500yd range 15 mins from my door. So it makes it easy,

Which you’d think I’d be a lot better than I am with that many rounds fired

 

[Hennig]

Jesus Christ it’s Jason Bourne.


Maybe I shouldn’t have had kids, that sounds more fun.

 

[J-Ham]

He's a trophy husband...

 

[M8541Reaper]

He's a trophy husband...

Officer Dependa AKA King of Dependapotami

Buttt I did fuck up and put 2023 instead of 2022. It was too early for my brain to process that I’m not shooting a case+ per week.

 

[J-Ham]

Oh, well I'm taking my 'Like' back then! Haha

 

[M8541Reaper]

Oh, well I'm taking my 'Like' back then! Haha

 

[M8541Reaper]

Pics from yesterday’s 0317 range day extravaganza for redemption

Needs more attachments.

This thing is cool as shit: (M118LR)

 

[RS14]

Officer Dependa AKA King of Dependapotami

Buttt I did fuck up and put 2023 instead of 2022. It was too early for my brain to process that I’m not shooting a case+ per week.

View attachment 8375429

Way less impressive now. Lol

 

[diggler1833]

He's a trophy husband...

I am offended...

I am now going to home and shoot off my porch with all sorts of guns that I wouldn't have if my wife wasn't worth a shitload of money...

 

[M8541Reaper]

Way less impressive now. Lol

Literally nothing I do is ever impressive sir. #KeepExpectationsLowAndYoullNeverBeDisappointed

 

[M8541Reaper]

I am offended...

I am now going to home and shoot off my porch with all sorts of guns that I wouldn't have if my wife wasn't worth a shitload of money...

Maybe if my wife wasn’t such a shitbag we’d already have a house on 200 acres in the mountains. But nooooooooooooooooo

 

[diggler1833]

I purchased an Elite Sand 6CM barrel recently. 1:7.25 twist Bartlein.

I'm pretty sure it's due to the color...but that barrel is the most forgiving thing I've ever shot. Haters gonna hate.

 

[M8541Reaper]

I purchased an Elite Sand 6CM barrel recently. 1:7.25 twist Bartlein.

I'm pretty sure it's due to the color...but that barrel is the most forgiving thing I've ever shot. Haters gonna hate.

#ES4Lyfe

 

[diggler1833]

Maybe if my wife wasn’t such a shitbag we’d already have a house on 200 acres in the mountains. But nooooooooooooooooo

It sucks at times. I have to go mow her lawn, and take care of her cattle, and even help her manage her vet clinic. Etc...

She even made me go to college for 7 years.

"A lot of people go to college for seven years."

"I know, they're called doctors." (I'm not).

 

[TheOfficeT-Rex]

Wait... Is everyone else in this thread also sponsored by their wives? Should we have patches and membership cards made?

 

[M8541Reaper]

It sucks at times. I have to go mow her lawn, and take care of her cattle, and even help her manage her vet clinic. Etc...

She even made me go to college for 7 years.

"A lot of people go to college for seven years."

"I know, they're called doctors." (I'm not).

View attachment 8375554

 

[M8541Reaper]

Wait... Is everyone else in this thread also sponsored by their wives? Should we have patches and membership cards made?

Dude… patches and shooting jerseys

 

[diggler1833]

Wait... Is everyone else in this thread also sponsored by their wives? Should we have patches and membership cards made?

I knew when mine bought me a No. 4 Mk 1 (T), that she was "the one".

Actually, she put her foot down for the first time three days ago on my buying a Barrett MRAD in 300NM. Probably was looking out for my best interest because she doesn't want me associating with kids from 'that side of the railroad tracks'.

 

[TheOfficeT-Rex]

Dude… patches and shooting jerseys

Ok but I want my wife's rank on the back above the number. I need to be addressed properly.

 

[diggler1833]

Dude… patches and shooting jerseys

"TTH" (Team Trophy Husbands)

Underneath it can have "MBTY" (Mine's Bigger Than Yours).

Because mine sure didn't marry me for my face, charm, or ability to string together coherent sentences.

 

[M8541Reaper]

Ok but I want my wife's rank on the back above the number. I need to be addressed properly.

"TTH" (Team Trophy Husbands)

Underneath it can have "MBTY" (Mine's Bigger Than Yours).

Because mine sure didn't marry me for my face, charm, or ability to string together coherent sentences.

…let’s move this to a private message group so that way the non-sponsored plebs in this thread stop getting to see how sponsored royalty lives.

 

[MK20]

I knew when mine bought me a No. 4 Mk 1 (T), that she was "the one".

Actually, she put her foot down for the first time three days ago on my buying a Barrett MRAD in 300NM. Probably was looking out for my best interest because she doesn't want me associating with kids from 'that side of the railroad tracks'.

Does she have a sister?

Not asking for a friend...