-
Having trouble using the site?
Contact support
No idea where that potentially patent infringing decal may have originated from...
If anyone’s interested and wants to swap a thumbhole AT for a ATX let me know
www.snipershide.com
SOLD - FS/FT- ATX Gen 3 Elite Sand/Folding
Putting back up for sale or trade Looking to trade for another AI AT. Or to sell this to buy another AT Sale price: $3800 Shipped No barrel. Yours doesn’t need one either What I have: Shown in pics below AI ATX (2022) Elite Sand Comp trigger Full forend bridge 20 moa NV rail Folder MDT...
www.snipershide.com
I had it listed and pulled it. I keep going back and forth on it. If someone has a decent trade or just buys it then it would help make my decision easier haha
I’m looking to do another build like my green AT. It just fits me better. Being I don’t shoot comps the ATX chassis isn’t that much of a benefit to me.
I shoot my AT several times a week currently and I’m just used to that and find it more comfortable
The couple things I want for my upcoming build is bonded chassis (for the reason mentioned in post above and same has been mentioned and tested by @samb300).
I also want the original trigger for the reliability aspect and same trigger as I’m used to. This comp trigger in the ATX is better. It’s actually a fantastic trigger. I just know guys who replaced factory AT triggers with comps and played with adjustments then had issues.
@TheBigCountry has one I’m considering. As do a few others here. I’d prefer an SFP bolt for this one but I have spares if needed
Going to set it up as a 260 Rem and 300 WSM.
Do you guys think I’m overpriced here?
www.snipershide.com
There are pics in that other thread so technically this is picture related
Firearms - Pre 2014 Accuracy International AX338
Hey guys, Thinking I'm going to get into an AXSR if I can find a buyer for this beast. Round count is about 7-800. It has the Huxwrx QD ELR brake on it, but will also come with the factory brake (pictured). Pelican 1750 hard case too. Rifle shoots 0.3 inch groups at 100 yds. Asking: $6,000...
www.snipershide.com
There are pics in that other thread so technically this is picture related
Complete honesty as I’ve looked at your thread recentlyDo you guys think I’m overpriced here?
Firearms - Pre 2014 Accuracy International AX338
Hey guys, Thinking I'm going to get into an AXSR if I can find a buyer for this beast. Round count is about 7-800. It has the Huxwrx QD ELR brake on it, but will also come with the factory brake (pictured). Pelican 1750 hard case too. Rifle shoots 0.3 inch groups at 100 yds. Asking: $6,000...
There are pics in that other thread so technically this is picture related
Yes I do
Pre 14’ guns seem to go much cheaper here. Yours is in line with recent AXMC with quickloc prices in my opinion
I don’t know what barrel life is on that but I’d take barrel life into consideration as well as the fact I’d need tools to swap it
The short action AX models typically struggle to sell around the $3500 mark
You can get quick change axmc for less than your asking price. And axsr for close to your price.Do you guys think I’m overpriced here?
Firearms - Pre 2014 Accuracy International AX338
Hey guys, Thinking I'm going to get into an AXSR if I can find a buyer for this beast. Round count is about 7-800. It has the Huxwrx QD ELR brake on it, but will also come with the factory brake (pictured). Pelican 1750 hard case too. Rifle shoots 0.3 inch groups at 100 yds. Asking: $6,000...
There are pics in that other thread so technically this is picture related
Look at the similar threads section below your post. Those show what rifles loke
Yours have sold for
I think you mean ATX. AX typically are in the $4-5k range. Unless I have missed some fire sales as of late.
The pre 14’ AX. Which is the short action version of the rifle he’s selling.
Yes you’re correct. Typically the AX with SFP bolt and quickloc sell $5500 ish range here
Not the case for the non quickloc model with the AT stock on them
Here’s a couple examples from 2023
Firearms - WTS AI AX pre 14'
Selling my AI pre 14' AX. This is a fantastic rifle but I would like to go a different route. Bipod, optic, mount, 419 brake, and suppressor not included -2013 AX, currently has a factory AI 6.5cm barrel in it with about 1050 rounds put on this season. 6.5 barrel will not include the brake...
www.snipershide.com
Firearms - PRE 2014 AIAX $3100.00
Hello Hide. Looking to sell a Pre 2014 AIAX. Rifle is in great shape. I'm not the original purchaser and have not taken it out. It's chambered in 260 Remington and barrel in 26" long. Fully adjustable stock with monopod. Comes with 1 mag, rail adapters and bipod stud mount. Will ship in original...
www.snipershide.com
Lol
He did ask for the opinion. I’d never crap in someone’s threads but since he asked here I gave an honest opinion
The AXMC ability to change between long and short action cartridges in a matter of minuets, coupled with the stock upgrade for the same price would be a no brainer.
Honestly in today’s market I wouldn’t buy an AI unless it had the quickloc. It’s what makes it such a versatile rifle.
I say when you start adding action wrenches into the equation you can start opening up the discussion to other aftermarket actions as well
FWIW I got my MC for 6k with 2 bolts, 2 barrels, 6 mags and a case. I sold a AX338 for 3500 to fund that purchase. So 6900 for a Pre14AX high as hell.
If I could get an AWM in 300WM for $6K I'd probably buy it and sell my TRG-42. I just prefer the simplicity of that style of chassis over the AX type chassis.
Hey was it you, i think it was; trying to get an opinion without posting price etc on FS section… i gave an opinion and got banned for a week. It was a 22” 6.5 upper.
I hate when ppl post feelers on exchange without pics price etc and get bend out of shape when someone says something.
If it is not you, my sincerest apologies up front.
A long action AT? Can it be done?
That would put your thumbhole AXMC in competition for top spot
Last edited:
I have no idea
When I see someone post something without a price I’ll throw a start bidding process offer or something in there. Need a price per the forum rules but I just give a little poke when I see that. More of a joke than anything. I certainly wouldn’t report it and maybe someday I’ll get banned for it who knows
If it’s a scammer trying to pull the wool over a members eyes I’ll light that thread up. Several of us do. If I get the banhammer for that then so be it
Other than that I really don’t recall. If you find the thread I’d be happy to explain my response. Understand some threads turn into discussions for a bit as well. Sometimes the buyer or seller won’t have an answer so others may pitch in to help. Especially with know members here. It does nothing but help I think
If you’re implying I started a thread asking about an AR 22” upper in the sale area that definitely wouldn’t have been me. I don’t use or play with 6.5 gassers
A long action AT? Can it be done?
That would put your thumbhole AXMC in competition for top spot
No a awm quickloc is a axmc thumbhole... Hard stop
Dont just think someone reported you. There’s a lot of PMSing mods that lurk there that are just looking f for reasons to ban people
Yeah but I have a sweet spot for the AW/AWM look
If I went AXMC again though I’d make one just like yours is/was
Step 1.... Buy awm
Step 2.... Buy axmc
Step 3 debond both
Step 4 rebond axmc action into awm chassis
Step 5 throw axmc chassis away and flex on poors
You have a weird fascination with us poors
I could be wrong but I think the AXMC action is longer and wider in design and uses different mags that need the longer action. Hence won’t fit in the AWM stock. I could be wrong
Either way I need about $25,000 and in the end I’ll have a long action AT and a gun identical to what the guy asking about above has listed for $6900.
And I’ll have neutered a AWM which I’m not sure I’m cool with
Those don't look like they have been ran yet.....
They have in the garage. Scope is at TT getting cleaned & serviced so no live fire. But no feeding issues…unlike when I did before I sent them.
Isn’t that TT new? How is it already back?
I bought an AI AT in 308 in March once AI announced they were discontinuing civilian sales of this model.
I bought 10 AW magazines with it as well.
Tonight I finally got it out and all ten magazines, when filled with ten dummy rounds, cycled flawlessly the first time — no tuning required.
I am excited to finally get this thing to the range in the coming weeks.
Turn-key system? Damn right.
-Stan
I bought 10 AW magazines with it as well.
Tonight I finally got it out and all ten magazines, when filled with ten dummy rounds, cycled flawlessly the first time — no tuning required.
I am excited to finally get this thing to the range in the coming weeks.
Turn-key system? Damn right.
-Stan
It was used from another member here. The parallax knob would shift under the 300PRC recoil so I sent it in. The ELR match had enough time to make those adjustments but it’s something I figured I’d send in for a check. …plus an inspection and cleaning/service is always a good idea on a second hand optic. Better to do it now before next season when I have some down time.
Ok then it was definitely someone else, i am horrible with usernames in general. Sorry
I’m on the edge of my seat every time I see you tag me…I mean ummm I’m seated as far out as Hornady loads them because I’m a poor that doesn’t have a reloading setup…but does have thousands of brass pieces in boxes everywhere…
Bro nearly half a year? Jesus.
What type of angled ARCA adapter is that?
Do you see any issues with elevation angles on a tripod compared to the RRS adapter?
thx
R-Lock/Arca Dovetail Plate: Accuracy International AX Low Profile
Low Profile R-Lock Dovetail plate for AX, AX AICS rifles and chassis to include Mk13. Fits RRS 1.5" R-Lock Dovetail and Arca-Swiss.
www.sawtoothrifles.com
Dependabilt (Sawtooth) ARCA Dovetail plate.
I don’t not see any issues with it mounted to a tripod. It rode a bag really well and actually allowed you to get slightly lower than the RRS BAX on a bag or tripod.
I did have problems with the Sawtooth since that is usually where I would hold the rifle when moving. The RRS BAX felt much better in hand.
Sounds like a fun Match
If I wasn’t blind and it wasn’t the middle of busy season Id be all over it
Similar threads
