Also gives it a light bolt lift unlike other 3 lugs.Effortless primary extraction
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Also gives it a light bolt lift unlike other 3 lugs.Effortless primary extraction
Based on the photo, not a CDG.
It’s a NUC
Complimentary cannoli?
We don’t care what you have in your box, weirdo
is it a giant dildo?
Knee pads and chap stickis it a giant dildo?
Not every box has a dildo in it!is it a giant dildo?
Every box is a dildo if you’re brave enoughNot every box has a dildo in it!
Any chance you could provide an example of the bolt handle options?
To confirm, the black hourglass will not have the machining steel/aluminum shown as in previous photos and video, correct?View attachment 8069902
You will be able to choose red or black for each of these knobs. Your color selection will also apply to the trigger hanger.
That is correctTo confirm, the black hourglass will not have the machining steel/aluminum shown as in previous photos and video, correct?
View attachment 8069902
You will be able to choose red or black for each of these knobs. Your color selection will also apply to the trigger hanger.
As of now we do not have plans for doing that. If there is enough demand we will consider it.In the future will we be able to order the red versions for older actions?
I was all about the fluting, and think it looks great when ready to fire. But I’m not sure I like the partial fluting
Great action features tho
Its definitely something we have talked about.Since you're up Jon, will swept bolt handles be available in the future?
Just the bolt knob and trigger hanger.View attachment 8069393
The black or red is just for the bolt handle?
I would not build anything bigger than a 550 diameter chamber unless my action had 1-1/8" tenon. Just me I guess. The xc is a big'in. I've heard of them setting lugs back on a few different quality brand actions.Currently I am running an LA Archimedes in 30SM a SA Nucleus in 6.5cm i also have a curtis axiom 6GT and a DefianceTenacity 30SM hunting rifle. My Archimedes is my favorite action next to my Nucleus.
I am wanting to get a CDG in a long action with a lapua bolt face. It shows on the site that option does not exist.
When will we be able to order a lapua bolt face?
I am wanting to build a 33xc with this action and will a single feed option be available in the future or will I have to run a sled?
If I pre-order a CDG with a .535 bf and the option to get a lapua bolt face is offered prior to my order being fulfilled will a swap be possible in place of having to purchase the lapua bolt face separately?
I apologize if this question has been asked. I've read through the thread as comments have been added and might have missed something.
Currently I am running an LA Archimedes in 30SM a SA Nucleus in 6.5cm i also have a curtis axiom 6GT and a DefianceTenacity 30SM hunting rifle. My Archimedes is my favorite action next to my Nucleus.
I am wanting to get a CDG in a long action with a lapua bolt face. It shows on the site that option does not exist.
When will we be able to order a lapua bolt face?
I am wanting to build a 33xc with this action and will a single feed option be available in the future or will I have to run a sled?
If I pre-order a CDG with a .535 bf and the option to get a lapua bolt face is offered prior to my order being fulfilled will a swap be possible in place of having to purchase the lapua bolt face separately?
I apologize if this question has been asked. I've read through the thread as comments have been added and might have missed something.
Scroll down to the Add to Cart button.
Still in the planning stages. My 30SM is running along side the 300 Norma Mag so am not looking to go that direction. Am looking at the 338LM improved and 33xc.I would not build anything bigger than a 550 diameter chamber unless my action had 1-1/8" tenon. Just me I guess. The xc is a big'in. I've heard of them setting lugs back on a few different quality brand actions.
When I emailed about exactly this, I was told they might look into it down the road if the demand is thereI would not build anything bigger than a 550 diameter chamber unless my action had 1-1/8" tenon. Just me I guess. The xc is a big'in. I've heard of them setting lugs back on a few different quality brand actions.
Looks like I need to send an email.When I emailed about exactly this, I was told they might look into it down the road if the demand is there
Yep don't pull an Aero precision@Jon_ARC
Is the action wrench for the CDG going to be available to order with the action tomorrow??? It's not on the sight yet.
You'll save yourself a lot of headache's if it is.
My barrel is already ordered, they are just waiting for the final tenon print.