M40 Build Guide

Scope rings

I am posting this here because of the subject matter.

I have at least one set (probably two) of the correct rings for an M40 build. The finish is practically NIB but the screws may be buggered a little.
Are they worth $100?
 
I am posting this here because of the subject matter.

I have at least one set (probably two) of the correct rings for an M40 build. The finish is practically NIB but the screws may be buggered a little.
Are they worth $100?

They come up on eBay all the time from $10-$30 bucks..

eta - BNIB set sold for $40 last week...

Regards.
DT

eta - BNIB set sold for $40 last week...only 1 person bid on it
 
Last edited:
Sling swivel Info: Just purchased a suitable set of swivels for the front and rear on a M40ish rifle I'm putting together.
Thy came from Grovtec US, Inc. Part # GTSV - 1 1/4 inside diameter Blk oxide finish. The rear wood screw is 3/4 inch long and of the appropriate diameter not being to fat of a screw. The front machine screw with the correct style ferrule nut is 7/8 inch long.

When you go to their site look under non-detachable locking swivel set, open up the drop box and select the 1 1/4 version, $6.99 a set and the shipping price was fair. I bought 2 sets and I'm happy with them, Are they exact, nope. But until something better comes along they'll
work just fine, and will look period correct.

Regards
 
Last edited:
Just need to park the barreled receiver and aquire a green scope and 40X base. But here's my addition. Built on a 6 digit receiver.
 

Attachments

  • CED17534-1D1F-4859-A072-02E56574198D.jpeg
    CED17534-1D1F-4859-A072-02E56574198D.jpeg
    1.1 MB · Views: 112
Well gents. I finally bought a 6 digit receiver 319,xxx. I have an M40 stock from beever156 on eBay (the forend needs to be tapered a bit, but it has the correct barrel channel and safety bump) I just need to order a barrel from Douglas, blueprint, and slap her together.
 
Well gents. I finally bought a 6 digit receiver 319,xxx. I have an M40 stock from beever156 on eBay (the forend needs to be tapered a bit, but it has the correct barrel channel and safety bump) I just need to order a barrel from Douglas, blueprint, and slap her together.
I’ve had 3 of beever156’s stocks. Agreed on needing some reshaping, but nice wood and good work overall.
 
This is my Beever….there are a few out there like it but this one is mine.

7A8C15DD-9577-4F2C-A24A-64130DC32B7E.jpeg


I didn’t ask LRI to do any reshaping because I was building an M40like not a clone…

C08AE461-7EF4-4CD5-AB77-0CDB409C021C.jpeg


6C99BE04-8A4E-4E3B-9287-1F7E81DEF9D7.jpeg


EF72F583-E08F-4586-BE21-CFBFB3D385FC.jpeg



0C5A2199-15A7-4872-8C69-B32A223DF67E.jpeg


C3B93523-F854-4C26-B527-E3689203878F.jpeg


78D871C7-F558-4825-9B57-2D11C4731964.jpeg


Only criticism I have is I wish the bipod rail was set back toward the action about a beavers hair.

8988E2FE-37D0-4681-AD36-C9B5D0C60237.jpeg


I’m a big fan of Beever.

66364858-3659-4718-A693-180E1E630A41.jpeg
 
Last edited:
  • Love
Reactions: deltawiskey