Just a heads up, E-Dope® is now iOS compatable with iphone 7 and later running iOS13.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Interesting!
I have a few spots I go to with steel at multiple constant distances.
If there was a way to have something like that that also factored DA with a ballistic solver so basically an updating saved range card.
That would take my money.
Can you range targets while creating a target card (TerrapinX linked to Kestrel 5700) and save multiple cards? Later date just transfer to E-Dope?
That’s a possibility I’m exploringYou could make several range cards in the app and save them.
Then send the one you need for that particular time/day to the card.
That’s a possibility I’m exploring
Three cards per location at 1000, 2500 and 4000 DA( I can fudge the in between) with generalized wind holds.
A bit of work but a clean convenient result.
That’s how I see it.That’s what I’m liking, the cleanliness of the card. These are very cheap (In the sense of cost, not quality) displays. So they won’t do that much. Little pricey for what they are. But it’s a convenience fee.
Works about once out of ten tries for me. Then have to restart my phone as the card is non responsive. I had high hopes but can’t trust or take 5 minutes to update card for stages.
13.3.1.Mine works every time. What version of IOS are you running?
Wrongtarget, any update? Are you able to transfer data reliabley now? If your still having NM problems call the number on the website.
I've just got a new one. Have an iPhone 11 Pro Max and its running iOS 13.4.1. Cant get the E-Dope to update at all through the e-dope app. Tried the position your video suggested, tried taking my phone cover off, restarting the phone, uninstalling/reinstalling the app, no joy. Do you have to enable anything on the phone or e-dope?
How do you get it to update through the kestrel app, read it was compatible with that somehwere?
The way the website is written, if you miss the comma it looks like this works on iOS and well as kestrel link.Where did you read it works with kestrel app? Haven’t seen that anywhere.
Mine works as advertised with iPhone and E-Dope app.
The way the website is written, if you miss the comma it looks like this works on iOS and well as kestrel link.
My Geoballistics IOS looks like it is set up to work with E-Dope.
Can you see if your works?
I sold my last one, because it didn’t have this ability - but judging from below it looks like it might be worth exploring
View attachment 7313903
View attachment 7313904
I've just got a new one. Have an iPhone 11 Pro Max and its running iOS 13.4.1. Cant get the E-Dope to update at all through the e-dope app. Tried the position your video suggested, tried taking my phone cover off, restarting the phone, uninstalling/reinstalling the app, no joy. Do you have to enable anything on the phone or e-dope?
How do you get it to update through the kestrel app, read it was compatible with that somehwere?
I was of the understanding they were all technically iOS compatible, its just there was no iOS app till recently.Wonder if people who can’t get it to work somehow got one of the older ones that isn’t IOS compatible?
How are you meant to tell if you have an old one or not? There are no numbers on the thing. I havent peeled off the velcro to check yet.Unfortunately, the older E-Dope cards aren't iOS compatible. You probably just need to swap the card for a new one.
Directly exported from IPhone from BallisticsARC. I bought direct as well. It’s finicky though. Works about 70% of the time. When it stops working I have to restart my phone, not just the app. I don’t trust it to run a match without a back up blank card to write in just in case unfortunately.
Really no reason for me to use the card if I have to type in the dope. I can write faster lol.I haven’t tried restarting phone. I would just get a black card with BallisticsARC. Edope app works 100% so far. I don’t really use ARC, but I’ll mess around with it a bit.
Really no reason for me to use the card if I have to type in the dope. I can write faster lol.
The settings screen scrolls by swiping up or down. Is that what you mean? Looks like too many things to fit on one screen otherwise.Mine seems to be working reliably with an 11Pro IOS 13.4.1 and BallisticARC (not with AB/Kestrel Link, in IOS, though).
The biggest issue is the lack of documentation. The iPhone needs to be about halfway down the E-dope card, against the card BEFORE pressing Export in BallisticARC for 100% transfer.
View attachment 7324878
Also, note that the “settings” in BallisticARC are almost impossible to see what selections are enabled. This is an issue with the App not, E-dope.
The settings screen scrolls by swiping up or down. Is that what you mean? Looks like too many things to fit on one screen otherwise.
Ahhh yeah I haven’t tried the dark setting. This is the old school look.No. While it the setting toggles (switches) show up well in the image I posted earlier, on the actual phone (using IOS's DARK setting) they are almost impossible to see what setting is selected.
View attachment 7324923
I placed an order few days ago to use it with BallisticsARC. So you can't have both the name of the target and the distance? It's either/or?Directly exported from IPhone from BallisticsARC. I bought direct as well. It’s finicky though. Works about 70% of the time. When it stops working I have to restart my phone, not just the app. I don’t trust it to run a match without a back up blank card to write in just in case unfortunately.
Yeah that’s what I figured out also. I lay mine flat on top like the instructions say to do for an android phone and my iPhone X works perfectly every single time now.Just to note, iphones NFC antenna is on the top edge of the phone. Touching the phone perpendicular or at a 45° works best for transfer. It seems every device has it's own sweet spot for NFC antenna placement!
That page says it only works with android. I don't see any option in my Ballistics Link on the iPhone to export to e-dope. On the other hand, I did learn you can export to a CSV file, which is kind of cool.Anyone with one of these have any luck or try exporting from their Kestrel link app? The link below seems to suggest this but I've not seen hands on use or reports. It would sell me on the edope if I didn't have to do the manual transfer/typing of info.
![]()
E-Dope Card
Sunlight readable, e-Ink display that uploads the Kestrel shooting solutions from your LiNK ballistics app, then attaches to a gun mounted data board allowing shooters to engage multiple targets faster.kestrelmeters.com