When I enter a target direction and speed is it supposed to add the lead to my firing solution on the main display? Right now the only way to see the calculated mover lead is to go to the range card screen. Any help is appreciated.
Elite 5700 Moving Target Question
- Thread starter Jmartin2076
- Start date
Yes. It'll be next to Wind come up, has L next to it. Just remember, it's not accounting for wind. So add wind on top of that
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
OK, so this does not work for me. If I input a target speed I see no change on the main solver screen. Anyone else have any ideas?
[IMG2=JSON]{"data-align":"none","data-size":"full","height":"396","width":"297","src":"http:\/\/i616.photobucket.com\/albums\/tt241\/jmartin2076\/2608981b-a53d-4da7-bae5-fe3d042a816b.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","height":"396","width":"297","src":"http:\/\/i616.photobucket.com\/albums\/tt241\/jmartin2076\/20170717_210417.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","height":"396","width":"297","src":"http:\/\/i616.photobucket.com\/albums\/tt241\/jmartin2076\/2608981b-a53d-4da7-bae5-fe3d042a816b.jpg"}[/IMG2]
[IMG2=JSON]{"data-align":"none","data-size":"full","height":"396","width":"297","src":"http:\/\/i616.photobucket.com\/albums\/tt241\/jmartin2076\/20170717_210417.jpg"}[/IMG2]
Last edited:
It works on my Sportsman. It was confusing me for awhile until I found out how to turn it off.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
On the Target screen you are looking at 2 WIND VALUES.
First value is Wind solution based on the average wind speed. Shown on Range Card as Wnd1.
Seconds value is Wind solution based on the maximum wind speed. Shown on Range Card as Wnd 2.
Make sure that you first set / capture the direction of Fire to then set / capture wind... Wind is given in relationship to DoF.
Last edited:
Similar threads
