CZ 457

[WeeHooker]

Nice shooting! When you shoot a Vudoo or Rim-X, winning is somewhat expected. When you shoot a CZ, your an underdog. Consequently, there is something extra sweet about kicking but against top end rifles with a CZ. I own a really nice custom Vudoo but still enjoy my CZ's regularly. Largely for just that reason.

 

[Mr. Wolf]

I thought you'll might be interested in what my MTR that I had bedded and shown you how to do it in post #2950. I shoot this competition when I can. Mar 2 was the first one I could shoot this year so instead of using my 40X or Anschutz 54 I decided to shoot my completed CZ 457 that was showing great promise at 100 yards. This competition is shot on the rimfire Palma targets. The targets are scaled for the Palma target at 800, 900 and 1000 yards and for a 22 caliber bullet rather than a 308. The 10 ring is like 1.9 for 800, 1.7 for 900 and 1.55 for 1000. I normally shoot this prone but I broke my kneecap in January so I cannot kneel for 3 months and therefore can go prone. So we have a second relay that are "old" guys that can't or won't go prone. It is shot off of a bench. My set up is a Sinclair front machine rest with a protector rear bag. I was shooting Center-X (speed 329). Right next to me was a friend who is an awesome gunsmith with his new Rim-X that he built himself.

So the competition started and I shot a 150-12X on the first bull. So did the Rim-X. The next bull I shot a 150-13X and so did the Rim-X. AT this point we were the 2 leaders so one of us was going to take first and the other second unless we really blew it. So on the third target (smallest) I shot 150-14X and the Rim-X shot 150-10X And what was really weird was that his 5 10's were on the outside of the 10 ring touching in a circle!!

So my bedded 457 with a Jard trigger and a shimmed bolt to set a tighter headspace beat out a rifle that for sure was 2X in cost. But when I went back and did a comparison of my previous targets, the 40X has never delivered a clean on all 3 targets but with the best of 36X and my Anschutz 54 has delivered a full clean but with a 30 X count and 449 with a 35 X count. I would also point out that my 40X and 54 are in full benchrest stocks.

This now is the the best rifle in my stable and the lowest cost I might add.

So here are the 3 targets thaat were shot yesterday. The X ring on target 3 is .8 inches for reference.

DavidView attachment 8363538

Great shooting! I've been humbled quite a few times by how difficult mini palma shooting can be.

What class did you shoot in and what was your front/rear support?

Thanks for sharing.

 

[Dstoenner]

Great shooting! I've been humbled quite a few times by how difficult mini palma shooting can be.

What class did you shoot in and what was your front/rear support?

Thanks for sharing.

My front rest is a Sinclair benchrest, the 750 version in today’s dollars. My rear rest is a low profile protector with 3/8 channel and the silver slick stuff on the ears. I then carry with me a 1 1/2 inch plywood platform and 2 1/2 leather spacers to adjust the protector to get the right height for everything. This time i had to add the plywood alone and i was good to go.

If i could have gone prone like i normally do i would have been Fopen because I wasn’t using a bipod. I cracked my knee in January so no kneeling for 3 months. Phooey

Edit: I am also running a 3 inch plate that I used to use in an accessory rail. Makes it very stable.


HTH

David

 

[1911Shootist]

With all the mandatory reloads in NRL22 lately, I fired up the 3D printer and am testing a new mag coupler I designed. Working on getting quotes from a local machine shop for an aluminum version, but I'm not sure how much demand there would be for a group run of them... Thoughts?

 

[MLS2GO]

Have you checked with the NRL22 head people to make sure this qualifies as a reload?

 

[lash]

With all the mandatory reloads in NRL22 lately, I fired up the 3D printer and am testing a new mag coupler I designed. Working on getting quotes from a local machine shop for an aluminum version, but I'm not sure how much demand there would be for a group run of them... Thoughts?

View attachment 8368093

View attachment 8368092

I like the idea, but have to ask if you think the aluminum version is necessary or wouldn’t the printed version work just fine?

Serious question.

 

[lash]

Have you checked with the NRL22 head people to make sure this qualifies as a reload?

I cannot imagine why it would not.

One still has to hit the mag latch, remove mag, then insert full mag. Exact same motions as those from guys that have mag holsters on their stock/chassis/receiver.

 

[1911Shootist]

Have you checked with the NRL22 head people to make sure this qualifies as a reload?

There's nothing in the rules, and the stages last month just said "magazine change", so this was not prohibited by MD's at my local match. It is two magazines... But that's still a good point. I'll reach out to them.

 

[1911Shootist]

I like the idea, but have to ask if you think the aluminum version is necessary or wouldn’t the printed version work just fine?

Serious question.

I think 3D printed is just fine, but I can just make another or carry a spare, and I understand many folks prefer aluminum/metal. It would provide a bit more reliability if the mags are mishandled.

 

[kyotekiller25]

I love my 457. Started out as an American, then went down the hole...Got a Bartlein, Boyds Varmint, 8 oz trigger, Area 419 30 MOA base, warne rings, 5-25x Venom. 500 yard hits on a 20" gong with SK long range. It shoots 1 ragged hole at 50 with everything you put in it, and consistent 1" 5 shot groups at 100 with various SK and CCI SV. One of my favorite rifles by far. No loading and no components and cheap ammo is the best part.

 

[JFricke]

Based on the success of @padom and others with straight taper green mountain barrels spun up by manzella & keystone using the eachus chamber on rim-x builds, I'm wondering if anyone has tried this combination a 457. Seems like they hammer and could provide a good "budget" option.

I did some searching and couldn't come up with much.

 

[kyotekiller25]

Did some 50 yard shooting today with the CZ457/Bartlein and 3 types of SK ammo. Standard yellow box, Rifle Match red box, and Long Range Match. Pretty typical of what this does every time. Not the greatest by any means, but decent enough for budget match ammo anyway.

 

[MajorD]

Have you checked with the NRL22 head people to make sure this qualifies as a reload?

Of course it does.people using 10/22’s utilize mag couplers ( those one that attach to the mag base and you flip the mag around and reinsert) all the time.

 

[AR15-SBR]

Early in NRL22, if a person only had 1 mag, removal of the mag, hold in your hand for 5 seconds and replace the mag, was acceptable.

 

[6.5SH]

Early in NRL22, if a person only had 1 mag, removal of the mag, hold in your hand for 5 seconds and replace the mag, was acceptable.

Touching your back pocket with it seems to be the accepted practice at matches I've attended.

 

[1911Shootist]

NRL22 folks have never returned one of my emails, so I’m pushing forward with the project anyway. 1st run of aluminum ones should be done in a few months.

 

[Metzger]

I took my 457 MTR out last week at 50 Yards with Lapua LR. What are your thoughts on the grouping? The unmarked group is the fouling group.

 

[Fasteddie01]

I went to the range with CZ-455 SS Lux, a 457 VMTR, and Savage B22-FV. This was the first time out this year due to deep snow or windy conditions. I had set both the CZs grubs and action screws at 20-ip to test but there was 10-15 km crossing winds so precise adjustments wasn't worth thr trouble. As set up, this turned out OK but in better cond I'll test for any improvements. I only shot 2 boxes of SK, 1 of Plus and one SK-RM. Also a bit of CCI-SV. At 100 I got 1-1.5 groups but this target @ 50 is the real test, targets are numbered in sequence, by colors of numbers. Best group was 0.261" plus a flyer, with the 455. The 457 had 0.339" plus a flyer. Both had avg just over 0.5".

 

[kthomas]

I went to the range with CZ-455 SS Lux, a 457 VMTR, and Savage B22-FV. This was the first time out this year due to deep snow or windy conditions. I had set both the CZs grubs and action screws at 20-ip to test but there was 10-15 km crossing winds so precise adjustments wasn't worth thr trouble. As set up, this turned out OK but in better cond I'll test for any improvements. I only shot 2 boxes of SK, 1 of Plus and one SK-RM. Also a bit of CCI-SV. At 100 I got 1-1.5 groups but this target @ 50 is the real test, targets are numbered in sequence, by colors of numbers. Best group was 0.261" plus a flyer, with the 455. The 457 had 0.339" plus a flyer. Both had avg just over 0.5".
View attachment 8395581

That target hurts my eyes...

 

[sjbryan65]

Anybody got pictures of a 457 mtr 20.5" in a krg bravo with an enclosed forend?

 

[IamAxel]

Anybody got pictures of a 457 mtr 20.5" in a krg bravo with an enclosed forend?

Afaik they don't make an enclosed forened for the 457

 

[sjbryan65]

Afaik they don't make an enclosed forened for the 457

Website says the 700SA model works with the rimfire stocks.

 

[CerebralDistortion]

Anybody got pictures of a 457 mtr 20.5" in a krg bravo with an enclosed forend?

I'm working on it. Might be a month or two yet.

 

[Fasteddie01]

That target hurts my eyes...

Gee, Thanks Richard(s). Too GOOD, huh?
'Bout as good as all the pics 'sideways', too ?

 

[1911Shootist]

Getting closer! Few more weeks and the first run will be back from hard anodizing.

 

[kyotekiller25]

Getting closer! Few more weeks and the first run will be back from hard anodizing.

View attachment 8404364View attachment 8404365

Nice. Do they just clip on then or what? Estimated price?

 

[sjbryan65]

Got my mtr put together in this Bravo with a vision forend today. Haven't seen this setup before but I'm loving it.

 

[rookie7]

View attachment 8302934View attachment 8302935

What chassis is that? thanks

 

[IamAxel]

What chassis is that? thanks

Grey Birch

 

[Cyberbug007]

 

[KalliD]

Got my mtr put together in this Bravo with a vision forend today. Haven't seen this setup before but I'm loving it. View attachment 8404912

How’s the balance with the Vision forend? It must have a bit more weight than the stock one.

 

[sjbryan65]

How’s the balance with the Vision forend? It must have a bit more weight than the stock one.

So with one of their weight kits mounted all the way out at the front and a bipod it is almost perfectly balanced with the 20" mtr barrel. Without the bipod you would need two sets of weights.

Also if you decide to get one I would stick with the vision weights because there is very little room for mlok due to the back bone of the chassis in there. The vision weights come with shorter screws and thinner nuts.

 

[Eo12]

With all the mandatory reloads in NRL22 lately, I fired up the 3D printer and am testing a new mag coupler I designed. Working on getting quotes from a local machine shop for an aluminum version, but I'm not sure how much demand there would be for a group run of them... Thoughts?

View attachment 8368093

View attachment 8368092

That’s pretty sweet. Any chance you’re selling the .stl file or sharing it?

 

[1911Shootist]

That’s pretty sweet. Any chance you’re selling the .stl file or sharing it?

Thanks! No, I don’t share the files for things I sell anymore. Have had them ripped off before and others start selling them.

 

[502Chevelle]

@1911Shootist , that coupler looks sweet. How’s the project going? I could use a couple of those.

 

[1911Shootist]

@1911Shootist , that coupler looks sweet. How’s the project going? I could use a couple of those.

Parts are at anodizing now... Hopefully shipping next week.

 

[Pocket]

got the Pro Varmint for a loaner/base class rig. do i need the weighted 419 arca to balance? or would the metal plain one be enough? getting a victor co cheek riser too.

 

[Barbarosa]

Here is a CZ 457 Jaguar I set up with iron sights, my best group at 50 yards is .308. I did shoot a 198/200 with 8X. S-K Rifle Match

 

[roostercogburn98]

Here is a CZ 457 Jaguar I set up with iron sights, my best group at 50 yards is .308. I did shoot a 198/200 with 8X. S-K Rifle Match

Nice stock. Makes me want to find one and replace the manners I have on my 457 for some reason

 

[UKMan]

What’s going on the factory second Pro Varmint SR at Cabelas used gun library? Definitely not discounted for a factory second but maybe that means CZ is getting ready to send out a shipment of them?

 

[Azshooter1]

CZ 457 Varmint with 6 X 24 50 Viridian Scope and Wild Hunter rings. Shot my best score so far at 25 yards, 247 out of 250.

On to 50 yards for more fun on my next trip. Here's my target:

 

[CerebralDistortion]

Anybody got pictures of a 457 mtr 20.5" in a krg bravo with an enclosed forend?

Never mind the W3 folder...

 

[1911Shootist]

Aluminum couplers are back from hard anodizing and ready to ship! PM me if you’re interested! $50 for the aluminum version, $15 for 3D printed, free US shipping. 100% Minnesota made.

I got to give them a good test a 2 day NRL-X and a few regular matches with no issues. I’ll have them at NRL22 Nationals as well - there might even be one going with a prize gun

 

[Baron85]

What does the magwell on the XLR elements look like for the cz457? Is it a large funnel? From the side profiles on XLR’s sight it appears to be the same size as a regular short action.

I’m wanting to take off my At-one stock and sell it to be replaced by an XLR or the coming soon ACC gen 2 to match my other rifles.

 

[021411]

Anyone here have a newer version (Gen 2) Grey Birch La Chassis? I was wondering how large of a barrel it can accommodate before any modification has to be done. On a whim I took advantage of the limited blowout deal they were having on them a few days ago.

 

[Mr. Wolf]

CZ457 rabbit hole question.
Is it possible to successfully thread the action to receive a threaded shouldered barrel on a CZ457 similar to a Kidd Supergrade? Is the action so pared down or the differences in the metals too great to try something like this? Has anyone done this experiment?

Inquiring minds want to know.
Thanks in advance.

 

[021411]

CZ457 rabbit hole question.
Is it possible to successfully thread the action to receive a threaded shouldered barrel on a CZ457 similar to a Kidd Supergrade? Is the action so pared down or the differences in the metals too great to try something like this? Has anyone done this experiment?

Inquiring minds want to know.
Thanks in advance.

Desert Precision Gunworks does this for sure and I think Zero Dark Precision as well.

 

[Mr.BR]

Desert Precision Gunworks does this for sure and I think Zero Dark Precision as well.

They shrink-fit the barrels not thread the actions

 

[021411]

They shrink-fit the barrels not thread the actions

DPG started threading actions.

 

[Mr.BR]

DPG started threading actions.

If i understand correctly they threaded so that the minor diameter is same as factory prefit !? That is definely something new

No need for parallel bore on the receiver like with shrink fit barrels