It's a BAT TR. Their "tactical" line. Most everything they build is for bench rest. But the TR is a very good prs action thus far in my experience. However it's only one so take that for what it's worth.
-
Having trouble using the site?
Contact support
Origin 300wsm and Proof research build.
Remington 700
18" .223 Wylde chamber, MTU contour by Swan Gunsmithing in Queensland Australia,
They also fluted the bolt and installed the handle as well as organised the OD green cerakote,
MDT 20MOA rail, Badger steel rings, NF NXS MIL-R, KAC NV bridge, Atlas CAL.
18" .223 Wylde chamber, MTU contour by Swan Gunsmithing in Queensland Australia,
They also fluted the bolt and installed the handle as well as organised the OD green cerakote,
MDT 20MOA rail, Badger steel rings, NF NXS MIL-R, KAC NV bridge, Atlas CAL.
Built by 360Precision
Impact .223 Wylde
Brux 24” HV
JV Comp
Special barrel coating also by 360
First rifle I have worth showing here
Lone Peak Fuzion
Hawk Hill H Palma 7.7t @ 27” 6.5 prc
Foundation Centurion
Minox ZP5
Lone Peak Fuzion
Hawk Hill H Palma 7.7t @ 27” 6.5 prc
Foundation Centurion
Minox ZP5
May as well show the Tikka I put together for the wife too…… so she’ll keep her hands off my stuff mostly.
20" home brew .223 wylde
The Criterion hybrid barrel is grouping 73 gr eld ammo around 0.8 MOA for 5 shots.
The Criterion hybrid barrel is grouping 73 gr eld ammo around 0.8 MOA for 5 shots.
Barbourcreek BC1400 6.5 prc
Terminus action, Benchmark barrel,Barbourcreek Artemus stock
Thank you. We build these for clients and proof them at 1100 yards
Tried out a new loading of 308 today... Went to the indoor 100 yard tube range, too late to make the sand pit.
GAP HRT with a S&B,
308 168 SMK, 41 Grains of Reloder 15
Just a load to mimic factory ammo and use some powder I have left. Need to get me some more Varget.
Not too shabby for a load picked out of a hat.
GAP HRT with a S&B,
308 168 SMK, 41 Grains of Reloder 15
Just a load to mimic factory ammo and use some powder I have left. Need to get me some more Varget.
Not too shabby for a load picked out of a hat.
New chassis and Sterk bolt handle. The wife doesn't know yet so you get shitty garage pics.
You can’t just pull the ol’ faithful.. “oh I’ve had this one for a while hun” usually works 85% of the time. Although I gotta admit the red chassis might be too noticeable to play that card. Beauty rig!!New chassis and Sterk bolt handle. The wife doesn't know yet so you get shitty garage pics.
View attachment 7761396
Well I thought I was special ...Finally got my KRG in the other day from the Black Friday sale.
Now my rifle looks just like everybody else's rifle...I hate being like everyone.
Good thing is it's on the Chili. It won't matter what it looks like !
Now my rifle looks just like everybody else's rifle...I hate being like everyone.
Good thing is it's on the Chili. It won't matter what it looks like !
Last edited:
I'll share my stick!
Zermatt Origin
26" Criterion 6mm Creedmoor
THE KRG Bravo
Timney 2-stage
MPA BA mount
TBAC Ultra 9
Vortex Razor 4.5-27
My own sponge camo. I have a few green/tan guns so I wanted to do something a little different on my match rifle.
The barrel is a varmint contour. Which was a mistake I see now...I blame myself! At the time I thought this could be a hunting/match rifle so I was trying to save weight. I've realized that is a ridiculous concept. I've since built a kick ass hunting rifle so now I just want this as heavy as practical! Luckily, I chose a barrel burner cartridge so I'll be able to correct my mistake pretty soon!
Zermatt Origin
26" Criterion 6mm Creedmoor
THE KRG Bravo
Timney 2-stage
MPA BA mount
TBAC Ultra 9
Vortex Razor 4.5-27
My own sponge camo. I have a few green/tan guns so I wanted to do something a little different on my match rifle.
The barrel is a varmint contour. Which was a mistake I see now...I blame myself! At the time I thought this could be a hunting/match rifle so I was trying to save weight. I've realized that is a ridiculous concept. I've since built a kick ass hunting rifle so now I just want this as heavy as practical! Luckily, I chose a barrel burner cartridge so I'll be able to correct my mistake pretty soon!
Attachments
Paint job turned outI'll share my stick!
Zermatt Origin
26" Criterion 6mm Creedmoor
THE KRG Bravo
Timney 2-stage
MPA BA mount
TBAC Ultra 9
Vortex Razor 4.5-27
My own sponge camo. I have a few green/tan guns so I wanted to do something a little different on my match rifle.
The barrel is a varmint contour. Which was a mistake I see now...I blame myself! At the time I thought this could be a hunting/match rifle so I was trying to save weight. I've realized that is a ridiculous concept. I've since built a kick ass hunting rifle so now I just want this as heavy as practical! Luckily, I chose a barrel burner cartridge so I'll be able to correct my mistake pretty soon!
300wsm build
-Zermatt Origin Action
-Proof Sendero 20" CF barrel threaded with a deadair brake
-Manners PRS1 in GAP Camo
-Ingenuity Gun works(custom cut to length) rail with Picitiny mount
-Trigger Tech Primary
-Bushnell Forge 3.5-15 x50mm FFP
-Deadair Sandman S
-Zermatt Origin Action
-Proof Sendero 20" CF barrel threaded with a deadair brake
-Manners PRS1 in GAP Camo
-Ingenuity Gun works(custom cut to length) rail with Picitiny mount
-Trigger Tech Primary
-Bushnell Forge 3.5-15 x50mm FFP
-Deadair Sandman S
Last edited:
•TacOps Delta-51 6.5cm
•AI AX w/ a 308 proof cf
•TS Customs LP Fuzion 6.5cm benchmark cf
•DT SRS A1 w/ a TS Customs 6.5cm
•DT SRS A2 w/ a SAC Bartlein 450bm
Some vintage sniper rifles, they're all original, not replicas or clones:
Top to bottom:
• Springfield Model 1898 Krag with Cataract Tool and Optical Co. scope
• Winchester Model 1895 Lee Navy with Winchester A5 scope
• Springfield 1903 A5 with Winchester A5 scope
• Remington 1903A4 with Weaver M73B1
• Remington M40 with Redfield "greenie" scope
• Remington M40 with Redfield "greenie" scope
• Remington 40X with Sionics modified barrel and Leatherwood USMC MCCDC marked scope
Some extremely vintage rifles:
Top to bottom:
• Barrel from a wall gun that was used by Alessandro Farnese's (Pope Paul III) castle guards and has Farnese family crest stamped on it. The Farnese family crest markings have the crossed keys of St. Peter and a papal hat. These papal symbols were added to the Farnese family crest after Alessandro became Pope Paul III in 1534. The primitive peep sights also help date the barrel, these type of sights were used in the early 1500's. The rear sight also has a slot in it for changing the aperture size!
• Military matchlock musket made by Peter Peck. Too much info to type, read this thread if you're interested, this is my rifle - http://www.vikingsword.com/vb/showthread.php?p=167030
• Left to right: 2 large handgonne barrels from the mid 1400's and 2 small handgonne barrels from the 1360/70's. The 2 small handgonne barrels were used in the Battle of Aljubarrota on August 14, 1385. More information on these 4 barrels can be found in these threads (my barrels are from this gentleman's collection): http://www.vikingsword.com/vb/showthread.php?t=18049 and http://www.vikingsword.com/vb/showthread.php?t=10578&highlight=hand+cannon+1400
• A small handgonne barrel from about 1400 in tiller (early wood stock). The barrel is original and is over 600 years old, the tiller is a modern reproduction to make a complete handgonne. These handgonnes had a max effective range of about 25 yards, were quick to reload. Just dump primitive gunpowder in the barrel until it's about 3/4 full and then drop a marble ball in there. Coincidentally, quite a few of these early handgonnes also ended up becoming early hand grenades!
Here's the handgonne from 1400 with some modern upgrayedds, lol:
Top to bottom:
• Springfield Model 1898 Krag with Cataract Tool and Optical Co. scope
• Winchester Model 1895 Lee Navy with Winchester A5 scope
• Springfield 1903 A5 with Winchester A5 scope
• Remington 1903A4 with Weaver M73B1
• Remington M40 with Redfield "greenie" scope
• Remington M40 with Redfield "greenie" scope
• Remington 40X with Sionics modified barrel and Leatherwood USMC MCCDC marked scope
Some extremely vintage rifles:
Top to bottom:
• Barrel from a wall gun that was used by Alessandro Farnese's (Pope Paul III) castle guards and has Farnese family crest stamped on it. The Farnese family crest markings have the crossed keys of St. Peter and a papal hat. These papal symbols were added to the Farnese family crest after Alessandro became Pope Paul III in 1534. The primitive peep sights also help date the barrel, these type of sights were used in the early 1500's. The rear sight also has a slot in it for changing the aperture size!
• Military matchlock musket made by Peter Peck. Too much info to type, read this thread if you're interested, this is my rifle - http://www.vikingsword.com/vb/showthread.php?p=167030
• Left to right: 2 large handgonne barrels from the mid 1400's and 2 small handgonne barrels from the 1360/70's. The 2 small handgonne barrels were used in the Battle of Aljubarrota on August 14, 1385. More information on these 4 barrels can be found in these threads (my barrels are from this gentleman's collection): http://www.vikingsword.com/vb/showthread.php?t=18049 and http://www.vikingsword.com/vb/showthread.php?t=10578&highlight=hand+cannon+1400
• A small handgonne barrel from about 1400 in tiller (early wood stock). The barrel is original and is over 600 years old, the tiller is a modern reproduction to make a complete handgonne. These handgonnes had a max effective range of about 25 yards, were quick to reload. Just dump primitive gunpowder in the barrel until it's about 3/4 full and then drop a marble ball in there. Coincidentally, quite a few of these early handgonnes also ended up becoming early hand grenades!
Here's the handgonne from 1400 with some modern upgrayedds, lol:
Last edited:
Just an F class build, but i've always wanted to have something worth posting. Took me about 4 years from the first part ordered to the first shot (i identify as "a poor" according to some here
). So parts list...
Kelbly Panda action
Bartlien HV 32" 1-9 twist barrel
Bix'nAndy trigger
McMillian XIT stock
Vortex Golden Eagle in Kelbly dovetail rings
Duplin Rorer-Spec bipod
...and the work done by Moon out of KC (thank you, sir)
). So parts list...Kelbly Panda action
Bartlien HV 32" 1-9 twist barrel
Bix'nAndy trigger
McMillian XIT stock
Vortex Golden Eagle in Kelbly dovetail rings
Duplin Rorer-Spec bipod
...and the work done by Moon out of KC (thank you, sir)
Looks great... another 200 yards and those 308's would be hitting that wall, dropping right to the ground!
Though that velocity at 600 looks a bit faster then 308 win...
What caliber?
Though that velocity at 600 looks a bit faster then 308 win...
What caliber?
Just an F class build, but i've always wanted to have something worth posting. Took me about 4 years from the first part ordered to the first shot (i identify as "a poor" according to some here
Kelbly Panda action
Bartlien HV 32" 1-9 twist barrel
Bix'nAndy trigger
McMillian XIT stock
Vortex Golden Eagle in Kelbly dovetail rings
Duplin Rorer-Spec bipod
...and the work done by Moon out of KC (thank you, sir)View attachment 7772125View attachment 7772126
Last edited:
It's a .308. FT/R build. Shooting Berger 200.20x, Lapua Palma brass, 43.5gr Varget, CCI BR-4
during load development i had one that was a 2 SD with 10 ES, but at 100 yards it looked like a snowman with 5 shot groups.
Haven't stretched it past 600 yet, but I'm hoping to get out to Lodi this next year to see how i do at 1000.
during load development i had one that was a 2 SD with 10 ES, but at 100 yards it looked like a snowman with 5 shot groups.
Haven't stretched it past 600 yet, but I'm hoping to get out to Lodi this next year to see how i do at 1000.
Nice rig you got there it’s no poorJust an F class build, but i've always wanted to have something worth posting. Took me about 4 years from the first part ordered to the first shot (i identify as "a poor" according to some here
Kelbly Panda action
Bartlien HV 32" 1-9 twist barrel
Bix'nAndy trigger
McMillian XIT stock
Vortex Golden Eagle in Kelbly dovetail rings
Duplin Rorer-Spec bipod
...and the work done by Moon out of KC (thank you, sir)View attachment 7772125View attachment 7772126
Looks like she shoots (I like the extra shot to it made up for that first one
)
Just an F class build, but i've always wanted to have something worth posting. Took me about 4 years from the first part ordered to the first shot (i identify as "a poor" according to some here
Kelbly Panda action
Bartlien HV 32" 1-9 twist barrel
Bix'nAndy trigger
McMillian XIT stock
Vortex Golden Eagle in Kelbly dovetail rings
Duplin Rorer-Spec bipod
...and the work done by Moon out of KC (thank you, sir)View attachment 7772125
Nice looking rifle. Love the shape of that cheek-piece.
I spend too much time in the bear pit, looking at T&A and eating popcorn. "The German", I believe, doles out wisdom regarding "the poor", while "DirtyD" uses plus size loving to keep the conversations on the straight and narrow.Nice rig you got there it’s no poor
Looks like she shoots (I like the extra shot to it made up for that first one
That was my last "official" match of the year. Had one extra round... and yeah, that first one... I own it. It was me. I was so confident that I didn't need to look at that flag or pay any mind to that breeze sneaking up my calf...
Some sling and iron sight precision in 308 Win
Edit: One from today
Last edited:
First time shooting past 300 yards. Made impacts from 430 yards to 830 yards all by myself which I was pretty happy with; nothing like a wasted 4 hour trip!
